TIDA-011001

TIDA-011001

設計檔案

概覽

This reference design presents a high-density, four-channel, digitally controlled programmable power supply targeting burn-in and reliability test applications. The design support 12VDC input bus and delivers four independently regulated output channels, each adjustable from 0V to 5V with a maximum continuous output current of 6A per channel.

The control architecture centers on C2000™ real-time microcontroller (MCU), which executes a 2P2Z (two-pole, two-zero) digital compensator. A 16-bit quad-channel DAC dynamically modulates the buck power module output by feedback-pin current injection. While a 24-bit, 16-channel SAR ADC simultaneously captures current and voltage telemetry with integrated low drift PGA, the design can achieves a load regulation error of less than ±0.005% of full scale across the full load range.

特點
  • Four independent output channels programmable from 0V to 5VDC
  • Current clamping integrated in the digital control loop; no external analog limiting circuitry required
  • High accuracy load regulation:
    • Voltage load regulation: < ±0.25mV (±0.005% of 5V Full Scale)
    • Current load regulation: < ±0.3mA (±0.005% of 6A Full Scale)
  • 16-bit DAC resolution for sub-millivolt output voltage setpoints
  • Simultaneous 24-bit Telemetry with multichannel precision SAR ADC for synchronous current and voltage monitoring at up to 125kSPS per channel.
  • Output voltage settling time < 200µs from no-load to full load condition
輸出電壓選項 TIDA-011001.1
Vin (最小值) (V) 12
Vin (最大值) (V) 17
Vout (Nom) (V) 5
Iout (最大) (A) 6
輸出功率 (W) 30
隔離式/非隔離式 Non-Isolated
輸入類型 DC
拓撲結構 Buck- Integrated Switch
下載 觀看有字幕稿的影片 影片

已開發完全組裝的電路板,僅供測試與性能驗證,且為非賣品。

設計檔案與產品

設計檔案

下載立即可用的系統檔案以加速您的設計流程。

PDF | HTML
TIDUFK0.PDF (1197 KB)

參考設計概觀與已驗證的性能測試資料

TIDMEC6.PDF (742 KB)

元件配置的詳細設計佈線圖概觀

TIDMEC8.PDF (150 KB)

設計元件、參考指示項與製造商/零件編號的完整清單

TIDMEC7.ZIP (5493 KB)

IC 元件的 3D 模型或 2D 圖所使用的檔案

TIDCGZ1.ZIP (1535 KB)

包含 PCB 設計中實體電路板層相關資訊的設計檔案

TIDMEC5.PDF (1893 KB)

產生 PCB 設計佈線圖所使用的 PCB 層圖表檔案

TIDMEC4.PDF (1396 KB)

設計佈線圖與元件的詳細電路圖

產品

設計與潛在替代方案中包括 TI 產品。

一般用途運算放大器

OPA4990 — 四通道、40-V、1.1-MHz、低功耗 (0.12 mA) 運算放大器

產品規格表: PDF | HTML
電源模組 (整合式電感器)

TPSM8F7620 — 4V 至 17V,電流模式,四路 6A 堆疊式降壓電源模組

產品規格表: PDF | HTML
精確 ADC

ADS9308V8I — 24 位元、125kSPS、16 通道單電源 SAR ADC,具備 8 個電壓感測輸入與 8 個電流感測輸入

產品規格表: PDF | HTML
精密 DAC (≤10 MSPS)

DAC80508 — 具有精密內部參考的真正 16 位元、8 通道、SPI、電壓輸出 DAC

產品規格表: PDF | HTML
即時馬達控制與自動化 MCU

TMS320F28P650DK — C2000 ™ 32 位元 MCU、2x C28x +CLA CPU、鎖階、1.28-MB 快閃記憶體、16-b ADC、HRPWM、EtherCAT、CAN-FD、AES

產品規格表: PDF | HTML
串聯電壓參考

REF50 — 低雜訊、極低漂移、寬 VIN 精密電壓參考

產品規格表: PDF | HTML

技術文件

star
= TI 所選的重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 1
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 設計指南 TIDA-011001 Quad-Channel 6A, 0-5V Programmable Power Supply Reference Design PDF | HTML 2026/10/19

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。

影片