Home Data converters Integrated & special-function data converters Medical AFEs Biosensing AFEs
Home
Data converters
Integrated & special-function data converters
Medical AFEs
Biosensing AFEs

AFE4403

ACTIVE

Ultra-Small Integrated Analog Front End (AFE) for Heart-Rate Monitors and Low-Cost Pulse Oximeters

Order now
Data sheet

AFE4403

ACTIVE
Data sheet Order now

Product details

Applications Clinical fingertip pulse oximetry, SpO2 Number of input channels 1 Resolution (Bits) 22 Number of LEDs 3 Interface type SPI Operating temperature range (°C) -20 to 70 Rating Catalog
Applications Clinical fingertip pulse oximetry, SpO2 Number of input channels 1 Resolution (Bits) 22 Number of LEDs 3 Interface type SPI Operating temperature range (°C) -20 to 70 Rating Catalog
DSBGA (YZP) 36 10.5625 mm² 3.25 x 3.25
  • Fully-Integrated AFE for Pulse Oximeter and Heart Rate Monitoring Applications:
  • Transmit:
    • Integrated Dual LED Driver (H-Bridge or Common Anode)
    • Option for a Third LED Support for Optimized SPO2, HRM, or Multi-Wavelength HRM
    • Up to 110-dB Dynamic Range
    • LED Current:
      • Programmable to 100 mA with 8-Bit Current Resolution
    • 30 µA + Average LED Current
    • Programmable LED On-Time
    • Independent LED2 and LED1 Current Reference
  • Receive Channel with High Dynamic Range:
    • 22-Bit Output in Twos Complement Format
    • Up to 105-dB Dynamic Range
    • Low Power: < 650 µA
    • Dynamic Power-Down Mode to Reduce Current to 300 µA
    • Adaptable to a Very Wide Range of Signal Amplitudes:
      • Total Programmable Gain: 10 kΩ to 4 MΩ
    • Integrated Digital Ambient Estimation and Subtraction
  • Flexible Clocking by External Clock or Crystal:
    • Pulse Frequency: 62.5 SPS to 2000 SPS
    • Flexible Pulse sequencing and Timing Control
    • Input Clock Range: 4 MHz (Min) to 60 MHz (Max)
  • Integrated Fault Diagnostics:
    • Photodiode and LED Open and Short Detection
  • Supplies:
    • Rx = 2.0 V to 3.6 V
    • Tx = 3.0 V to 5.25 V
  • Package: Compact DSBGA-36 (3.07 mm × 3.07 mm × 0.5 mm)
  • Specified Temperature Range: 0°C–20°C to 70°C
  • Fully-Integrated AFE for Pulse Oximeter and Heart Rate Monitoring Applications:
  • Transmit:
    • Integrated Dual LED Driver (H-Bridge or Common Anode)
    • Option for a Third LED Support for Optimized SPO2, HRM, or Multi-Wavelength HRM
    • Up to 110-dB Dynamic Range
    • LED Current:
      • Programmable to 100 mA with 8-Bit Current Resolution
    • 30 µA + Average LED Current
    • Programmable LED On-Time
    • Independent LED2 and LED1 Current Reference
  • Receive Channel with High Dynamic Range:
    • 22-Bit Output in Twos Complement Format
    • Up to 105-dB Dynamic Range
    • Low Power: < 650 µA
    • Dynamic Power-Down Mode to Reduce Current to 300 µA
    • Adaptable to a Very Wide Range of Signal Amplitudes:
      • Total Programmable Gain: 10 kΩ to 4 MΩ
    • Integrated Digital Ambient Estimation and Subtraction
  • Flexible Clocking by External Clock or Crystal:
    • Pulse Frequency: 62.5 SPS to 2000 SPS
    • Flexible Pulse sequencing and Timing Control
    • Input Clock Range: 4 MHz (Min) to 60 MHz (Max)
  • Integrated Fault Diagnostics:
    • Photodiode and LED Open and Short Detection
  • Supplies:
    • Rx = 2.0 V to 3.6 V
    • Tx = 3.0 V to 5.25 V
  • Package: Compact DSBGA-36 (3.07 mm × 3.07 mm × 0.5 mm)
  • Specified Temperature Range: 0°C–20°C to 70°C

The AFE4403 is a fully-integrated analog front-end (AFE) ideally suited for pulse oximeter applications. The device consists of a low-noise receiver channel with an integrated analog-to-digital converter (ADC), an LED transmit section, and diagnostics for sensor and LED fault detection. The device is a very configurable timing controller. This flexibility enables the user to have complete control of the device timing characteristics. To ease clocking requirements and provide a low-jitter clock to the AFE4403, an oscillator is also integrated that functions from an external crystal. The device communicates to an external microcontroller or host processor using an SPI™ interface.

The device is a complete AFE solution packaged in a single, compact DSBGA-36 (3.07 mm × 3.07 mm × 0.5 mm) and is specified over the operating temperature range of –20°C to 70°C.

The AFE4403 is a fully-integrated analog front-end (AFE) ideally suited for pulse oximeter applications. The device consists of a low-noise receiver channel with an integrated analog-to-digital converter (ADC), an LED transmit section, and diagnostics for sensor and LED fault detection. The device is a very configurable timing controller. This flexibility enables the user to have complete control of the device timing characteristics. To ease clocking requirements and provide a low-jitter clock to the AFE4403, an oscillator is also integrated that functions from an external crystal. The device communicates to an external microcontroller or host processor using an SPI™ interface.

The device is a complete AFE solution packaged in a single, compact DSBGA-36 (3.07 mm × 3.07 mm × 0.5 mm) and is specified over the operating temperature range of –20°C to 70°C.
filter Find other Biosensing AFEs
Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 7
Type Title Date
* Data sheet AFE4403 Ultra-Small, Integrated Analog Front-End for Heart Rate Monitors and Low-Cost Pulse Oximeters datasheet (Rev. C) PDF | HTML 18 Nov 2020
White paper Fortschrittliche Halbleitertechnologie für moderne Telemedizin-Anwendungen 28 Oct 2020
White paper 持續進化的現代遠距照護應用半導 體技術 28 Oct 2020
White paper Evolving Semiconductor Technologies for Modern Telehealth Applications 26 Oct 2020
Technical article Designing compact, efficient and high performing multiparameter patient monitors PDF | HTML 25 Jun 2019
Application note How to Design an SpO2 and OHRM System Using AFE4403 02 Mar 2015
EVM User's guide AFE4403EVM User's Guide (Rev. B) 21 Jul 2014

Design & development

Please view the Design & development section on a desktop.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos