The LM10-MIL is a monolithic linear IC consisting of a precision reference, an adjustable reference buffer, and an independent, high-quality operational amplifier.
The unit can operate from a total supply voltage as low as 1.1 V or as high as 40 V, drawing only 270 µA. A complementary output stage swings within 15 mV of the supply terminals or will deliver ±20-mA output current with ±0.4-V saturation. Reference output can be as low as 200 mV.
The circuit is recommended for portable equipment and is completely specified for operation from a single power cell. In contrast, high output-drive capability, both voltage and current, along with thermal overload protection, suggest it in demanding general-purpose applications.
The device is capable of operating in a floating mode, independent of fixed supplies. It can function as a remote comparator, signal conditioner, SCR controller or transmitter for analog signals, delivering the processed signal on the same line used to supply power. It is also suited for operation in a wide range of voltage and current regulator applications, from low voltages to several hundred volts, providing greater precision than existing ICs.
This series is available in the three standard temperature ranges, with the commercial part having relaxed limits. In addition, a low-voltage specification (suffix L) is available in the limited temperature ranges at a cost savings.
| Typ | Titel | Datum | ||
|---|---|---|---|---|
| * | Data sheet | LM10-MIL Operational Amplifier and Voltage Reference datasheet | PDF | HTML | 20 Jun 2017 |
| E-book | The Signal e-book: A compendium of blog posts on op amp design topics | 28 Mär 2017 | ||
| Application note | AN-211 New Op Amp Ideas (Rev. A) | 06 Mai 2013 | ||
| Application note | AN-288 System-Oriented DC-DC Conversion Techniques (Rev. B) | 06 Mai 2013 | ||
| Application note | AN-298 Isolation Techniques for Signal Conditioning (Rev. B) | 06 Mai 2013 | ||
| Application note | AN-300 Simple Circuit Detects Loss of 4-20 mA Signal (Rev. B) | 23 Apr 2013 | ||
| Application note | Effect of Heavy Loads on Accuracy and Linearity of Op Amp Circuits (Rev. B) | 22 Apr 2013 | ||
| Application note | Using ADC0808/809 8-Bit uP Compble ADCs w/8-Chan Analog Multiplexr (Rev. B) | 22 Apr 2013 | ||
| Application note | Applying a New Precision Op Amp | 04 Okt 2004 | ||
| Application note | Audio Applications of Linear Integrated Circuits | 02 Mai 2004 | ||
| White paper | NSC Develops New Complementary Bipolar Process For High Speed, High Perf Analog | 01 Aug 2001 |
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
| Gehäuse | Pins | Herunterladen |
|---|---|---|
| TO-CAN (LMG) | 8 | Optionen anzeigen |
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.