LM3495EVAL

適用於低輸出電壓的模擬峰值電流模式降壓控制器

LM3495EVAL

立即訂購

概覽

The Evaluation Board has been designed for testing of various circuits using the LM3495 buck regulator controller. A complete schematic for all the components is shown in Figure 3. The board is four layers, consisting of signal/power traces on top and bottom, one internal ground plane, and an internal split power plane. The top and bottom planes are 1oz. copper, internal planes are 1/2oz., and the board is 62mil FR4 laminate.

特點
  • Input voltage from 2.9V to 18V
  • Output voltage adjustable from 0.6V to 5.5V
  • Feedback Accuracy 1%
  • Low-side Sensing, Programmable Current Limit without sense resistor
  • Input Under Voltage Lockout
  • Hiccup mode current limit protection eliminates thermal runaway during fault conditions
  • Internal soft start with tracking capability
  • 200 kHz to 1.5 MHz Switching frequency, Synchronizable
  • On-chip gate drivers
  • Soft output discharge during shutdown
  • Startup into output pre-bias
  • Operation from a single input rail
  • Adaptive Duty Cycle Limit
  • TSSOP-16 package

Applications

  • Wide input voltage buck converters with low voltage, high accuracy outputs
  • Core logic regulators
  • High-efficiency buck regulation

 

AC/DC 和 DC/DC 轉換器 (整合式 FET)
LM3495 2.9V 至 18V,模擬峰值電流模式降壓控制器
下載 觀看有字幕稿的影片 影片

訂購並開始開發

開發板

LM3495EVAL/NOPB — Emulated Peak Current Mode Buck Controller for Low Output Voltage

支援產品和硬體
有庫存
限制:
TI.com 上缺貨
TI.com 無法提供

LM3495EVAL/NOPB Emulated Peak Current Mode Buck Controller for Low Output Voltage

close
版本: null
發行日期:
適用 TI 的評估品項標準條款與條件。

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 2
類型 標題 下載最新的英文版本 日期
使用指南 LM3495 Buck Controller Evaluation Module User's Guide (Rev. C) 2022/2/1
證書 LM3495EVAL/NOPB EU Declaration of Conformity (DoC) 2019/1/2

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援