Produktdetails

Number of ADC channels 2 Number of DAC channels 2 Digital audio interface I2S Analog inputs 2 Analog outputs 2 Sampling rate (max) (kHz) 96 Rating Catalog ADC SNR (typ) (dB) 101 DAC SNR (typ) (dB) 105 Operating temperature range (°C) -40 to 85
Number of ADC channels 2 Number of DAC channels 2 Digital audio interface I2S Analog inputs 2 Analog outputs 2 Sampling rate (max) (kHz) 96 Rating Catalog ADC SNR (typ) (dB) 101 DAC SNR (typ) (dB) 105 Operating temperature range (°C) -40 to 85
VQFNP (RTF) 32 32.24 mm² 6.2 x 5.2
  • Microphone Amplifier and Bias
    • Monaural Microphone Amplifier: 34-dB Gain at Differential Input
    • Microphone Bias: 1 mA at 3.75 V
  • Multiplexer and PGA
    • Multiplex of Stereo Single-Ended Line Inputs and Monaural Microphone Amplifier
    • 0.1 Vrms to 1.5 Vrms Full-Scale Input Range
    • 22-k Input Resistance at 0.1-Vrms Input
    • 20 dB to -4 dB/range, 1 dB/step PGA
  • Reference Output: ±10 mA at 2.5 V
  • 24-Bit Delta-Sigma ADC and DAC
  • Stereo ADC:
    • Full-Scale Input: 3 Vp-p
    • Antialiasing Filter Included
    • 1/64 Decimation Filter:
        Pass-Band Ripple: ±0.05 dB
        Stop-Band Attenuation: -65 dB
    • On-Chip High-Pass Filter: 0.91 Hz at fS = 48 kHz
    • High Performance:
        THD+N: -94 dB (Typical)
        SNR: 101 dB (Typical)
        Dynamic Range: 101 dB (Typical)
  • Stereo DAC:
    • Single-Ended Voltage Output: 4 Vp-p
    • Analog Low-Pass Filter Included
    • ×8 Oversampling Digital Filter:
        Pass-Band Ripple: ±0.03 dB
        Stop-Band Attenuation: -50 dB
    • High Performance:
        THD+N: -97 dB (Typical)
        SNR: 105 dB (Typical
        Dynamic Range: 104 dB (Typical)
  • S/PDIF Output for DAC Digital Input
  • Multiple Functions With I2C Interface:
    • Digital De-Emphasis: 32-, 44.1-, 48-kHz
    • Zipper-Noise-Free Digital Attenuation and Soft Mute for DAC
    • HPF Bypass Control for ADC
    • S/PDIF Output Control
    • Power Down: ADC/DAC Independently
  • External Power-Down Pin:
    • ADC/DAC Simultaneously
  • Audio Data Format: 24-Bit I2S Only
  • Sampling Rate:
    • 16-96 kHz for Both ADC and DAC
  • System Clock: 256 fS Only
  • Dual Power Supplies:
    • 5 V for Analog and 3.3 V for Digital
  • Package: VQFN-32

System Two, Audio Precision are trademarks of Audio Precision, Inc.
All trademarks are the property of their respective owners.

  • Microphone Amplifier and Bias
    • Monaural Microphone Amplifier: 34-dB Gain at Differential Input
    • Microphone Bias: 1 mA at 3.75 V
  • Multiplexer and PGA
    • Multiplex of Stereo Single-Ended Line Inputs and Monaural Microphone Amplifier
    • 0.1 Vrms to 1.5 Vrms Full-Scale Input Range
    • 22-k Input Resistance at 0.1-Vrms Input
    • 20 dB to -4 dB/range, 1 dB/step PGA
  • Reference Output: ±10 mA at 2.5 V
  • 24-Bit Delta-Sigma ADC and DAC
  • Stereo ADC:
    • Full-Scale Input: 3 Vp-p
    • Antialiasing Filter Included
    • 1/64 Decimation Filter:
        Pass-Band Ripple: ±0.05 dB
        Stop-Band Attenuation: -65 dB
    • On-Chip High-Pass Filter: 0.91 Hz at fS = 48 kHz
    • High Performance:
        THD+N: -94 dB (Typical)
        SNR: 101 dB (Typical)
        Dynamic Range: 101 dB (Typical)
  • Stereo DAC:
    • Single-Ended Voltage Output: 4 Vp-p
    • Analog Low-Pass Filter Included
    • ×8 Oversampling Digital Filter:
        Pass-Band Ripple: ±0.03 dB
        Stop-Band Attenuation: -50 dB
    • High Performance:
        THD+N: -97 dB (Typical)
        SNR: 105 dB (Typical
        Dynamic Range: 104 dB (Typical)
  • S/PDIF Output for DAC Digital Input
  • Multiple Functions With I2C Interface:
    • Digital De-Emphasis: 32-, 44.1-, 48-kHz
    • Zipper-Noise-Free Digital Attenuation and Soft Mute for DAC
    • HPF Bypass Control for ADC
    • S/PDIF Output Control
    • Power Down: ADC/DAC Independently
  • External Power-Down Pin:
    • ADC/DAC Simultaneously
  • Audio Data Format: 24-Bit I2S Only
  • Sampling Rate:
    • 16-96 kHz for Both ADC and DAC
  • System Clock: 256 fS Only
  • Dual Power Supplies:
    • 5 V for Analog and 3.3 V for Digital
  • Package: VQFN-32

