Startseite Batteriemanagement-ICs Batterielader-ICs
Startseite
Batteriemanagement-ICs
Batterielader-ICs

BQ24745

NICHT FÜR NEUE DESIGNS EMPFOHLEN

SMBus bis zu 4-Zellen-Stufe-2-Abwärts-Batterielader zur Unterstützung mehrerer Batteriechemikalien

Jetzt bestellen
Datenblatt
BQ24745 wird nicht für neue Designs empfohlen
Dieses Produkt wird zwar noch für bestehende Designs hergestellt, wir raten jedoch von seiner Verwendung für neue Designs ab. Bitte ziehen Sie eine dieser Alternativen in Erwägung:
open-in-new Alternativen vergleichen
Ähnliche Funktionalität wie verglichener Baustein
BQ24725A AKTIV SMBus-Laderegler für Lithium-Ionen-Akkus, 1-4 Zellen, mit N-Kanal-Leistungs-MOSFET-Selektor This product is 1-4S Li+ Battery SBMus charger controller

BQ24745

NICHT FÜR NEUE DESIGNS EMPFOHLEN
Datenblatt Jetzt bestellen

Produktdetails

Number of series cells 2, 3, 4 Charge current (max) (A) 10 Vin (max) (V) 24 Cell chemistry Li-Ion/Li-Polymer Battery charge voltage (min) (V) 0 Battery charge voltage (max) (V) 24 Absolute max Vin (max) (V) 30 Control topology Switch-Mode Buck Control interface SMBus Features Power Path Vin (min) (V) 7 Rating Catalog Operating temperature range (°C) 0 to 0
Number of series cells 2, 3, 4 Charge current (max) (A) 10 Vin (max) (V) 24 Cell chemistry Li-Ion/Li-Polymer Battery charge voltage (min) (V) 0 Battery charge voltage (max) (V) 24 Absolute max Vin (max) (V) 30 Control topology Switch-Mode Buck Control interface SMBus Features Power Path Vin (min) (V) 7 Rating Catalog Operating temperature range (°C) 0 to 0
VQFN (RHD) 28 25 mm² 5 x 5
  • NMOS-NMOS Synchronous Buck Converter with
    300-kHz Frequency and >95% Efficiency
  • 30-ns Minimum Driver Dead-Time and
    99.5% Maximum Effective Duty Cycle
  • High-Accuracy Voltage and Current Regulation
    • ±0.5% Charge Voltage Accuracy
    • ±3% Charge Current Accuracy
    • ±3% Adapter Current Accuracy
    • ±2% Input Current Sense Amp Accuracy
  • Integration
    • Input Current Comparator, With Adjustable
      Threshold and Hysteresis
    • Internal Soft-Start
  • Safety
    • Dynamic Power Management (DPM)
  • Up to 19.2-V Battery Voltage
  • 7-V–24-V AC/DC-Adapter Operating Range
  • Simplified SMBus Control Interface
    • Charge Voltage DAC (1.024 V–19.2 V)
    • Charge Current DAC (128 mA–8.064 A)
    • Adapter Current Limit DPM DAC
      (256 mA–11.008 A)
  • Status and Monitoring Outputs
    • AC/DC Adapter Present With
      Adjustable Voltage Threshold
    • Input Current Comparator With Adjustable
      Threshold and Hysteresis
    • Current Sense Amplifier for Current Drawn
      From Input Source
  • Charge Any Battery Chemistry: Li+, NiCd,
    NiMH, Lead Acid, Etc.
  • Charge Enable Pin
  • < 10-µA Battery Current With Adapter Removed
  • < 1-mA Input DCIN Current With Adapter
    Present and Charge Disabled
  • 28-Pin, 5-mm × 5-mm QFN Package
  • NMOS-NMOS Synchronous Buck Converter with
    300-kHz Frequency and >95% Efficiency
  • 30-ns Minimum Driver Dead-Time and
    99.5% Maximum Effective Duty Cycle
  • High-Accuracy Voltage and Current Regulation
    • ±0.5% Charge Voltage Accuracy
    • ±3% Charge Current Accuracy
    • ±3% Adapter Current Accuracy
    • ±2% Input Current Sense Amp Accuracy
  • Integration
    • Input Current Comparator, With Adjustable
      Threshold and Hysteresis
    • Internal Soft-Start
  • Safety
    • Dynamic Power Management (DPM)
  • Up to 19.2-V Battery Voltage
  • 7-V–24-V AC/DC-Adapter Operating Range
  • Simplified SMBus Control Interface
    • Charge Voltage DAC (1.024 V–19.2 V)
    • Charge Current DAC (128 mA–8.064 A)
    • Adapter Current Limit DPM DAC
      (256 mA–11.008 A)
  • Status and Monitoring Outputs
    • AC/DC Adapter Present With
      Adjustable Voltage Threshold
    • Input Current Comparator With Adjustable
      Threshold and Hysteresis
    • Current Sense Amplifier for Current Drawn
      From Input Source
  • Charge Any Battery Chemistry: Li+, NiCd,
    NiMH, Lead Acid, Etc.
  • Charge Enable Pin
  • < 10-µA Battery Current With Adapter Removed
  • < 1-mA Input DCIN Current With Adapter
    Present and Charge Disabled
  • 28-Pin, 5-mm × 5-mm QFN Package

