ONET4291TA

最後一次購買

具 AGC 和 RGGI 的 4.25-Gbps 轉阻放大器

產品詳細資料

Type Transimpedance and limiting amplifier Data rate (max) (Mbps) 4250 Supply current (typ) (µA) 17000 Supply current (max) (µA) 25000 Deterministic jitter (typ) (ps) 10 Operating temperature range (°C) -40 to 85
Type Transimpedance and limiting amplifier Data rate (max) (Mbps) 4250 Supply current (typ) (µA) 17000 Supply current (max) (µA) 25000 Deterministic jitter (typ) (ps) 10 Operating temperature range (°C) -40 to 85
DIESALE (Y) See data sheet
  • 2.8-GHz Bandwidth
  • 3.2-k Differential Transimpedance
  • Automatic Gain Control (AGC)
  • 8.3-pA/Hz Typical Input Referred Noise
  • 2-mAp-p Maximum Input Current
  • Received Signal Strength Indication (RSSI)
  • CML Data Outputs With On-Chip 50- Back-Termination
  • On-Chip Supply Filter Capacitor
  • Single 3.3-V Supply
  • Die Size: 0,78 × 1,18 mm
  • APPLICATIONS
    • SONET/SDH Transmission Systems at OC24 and OC48
    • 4.25-Gbps, 2.125-Gbps, and 1.0625-Gbps Fiber-Channel Receivers
    • Gigabit Ethernet Receivers
    • PIN Preamplifier-Receivers

  • 2.8-GHz Bandwidth
  • 3.2-k Differential Transimpedance
  • Automatic Gain Control (AGC)
  • 8.3-pA/Hz Typical Input Referred Noise
  • 2-mAp-p Maximum Input Current
  • Received Signal Strength Indication (RSSI)
  • CML Data Outputs With On-Chip 50- Back-Termination
  • On-Chip Supply Filter Capacitor
  • Single 3.3-V Supply
  • Die Size: 0,78 × 1,18 mm
  • APPLICATIONS
    • SONET/SDH Transmission Systems at OC24 and OC48
    • 4.25-Gbps, 2.125-Gbps, and 1.0625-Gbps Fiber-Channel Receivers
    • Gigabit Ethernet Receivers
    • PIN Preamplifier-Receivers

The ONET4291TA is a high-speed transimpedance amplifier used in optical receivers with data rates up to 4.25 Gbps.

It features a low input referred noise, 2.8-GHz bandwidth, automatic gain control (AGC), 3.2-k transimpedance, and received signal strength indication (RSSI).

The ONET4291TA is available in die form and is optimized for use in a TO can.

The ONET4291TA requires a single 3.3-V supply, and its power-efficient design typically dissipates less than 56 mW. The device is characterized for operation from -40°C to 85°C ambient temperature.

The ONET4291TA is a high-speed transimpedance amplifier used in optical receivers with data rates up to 4.25 Gbps.

It features a low input referred noise, 2.8-GHz bandwidth, automatic gain control (AGC), 3.2-k transimpedance, and received signal strength indication (RSSI).

The ONET4291TA is available in die form and is optimized for use in a TO can.

The ONET4291TA requires a single 3.3-V supply, and its power-efficient design typically dissipates less than 56 mW. The device is characterized for operation from -40°C to 85°C ambient temperature.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet 4.25 Gbps Transimpedance Amplifier with AGC and RGGI datasheet 2005年 9月 15日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
封裝 引腳 下載
DIESALE (Y)

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片