SN74LVC3G07-Q1
- Qualified for Automotive Applications
- Supports 5-V VCC Operation
- Max tpd of 3.7 ns at 3.3 V
- Low Power Consumption, 10-µA Max ICC
- ±24-mA Output Drive at 3.3 V
- Input and Open-Drain Output Accepts Voltages up to 5.5 V
- Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C
- Typical VOHV (Output VOH Undershoot) >2 V at VCC = 3.3 V, TA = 25°C
- Ioff Supports Partial-Power-Down Mode Operation
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
- ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)
- 1000-V Charged-Device Model (C101)
This triple buffer/driver is designed for 1.65-V to 5.5-V VCC operation.
The output of the SN74LVC3G07 is open drain and can be connected to other open-drain outputs to implement active-low wired-OR or active-high wired-AND functions. The maximum sink current is 32 mA.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
技術文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 29 設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
5-8-LOGIC-EVM — 適用於 5 針腳至 8 針腳 DCK、DCT、DCU、DRL 和 DBV 封裝的通用邏輯評估模組
靈活的 EVM 旨在支援任何針腳數為 5 至 8 支且採用 DCK、DCT、DCU、DRL 或 DBV 封裝的裝置。
使用指南: PDF
參考設計
TIDM-1003 — 適用於 PM 或 BLDC 馬達的低電壓、50A 無感測器 FOC 參考設計
此設計為 30V 至 54V 無刷 DC 馬達 (BLDC) 或永磁同步馬達 (PMSM) 控制器,適合低電壓、高電流、高功率的電動自行車、電動工具、風扇與幫浦應用。此設計使用德州儀器的 UCC27211D MOSFET 驅動器、CSD19506KCS 80V NexFET™ 功率 MOSFET、搭載 InstaSPIN™ 技術的 TMS320F28027F 微控制器、TPS54360 降壓轉換器及 LDO。本設計運用 InstaSPIN-FOC 技術來識別與調整 PMSM 或 BLDC 馬達參數,並透過外部油門控制馬達速度。整體而言,此設計著重於展示高功率、低電壓 BLDC 或 PMSM (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VSSOP (DCU) | 8 | Ultra Librarian |
訂購與品質
內含資訊:
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊:
- 晶圓廠位置
- 組裝地點