System Two, Audio Precision are trademarks of Audio Precision, Inc.
All trademarks are the property of their respective owners.

The PCM3052A is a low-cost, single-chip, 24-bit stereo audio codec (ADC and DAC) with single-ended analog voltage input and output. It also has an analog front end consisting of a 34-dB microphone amplifier, microphone bias generator, 2 stereo multiplexers, and a wide-range PGA. Analog- to-digital converters (ADCs) employ delta-sigma modulation with 64-times oversampling. On the other hand, digital-to-analog converters (DACs) employ modulation with 64- and 128-times oversampling. ADCs include a digital decimation filter with a high-pass filter, and DACs include an 8-times oversampling digital interpolation filter. The PCM3052A has many functions which are controlled using the I2C interface: DAC digital de-emphasis, digital attenuation, soft mute etc. The PCM3052A also has an S/PDIF output pin for the DAC digital input. The power-down mode, which works on ADCs and DACs simultaneously, is provided by an external pin. The PCM3052A is suitable for a wide variety of cost-sensitive PC audio (recorder and player) applications where good performance is required. The PCM3052A is fabricated using a highly advanced CMOS process and is available in a small 32-pin VQFN package.

The PCM3052A is a low-cost, single-chip, 24-bit stereo audio codec (ADC and DAC) with single-ended analog voltage input and output. It also has an analog front end consisting of a 34-dB microphone amplifier, microphone bias generator, 2 stereo multiplexers, and a wide-range PGA. Analog- to-digital converters (ADCs) employ delta-sigma modulation with 64-times oversampling. On the other hand, digital-to-analog converters (DACs) employ modulation with 64- and 128-times oversampling. ADCs include a digital decimation filter with a high-pass filter, and DACs include an 8-times oversampling digital interpolation filter. The PCM3052A has many functions which are controlled using the I2C interface: DAC digital de-emphasis, digital attenuation, soft mute etc. The PCM3052A also has an S/PDIF output pin for the DAC digital input. The power-down mode, which works on ADCs and DACs simultaneously, is provided by an external pin. The PCM3052A is suitable for a wide variety of cost-sensitive PC audio (recorder and player) applications where good performance is required. The PCM3052A is fabricated using a highly advanced CMOS process and is available in a small 32-pin VQFN package.

Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

Ähnliche Funktionalität wie verglichener Baustein
PCM3070 AKTIV Stereo-Audiocodec mit integriertem miniDSP miniDSP, headphone driver, higher sampling rate, SPI & I2C controlled

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 2
Typ Titel Datum
* Data sheet 24-Bit 96-kHz Stereo Audio CODEC w/Microphone Amp, Bias, Multiplexer & PGA datasheet 10 Nov 2005
User guide DEM-DAI3052A User's Guide 01 Sep 2006

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

GUI für Evaluierungsmodul (EVM)

SLAC223 PCM3052AEVM - Graphical User Interface (GUI) Software

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Audio-CODECs
PCM3052A Stereo-Audio-Codec, 24 Bit, mit Mikrofonverstärker, Bias, MUX und PGA
Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
Gehäuse Pins Herunterladen
VQFNP (RTF) 32 Optionen anzeigen

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos