TVS2210
- Protection against ±1kV, 42Ω IEC 61000-4-5 surge test for industrial signal lines
- Maximum clamping voltage of 28V at 25A of 8/20µs surge current
- Robust surge protection:
- IEC 61000-4-5 (8/20µs): 25A
- Integrated IEC 61000-4-2 ESD protection
- Tiny 1.0mm x 0.6mm footprint
The TVS2210 robustly shunts up to 25A of IEC 61000-4-5 fault current to protect systems from high power transients or lightning strikes. The device offers a solution to the common industrial signal line EMC requirement to survive up to ±1kV IEC 61000-4-5 open circuit voltage coupled through a 42Ω impedance.
The TVS2210 uses a unique feedback mechanism for precise flat clamping during a fault, allowing system exposure below 30V. The tight voltage regulation allows designers to confidently select system components with a lower voltage tolerance, lowering system costs and complexity without sacrificing robustness.
In addition, the TVS2210 is available in a small, non-encapsulated 1.0mm × 0.6mm footprint which is designed for space constrained applications. The extremely low device leakage and capacitance causes a minimal effect on the protected line.
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | TVS2210 22V Flat-Clamp Surge Protection Device datasheet | PDF | HTML | 2025年 12月 17日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| PICOSTAR (YMZ) | 2 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。