SN74ALVCH16344

現行

具有匯流排電位保持和 3 態輸出的 8 通道、1.65V 至 3.6V 緩衝器

立即訂購

產品規格表

document-pdfAcrobat SN74ALVCH16344 datasheet (Rev. H) (英文)

SN74ALVCH16344

現行

產品規格表

立即訂購

產品詳細資料

Technology family

ALVC

Number of channels

8

IOL (max) (mA)

24

Supply current (max) (µA)

40

IOH (max) (mA)

-24

Input type

Standard CMOS

Output type

3-State

Features

Balanced outputs, Bus-hold, Damping resistors, Over-voltage tolerant inputs, Very high speed (tpd 5-10ns)

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Technology family

ALVC

Number of channels

8

IOL (max) (mA)

24

Supply current (max) (µA)

40

IOH (max) (mA)

-24

Input type

Standard CMOS

Output type

3-State

Features

Balanced outputs, Bus-hold, Damping resistors, Over-voltage tolerant inputs, Very high speed (tpd 5-10ns)

Rating

Catalog

Operating temperature range (°C)

-40 to 85

SSOP (DL)

56

190.647 mm² (18.42 mm × 10.35 mm)

TSSOP (DGG)

56

113.4 mm² (14 mm × 8.1 mm)

Member of the Texas Instruments Widebus™ Family
Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors
Latch-Up Performance Exceeds 250 mA Per JESD 17
ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)

Widebus is a trademark of Texas Instruments.

Member of the Texas Instruments Widebus™ Family
Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors
Latch-Up Performance Exceeds 250 mA Per JESD 17
ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)

Widebus is a trademark of Texas Instruments.

This 1-bit to 4-bit address driver is designed for 1.65-V to 3.6-V V_CC operation.

The SN74ALVCH16344 is used in applications in which four separate memory locations must be addressed by a single address.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.

This 1-bit to 4-bit address driver is designed for 1.65-V to 3.6-V V_CC operation.

The SN74ALVCH16344 is used in applications in which four separate memory locations must be addressed by a single address.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.

filter

尋找其它非反相緩衝器和驅動器

下載觀看有字幕稿的影片影片