SN74HC595B
- 8-Bit Serial-In, Parallel-Out Shift Registers
- Available in Ultra Small Logic QFN package(0.5 mm
max height) - Over-Voltage Tolerant on Inputs Independent of Vcc
- Wide Operating Voltage Range of 2 V to 6 V
- High-Current 3-State Outputs Can Drive Up to 15
LSTTL Loads - Low Power Consumption: 80-µA (Maximum) ICC
- tpd = 13 ns (Typical)
- ±6-mA Output Drive at 5 V
- Low Input Current: 1 µA (Maximum)
- Shift Register Has Direct Clear
- -55oC to 125oC Operating Temperature
The SN74HC595B devices contain an 8-bit, serial-in, parallel-out shift register that feeds an 8-bit D-type storage register. The storage register has parallel 3-state outputs. Separate clocks are provided for both the shift register and storage register. The shift register has a direct overriding clear (SRCLR) input, serial (SER) input, and serial outputs for cascading. When the output-enable (OE) input is high, the all outputs are in the high-impedance state except QH.
技術文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 17 設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
參考設計
TIDA-01233 — 超小型、靈活的 LED 擴展參考設計
本文件介紹兩項參考設計,分別採用具 3 態輸出暫存器的 SN74HC595B 8 位元移位暫存器,以及具 3 態輸出的 SN74LVC244A 八通道緩衝器,用以將微控制器上的三個通用輸出腳位擴展為八個甚至更多的輸出。這兩款裝置皆採用超小型 X2SON 封裝。七段顯示器驅動器參考設計著重於以可安裝於顯示模組下方的硬體,獨立控制七段顯示器中的八顆 LED。8×8 LED 矩陣參考設計旨在驅動排列為 8×8 矩陣的 64 顆 LED,並可透過面板化方式擴充為更大型的顯示系統。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| X1QFN (RWN) | 16 | Ultra Librarian |
訂購與品質
內含資訊:
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊:
- 晶圓廠位置
- 組裝地點