TMP9R01-SP
- QMLP, Radiation Hardness Assured (RHA)
- SMD 5962-17218:
- TID characterized up to 100krad(Si)
- TID RLAT/RHA to 100krad(Si)
- SEL immune to LET= 75MeV×cm2/mg at 125°C
- SEE characterized to LET= 75MeV×cm2/mg
- SEFI characterized to LET= 75MeV×cm2/mg
- QMLV version available: TMP461-SP
- Radiation Tolerant (Space Enhanced Plastic)
- Vendor item drawing (VID) V62/24615
- TID characterized up to 50krad(Si)
- TID RLAT/RHA to 30krad(Si)
- SEL immune to LET= 43MeV×cm2/mg at 125°C
- SEE characterized to LET= 43MeV×cm2/mg
- SEFI characterized to LET= 43MeV×cm2/mg
- Temperature accuracy and range:
- 12-bit resolution: 0.0625°C (LSB)
- Local (on-chip) temp accuracy: ±2.0°C (Max)
- Remote junction temp accuracy: ±1.5°C (Max)
- Remote range tested to: –64°C to 191°C
-
Military temperature range: -55 to 125°C
- Small-size package: VSSOP-10, 4.9mm × 3.0mm
- Integrated calibration/ protection features:
- η-factor and offset correction
- Series resistance cancellation
- Remote BJT/diode fault detection
- Programmable digital filter
- Wide operating range, low power:
- Voltage supply range: 1.7V to 3.6V
- I/O voltages: 1.8V, 2.5V, and 3.3V
- Standby/shutdown IQ: 15µA/3µA
The TMP9R01-SP (QML Class P) and TMP9R01-SEP (Radiation Tolerant, Space EP) are high-accuracy digital I2C temperature sensors integrating a 12-bit ADC, bias current sources, and calibration circuitry in a 10-pin VSSOP plastic package. The devices measure remote temperature by forcing a bias current through an external BJT or the integrated diode/junction of an FPGA, ADC, or ASIC, digitizing the resulting ΔVBE and reporting temperature with 0.0625°C resolution. An additional on-chip sensor provides local temperature measurement.
The TMP9R01-SP and TMP9R01-SEP incorporate multiple calibration and protection features, including series-resistance cancellation, programmable non-ideality factor (η-Factor), offset correction, and programmable digital filter. Designers can set high- and low-temperature limits that drive the ALERT output for over-and-under temperature thermal protection. Up to 9 pin-selectable I2C/SMBus addresses allow multiple sensors on the same I2C bus. The devices are designed for multi-location spacecraft housekeeping, satellite telemetry, avionics, and other high-reliability applications that require precise, temperature sensing and with varying levels of radiation hardness.
The TMP9R01-SP is also available as a functionally equivalent QMLV-RHA device: TMP461-SP.
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 日期 |
|---|---|---|---|---|
| * | Data sheet | TMP9R01-SP (QMLP RHA) and TMP9R01-SEP (Radiation Tolerant) Space-Grade, I2 C Digital Temperature Sensor With Remote and Local (On-Chip) Temperature Sensing datasheet (Rev. A) | PDF | HTML | 2026年 7月 8日 |
| * | Radiation & reliability report | TMP9R01-SP Plastic Neutron Displacement Damage (NDD) Characterization Report | 2026年 6月 22日 | |
| * | Radiation & reliability report | TMP9R01-SP Total Ionizing Dose (TID) Report | 2026年 6月 19日 | |
| * | Radiation & reliability report | TMP9R01-SP Single-Event Effects (SEE) Radiation Test Report (Rev. A) | PDF | HTML | 2025年 6月 17日 |
| Application note | How to Optimize Space-Grade Temperature Sensing Designs | PDF | HTML | 2025年 10月 27日 | |
| Product overview | TI Space Qualified Temperature Sensor Product Selection Guide (Rev. A) | PDF | HTML | 2025年 1月 22日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
TMP9R01EVM — TMP9R01 評估模組
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VSSOP (DGS) | 10 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中的可靠性監測
- 晶圓廠位置
- 組裝地點