The TPA3112D1 is a 25-W efficient, Class-D audio power amplifier for driving a bridge tied speaker. Advanced EMI Suppression Technology enables the use of inexpensive ferrite bead filters at the outputs while meeting EMC requirements. SpeakerGuard speaker protection system includes an adjustable power limiter and a DC detection circuit. The adjustable power limiter allows the user to set a voltage rail lower than the chip supply to limit the amount of current through the speaker. The DC detect circuit measures the frequency and amplitude of the PWM signal and shuts off the output stage if the input capacitors are damaged or shorts exist on the inputs.
The TPA3112D1 can drive a mono speaker as low as 4Ω. The high efficiency of the TPA3112D1, > 90%, eliminates the need for an external heat sink when playing music.
The outputs are fully protected against shorts to GND, VCC, and output-to-output. The short-circuit protection and thermal protection includes an auto-recovery feature.
| Tipo | Título | Fecha | ||
|---|---|---|---|---|
| * | Data sheet | TPA3112D1 25-W Filter-Free Mono Class-D Audio Power Amplifier With SpeakerGuard™ datasheet (Rev. D) | PDF | HTML | 07 dic 2016 |
| Application note | Using Thermal Calculation Tools for Analog Components (Rev. A) | 30 ago 2019 | ||
| Application note | Guidelines for Measuring Audio Power Amplifier Performance (Rev. A) | 26 ago 2019 | ||
| Application note | AN-1849 An Audio Amplifier Power Supply Design (Rev. C) | 27 jun 2019 | ||
| Application note | AN-1737 Managing EMI in Class D Audio Applications (Rev. A) | 01 may 2013 | ||
| EVM User's guide | TPA3112D1 Audio Amplifier Evaluation Module User's Guide (Rev. A) | 08 jul 2010 |
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
The TPA3112D1 evaluation module consists of a single 25-W, Class-D, mono audio power amplifier complete with a small number of external components mounted on a circuit board that can be used to directly drive a speaker with an external analog audio source as the input. The EVM’s default output (...)
| Paquete | Pasadores | Descargar |
|---|---|---|
| HTSSOP (PWP) | 28 | Ver opciones |
Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.