TMP461-SP
Nachgewiesene Strahlungshärte(RHA), hochgenauer Remote- und lokaler Temperatursensor
TMP461-SP
- QMLV Qualified: 5962R-1721801VXC
- Thermally Enhanced HKU Package
- Radiation-Hardness-Assured (RHA) up to Total Ionizing Dose (TID) 100 krad(Si) at low dose rate (LDR) of 10 mrad/s
- Single Event Latchup (SEL) Immune to 76 MeV·cm2/mg at 125°C
- 10-Lead HKU Ceramic Package
- Remote Diode Temperature Sensor Accuracy: ±1.5°C (Across Extended Temperature Range of [–55°C to 125°C])
- Local Temperature Sensor Accuracy: ±2°C (Across Extended Temperature Range of [–55°C to 125°C])
- Enables Measurement Of Remote Diode Temperatures in the Range of –64°C to 191°C
- Resolution for Local and Remote Channels: 0.0625°C
- Supply and Logic Voltage Range: 1.7 V to 3.6 V
- 35-µA Operating Current (1 SPS),
3-µA Shutdown Current - Series Resistance Cancellation
- η-Factor and Offset Correction
- Programmable Digital Filter
- Diode Fault Detection
- Two-Wire and SMBus™ Serial Interface Compatible with Pin-Programmable Address
The TMP461-SP device is a radiation-hardened, high-accuracy, low-power remote temperature sensor monitor with a built-in local temperature sensor. The remote temperature sensors are typically low-cost discrete NPN or PNP transistors, or substrate thermal transistors or diodes that are integral parts of microprocessors, analog-to-digital converters (ADC), digital-to-analog converters (DAC), microcontrollers, or field-programmable gate arrays (FPGA). Temperature is represented as a 12-bit digital code for both local and remote sensors, giving a resolution of 0.0625°C. The two-wire serial interface accepts the SMBus communication protocol with up to nine different pin-programmable addresses.
Advanced features such as series resistance cancellation, programmable nonideality factor (η-factor), programmable offset, programmable temperature limits, and a programmable digital filter, are combined to provide a robust thermal monitoring solution with improved accuracy and noise immunity.
The TMP461-SP is ideal for multi-location, high-accuracy temperature measurements in a variety of distributed telemetry applications. The integrated local and remote temperature sensors simplify spacecraft housekeeping activities by providing an easy way of measuring temperature gradients. The device is specified for operation over a supply voltage range of 1.7 V to 3.6 V, and a temperature range of –55°C to 125°C.
Ähnliche Produkte, die für Sie interessant sein könnten
Gleiche Funktionalität, andere Pinbelegung als verglichener Baustein
Technische Dokumentation
Design und Entwicklung
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
TMP461EVM-CVAL — Strahlungshärte-gesicherter (RHA) hochpräziser Remote- und lokaler Temperatursensor – Evaluierungsmo
The TMP461-SP device is a high-accuracy, low-power remote temperature sensor monitor with a built-in local temperature sensor. The remote temperature sensors are typically low-cost discrete NPN or PNP transistors, or substrate thermal transistors or diodes that are integral parts of (...)
TSW12D1620EVM-CVAL — ADC12D1620QML-SP Evaluierungsmodul für Breitband-Empfänger in Raumfahrtqualität
Das TSW12D1620EVM-CVAL ist ein 1,5-GHz-Breitband-Empfänger-Evaluierungsmodul (EVM), das Keramikmodelle des Verstärkers, Analog-zu-Digital-Wandlers (ADC), Taktung, Temperatursensor, Mikrocontroller, und Stromversorgungslösung umfasst. Die Platine eignet sich am besten für die Digitalisierung VON (...)
ALPHA-XILINX-KU060-SPACE — Alpha Data®-Platine für Xilinx® Kintex® UltraScale™ XQRKU060-FPGA mit TI-Stromversorgungslösung
TIDA-010191 — Referenzdesign für weltraumtaugliche Mehrkanal-Taktung mit JESD204B 15 GHz
TIDA-010197 — Vielseitiges Referenzdesign für Satellitenüberwachung und -steuerung mit < 1 % Genauigkeitsabweichun
TIDA-070004 — Raumfahrttaugliches Referenzdesign mit integriertem Temperatursensor mit digitalem Ausgang
Gehäuse | Pins | Herunterladen |
---|---|---|
CFP (HKU) | 10 | Optionen anzeigen |
Bestellen & Qualität
- RoHS
- REACH
- Bausteinkennzeichnung
- Blei-Finish/Ball-Material
- MSL-Rating / Spitzenrückfluss
- MTBF-/FIT-Schätzungen
- Materialinhalt
- Qualifikationszusammenfassung
- Kontinuierliches Zuverlässigkeitsmonitoring
- Werksstandort
- Montagestandort
Support und Schulungen
TI E2E™-Foren mit technischem Support von TI-Ingenieuren
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.