首頁 介面 USB IC USB 轉接驅動器與多工器

第一代雙通道 USB 3.0 轉接驅動器

SN65LVPE502A 不建議用於新設計
儘管為了支援以前的設計而繼續生產此項產品,但我們並不建議用在新設計上。考量下列其中一項替代產品:
open-in-new 比較替代產品
引腳對引腳的功能與所比較的產品相同
TUSB522P 現行 第四代雙通道 USB 3.0 轉接驅動器 This product complies to newer USB specifications

產品詳細資料

Type Redriver Function USB 3.0 USB speed (MBits) 5000 Number of channels 2 Rating Catalog Operating temperature range (°C) -40 to 85
Type Redriver Function USB 3.0 USB speed (MBits) 5000 Number of channels 2 Rating Catalog Operating temperature range (°C) -40 to 85
VQFN (RGE) 24 16 mm² 4 x 4 VQFN (RLL) 24 9 mm² 3 x 3
  • Single-Lane USB 3.0 Redriver and Equalizer
  • Selectable Equalization, De-Emphasis and Output Swing Control
  • Integrated Termination
  • Hot-Plug Capable
  • Low Active Power (U0 state):
    • 315 mW (Typical), VCC = 3.3 V
  • USB 3.0 Low Power Support:
    • 7 mW (Typical) When No Connection Detected
    • 70 mW (Typical) When Link in U2/U3 Mode
  • Excellent Jitter and Loss Compensation Capability:
    • >40 in of Total 4 mil Stripline on FR4
  • Small Footprint, 3 mm × 3 mm and 4 mm × 4 mm, 24-Pin VQFN Packages
  • High Protection Against ESD Transient:
    • HBM: 5,000 V
    • CDM: 1,500 V
    • MM: 200 V
  • Single-Lane USB 3.0 Redriver and Equalizer
  • Selectable Equalization, De-Emphasis and Output Swing Control
  • Integrated Termination
  • Hot-Plug Capable
  • Low Active Power (U0 state):
    • 315 mW (Typical), VCC = 3.3 V
  • USB 3.0 Low Power Support:
    • 7 mW (Typical) When No Connection Detected
    • 70 mW (Typical) When Link in U2/U3 Mode
  • Excellent Jitter and Loss Compensation Capability:
    • >40 in of Total 4 mil Stripline on FR4
  • Small Footprint, 3 mm × 3 mm and 4 mm × 4 mm, 24-Pin VQFN Packages
  • High Protection Against ESD Transient:
    • HBM: 5,000 V
    • CDM: 1,500 V
    • MM: 200 V

The SN65LVPE502x devices are dual-channel, single-lane USB 3.0 redriver and signal conditioners supporting data rates of 5 Gbps. The devices comply with USB 3.0 specification revision 1.0 supporting electrical idle condition and low frequency periodic signals (LFPS) for USB 3.0 power management modes.

The SN65LVPE502x devices are dual-channel, single-lane USB 3.0 redriver and signal conditioners supporting data rates of 5 Gbps. The devices comply with USB 3.0 specification revision 1.0 supporting electrical idle condition and low frequency periodic signals (LFPS) for USB 3.0 power management modes.

下載 觀看有字幕稿的影片 影片

特別說明

SN65LVPE502ASN65LVPE502B 提供兩種不同的針腳配置,可實現靈活佈局。先前版本 SN65LVPE502CP 的所有勘誤項目均已在這些裝置中修復。提供更小的 3mm x 3mm 封裝選項。

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 3
類型 標題 日期
* Data sheet SN65LVPE502x Dual-Channel USB 3.0 Redriver and Equalizer datasheet (Rev. C) PDF | HTML 2016年 11月 11日
Application note SN65LVPE502A Schematic Checklist 2018年 5月 30日
Application note SN65LVPE502A to TUSB522P Change 2016年 8月 15日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬型號

SN65LVPE502 HSPICE Model (Rev. A)

SLLM207A.ZIP (627 KB) - HSpice Model
模擬型號

SN65LVPE502A IBIS Model (Rev. B)

SLLC432B.ZIP (20019 KB) - IBIS Model
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
封裝 引腳 下載
VQFN (RGE) 24 檢視選項
VQFN (RLL) 24 檢視選項

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片