The bq24745 is a high-efficiency, synchronous battery charger with an integrated input-current comparator, offering low component count for space-constrained, multi-chemistry battery-charging applications. The input-current, charge-current, and charge-voltage DACs allow very high regulation accuracies that can be easily programmed by the system power-management microcontroller using the SMBus interface. The bq24745 charges two, three, or four series Li+ cells, and is available in a 28-pin, 5-mm × 5 mm QFN package.

The bq24745 features dynamic power management (DPM) and input power limiting. These features reduce battery-charge current when the input power limit is reached to avoid overloading the ac adaptor when supplying the load and the battery charger simultaneously. A highly accurate current-sense amplifier enables precise measurement of input current from the ac adapter, allowing monitoring the overall system power. If the adapter current is above the programmed low-power threshold, a signal is sent to host so that the system optimizes its performance to the power available from the adapter. An integrated comparator monitors the input current through the current-sense amplifier, and indicates when the input current exceeds a programmable threshold limit.

The bq24745 is a high-efficiency, synchronous battery charger with an integrated input-current comparator, offering low component count for space-constrained, multi-chemistry battery-charging applications. The input-current, charge-current, and charge-voltage DACs allow very high regulation accuracies that can be easily programmed by the system power-management microcontroller using the SMBus interface. The bq24745 charges two, three, or four series Li+ cells, and is available in a 28-pin, 5-mm × 5 mm QFN package.

The bq24745 features dynamic power management (DPM) and input power limiting. These features reduce battery-charge current when the input power limit is reached to avoid overloading the ac adaptor when supplying the load and the battery charger simultaneously. A highly accurate current-sense amplifier enables precise measurement of input current from the ac adapter, allowing monitoring the overall system power. If the adapter current is above the programmed low-power threshold, a signal is sent to host so that the system optimizes its performance to the power available from the adapter. An integrated comparator monitors the input current through the current-sense amplifier, and indicates when the input current exceeds a programmable threshold limit.
open-in-new Andere Batterielader-ICs suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 4
Typ Titel Datum
* Data sheet SMBus-Controlled Multi-chemistry Battery Charger With Input Current datasheet (Rev. D) 05 Okt 2011
Application note How to Review a Multicell Switching Charger Schematic 21 Sep 2011
More literature Журнал по применению аналоговых компонентов 1 кв. 2010 23 Sep 2010
Analog Design Journal Li-ion battery-charger solutions for JEITA compliance 29 Jan 2010

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Treiber oder Bibliothek

SLUC098 — bq24745 Driver (USB EV2300) Installer

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Batterielader-ICs
BQ24745 — SMBus bis zu 4-Zellen-Stufe-2-Abwärts-Batterielader zur Unterstützung mehrerer Batteriechemikalien
Herunterladen
Support-Software

SLUC097 — bq24745EVSWv101

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Batterielader-ICs
BQ24745 — SMBus bis zu 4-Zellen-Stufe-2-Abwärts-Batterielader zur Unterstützung mehrerer Batteriechemikalien
Herunterladen
Referenzdesigns

PMP9668 — Universelles uP-gesteuertes Batterieladegerät 24 Vin, 10 Aout max., 5/12 V/2 A und 5 V/4 A, 2 USB-An

BQ24745 is a host controlled synchronous buck battery charger capable of charging batteries at up to 19.2V and up to 8 A normally, extended to 10 A with use of 8 mOhm battery sense resistor. The power train is capable of 8 A with convection only cooling and 10 A with moderate fan cooling (~200 (...)
Test report: PDF
Schaltplan: PDF
Gehäuse Pins Herunterladen
VQFN (RHD) 28 Optionen anzeigen
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos