Startseite Motortreiber Treiber für optische Laufwerke
Startseite
Motortreiber
Treiber für optische Laufwerke

TPIC2040

AKTIV

Serieller Schnittstellentreiber für 7-Kanal-Motoren für optisches Laufwerk

Jetzt bestellen
Datenblatt

TPIC2040

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Applications CD, DVD Motor driver channels 7 Integrated supply 1 DC/DC converter Operating supply (V) 5 Driver supply voltage (V) 5 Operating temperature range (°C) -20 to 75 Rating Catalog
Applications CD, DVD Motor driver channels 7 Integrated supply 1 DC/DC converter Operating supply (V) 5 Driver supply voltage (V) 5 Operating temperature range (°C) -20 to 75 Rating Catalog
TSSOP (DBT) 38 62.08 mm² 9.7 x 6.4
  • Serial Peripheral Interface (SPI)
    • Maximum Read/Write 35 MHz
    • 3.3-V Digital I/O
  • Actuator and Motor Driver
    • PWM Control With H-Bridge Output
    • Focus / Tracking / Tilt Actuator Driver With 12-Bit DAC Control
    • Sled Motor Drivers With Current Mode, 10-Bit DAC Control
    • Load Driver With 12-Bit DAC Control
    • Capable End Position Sensing for Sled Without Position Sensor
  • Spindle Motor Driver
    • Integrated Spindle Current Sense Resistor
    • Selectable Current Sense Resistor Value 0.27 to 0.20 Ω by Register Setting; Thereby, SPM Current can be Restricted from 725 to 980 mA
    • Sensor-Less: Rotor Position Sense by Motor BEMF
    • 12-Bit Spindle DAC Programmed Through Serial Port
    • Self-Contained Inductive Position Sense and Startup
    • Quick Stop by Automatic Controlled Brake Named Auto Short Brake (Short and Active Brake)
    • 0.7-A Maximum Continuous Current Excluding Thermal Issues
    • LS Mode: Restricted to 25% of Normal Speed
  • Utility Functions
    • XRESET Signal With Digital Delay (POR) 20 ms
    • Status Latch: Act Timer, SIF Error, PWR Monitor, Thermal Protection, and OCP Error
  • Switch
    • CSW: Software Control Current Output Port
  • LDO Pre-Driver
    • 1-Channel LDO Pre-Driver for 3.3-V or 1.2-V Output With External Transistor
  • Protection
    • Individual Thermal Protect Circuit on CSW, SPM, and Act Channel
    • Two Alert Levels: and in Thermal Protection
    • Overcurrent Protection Circuit in Load Driver
    • Selectable OCP Threshold Level in CSW Output
    • Hardware Device Disable Pin XMUTE
    • Power Monitor by Undervoltage Lockout (UVLO) and Overvoltage Protection (OVP)
  • Serial Peripheral Interface (SPI)
    • Maximum Read/Write 35 MHz
    • 3.3-V Digital I/O
  • Actuator and Motor Driver
    • PWM Control With H-Bridge Output
    • Focus / Tracking / Tilt Actuator Driver With 12-Bit DAC Control
    • Sled Motor Drivers With Current Mode, 10-Bit DAC Control
    • Load Driver With 12-Bit DAC Control
    • Capable End Position Sensing for Sled Without Position Sensor
  • Spindle Motor Driver
    • Integrated Spindle Current Sense Resistor
    • Selectable Current Sense Resistor Value 0.27 to 0.20 Ω by Register Setting; Thereby, SPM Current can be Restricted from 725 to 980 mA
    • Sensor-Less: Rotor Position Sense by Motor BEMF
    • 12-Bit Spindle DAC Programmed Through Serial Port
    • Self-Contained Inductive Position Sense and Startup
    • Quick Stop by Automatic Controlled Brake Named Auto Short Brake (Short and Active Brake)
    • 0.7-A Maximum Continuous Current Excluding Thermal Issues
    • LS Mode: Restricted to 25% of Normal Speed
  • Utility Functions
    • XRESET Signal With Digital Delay (POR) 20 ms
    • Status Latch: Act Timer, SIF Error, PWR Monitor, Thermal Protection, and OCP Error
  • Switch
    • CSW: Software Control Current Output Port
  • LDO Pre-Driver
    • 1-Channel LDO Pre-Driver for 3.3-V or 1.2-V Output With External Transistor
  • Protection
    • Individual Thermal Protect Circuit on CSW, SPM, and Act Channel
    • Two Alert Levels: and in Thermal Protection
    • Overcurrent Protection Circuit in Load Driver
    • Selectable OCP Threshold Level in CSW Output
    • Hardware Device Disable Pin XMUTE
    • Power Monitor by Undervoltage Lockout (UVLO) and Overvoltage Protection (OVP)

TPIC2040 is a very-low noise type motor driver IC suitable for slim or ultra-slim DVD reader/writer. This IC includes integrated current sense resistance that measures SPM current and reduces drive system cost. The 7-channel driver IC controlled by serial I/F is optimum for driving a spindle motor, a sled motor, a load motor, and Focus / Tracking / Tilt actuators. The spindle motor driver uses BEMF detection for sensorless startup and control of the spindle motor

As the output stage of all channels works in efficient PWM driving, it is possible to attain low-power operation by PWM control. Deadband less control is possible for a focus / tracking / tilt actuator driver. In addition, the spindle part output current limiting circuit, thermal shutdown circuit, sled-end detection circuit, actuator protection and power-reset circuit are built in.

TPIC2040 is a very-low noise type motor driver IC suitable for slim or ultra-slim DVD reader/writer. This IC includes integrated current sense resistance that measures SPM current and reduces drive system cost. The 7-channel driver IC controlled by serial I/F is optimum for driving a spindle motor, a sled motor, a load motor, and Focus / Tracking / Tilt actuators. The spindle motor driver uses BEMF detection for sensorless startup and control of the spindle motor

As the output stage of all channels works in efficient PWM driving, it is possible to attain low-power operation by PWM control. Deadband less control is possible for a focus / tracking / tilt actuator driver. In addition, the spindle part output current limiting circuit, thermal shutdown circuit, sled-end detection circuit, actuator protection and power-reset circuit are built in.

open-in-new Andere Treiber für optische Laufwerke suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Typ Titel Datum
* Data sheet TPIC2040 Serial I/F Controlled 7-Channel Motor-Driver for ODD Drive datasheet PDF | HTML 16 Dez 2015

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Gehäuse Pins Herunterladen
TSSOP (DBT) 38 Optionen anzeigen
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos