TIDEP0024
使用 LPDDR2 的 AM437x 低功耗待機模式
TIDEP0024
概覽
This low power mode implementation realizes processor power consumption less than 0.1 mW while keeping LPDDR2 memory in self refresh consuming ~ 1.6 mW. The system solution is comprised of AM437x Sitara processor, LPDDR2 memory and TPS65218 power management IC and optimized for new low power mode along with support for legacy low power modes. The processor power is minimized by turning off all the processor power supplies except RTC power supply. System power state transitions including power supply control can be performed by single interface signal (PMIC_PWR_EN signal) with PMIC register programming.
特點
- Suspend to RAM with the lowest system power mode
- AM437x in RTC-only mode
- TPS65218 in suspend state
- LPDDR2 in self refresh
- System can resume back to the state it was before suspending
- RTC-only suspend power consumption
- AM43x + TPS65218: < 0.1 mW
- Typical 2Gb LPDDR2: 1.6 mW
- Suspend Events by:
- By programming RTC registers
- By setting up the RTC alarm
- Resume Events:
- RTC alarm goes off
- PMIC push button or AC power detection
- Resume Time
- < 300 msec hardware latency
- < 1 sec for software to resume to previous state (depending on application use case)
- This design is tested and includes schematics, BOM, and design guide.
已開發完全組裝的電路板，僅供測試與性能驗證，且為非賣品。
設計檔案與產品
設計檔案
下載立即可用的系統檔案以加速您的設計流程。
產品
設計與潛在替代方案中包括 TI 產品。
技術文件
=
TI 所選的重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
| 類型 | 標題 | 下載最新的英文版本 | 日期 | |||
|---|---|---|---|---|---|---|
| * | 設計指南 | AM437x Low-Power Suspend Mode With LPDDR2 Design Guide | 2014/10/3 |