Inicio Gestión de la energía AC/DC & DC/DC converters (integrated FET)

TPS54424

ACTIVO

Convertidor reductor síncrono SWIFT™ de 4 A, entrada de 4.5 V a 17 V, modo de corriente

Detalles del producto

Iout (max) (A) 4 Vin (min) (V) 4.5 Vin (max) (V) 17 Topology Buck Type Converter Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 1600 Features Enable, Frequency synchronization, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Synchronous Rectification, Tracking Control mode current mode Vout (min) (V) 0.6 Vout (max) (V) 12 Rating Catalog Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.00058
Iout (max) (A) 4 Vin (min) (V) 4.5 Vin (max) (V) 17 Topology Buck Type Converter Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 1600 Features Enable, Frequency synchronization, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Synchronous Rectification, Tracking Control mode current mode Vout (min) (V) 0.6 Vout (max) (V) 12 Rating Catalog Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.00058
VQFN-HR (RNV) 18 12.25 mm² 3.5 x 3.5
  • Small 3.5-mm × 3.5-mm HotRod™ QFN Package
  • Integrated 14.1-mΩ and 6.1-mΩ MOSFETs
  • Peak Current Mode Control With Fast Transient Response
  • 200-kHz to 1.6-MHz Fixed Switching Frequency
  • Synchronizes to External Clock
  • 0.6-V Voltage Reference ±0.85% Over Temperature
  • 0.6-V to 12-V Output Voltage Range
  • Hiccup Current Limit
  • Safe Start-Up into Pre-Biased Output Voltage
  • Adjustable Soft Start and Power Sequencing
  • Adjustable Input Undervoltage Lockout
  • 3-µA Shutdown Current
  • Power Good Output Monitor for Undervoltage and Overvoltage
  • Output Overvoltage Protection
  • Non-latch Thermal Shutdown Protection
  • –40°C to 150°C Operating Junction Temperature
  • Create a Custom Design Using the TPS54424 With the WEBENCH® Power Designer
  • Small 3.5-mm × 3.5-mm HotRod™ QFN Package
  • Integrated 14.1-mΩ and 6.1-mΩ MOSFETs
  • Peak Current Mode Control With Fast Transient Response
  • 200-kHz to 1.6-MHz Fixed Switching Frequency
  • Synchronizes to External Clock
  • 0.6-V Voltage Reference ±0.85% Over Temperature
  • 0.6-V to 12-V Output Voltage Range
  • Hiccup Current Limit
  • Safe Start-Up into Pre-Biased Output Voltage
  • Adjustable Soft Start and Power Sequencing
  • Adjustable Input Undervoltage Lockout
  • 3-µA Shutdown Current
  • Power Good Output Monitor for Undervoltage and Overvoltage
  • Output Overvoltage Protection
  • Non-latch Thermal Shutdown Protection
  • –40°C to 150°C Operating Junction Temperature
  • Create a Custom Design Using the TPS54424 With the WEBENCH® Power Designer

The TPS54424 is a full-featured 17-V (19-V maximum), 4-A synchronous step-down DC/DC converter in a 3.5 mm × 3.5 mm HotRod™ QFN package.

The device is optimized for small solution size through high efficiency and integrating the high-side and low-side MOSFETs. Further space savings are achieved through peak current mode control, which reduces component count, and by selecting a high switching frequency, reducing the inductor footprint.

The peak current mode control simplifies the loop compensation and provides fast transient response. Cycle-by-cycle peak current limiting on the high-side and low-side sourcing current limit protects the device in overload situations. Hiccup limits MOSFET power dissipation if a short circuit or over loading fault persists.

A power good supervisor circuit monitors the regulator output. The PGOOD pin is an open-drain output and goes high impedance when the output voltage is in regulation. An internal deglitch time prevents the PGOOD pin from pulling low unless a fault has occurred.

A dedicated EN pin can be used to control the regulator on/off and adjust the input undervoltage lockout. The output voltage start-up ramp is controlled by the SS/TRK pin, which allows operation as either a standalone power supply or in tracking situations.

The TPS54424 is a full-featured 17-V (19-V maximum), 4-A synchronous step-down DC/DC converter in a 3.5 mm × 3.5 mm HotRod™ QFN package.

The device is optimized for small solution size through high efficiency and integrating the high-side and low-side MOSFETs. Further space savings are achieved through peak current mode control, which reduces component count, and by selecting a high switching frequency, reducing the inductor footprint.

The peak current mode control simplifies the loop compensation and provides fast transient response. Cycle-by-cycle peak current limiting on the high-side and low-side sourcing current limit protects the device in overload situations. Hiccup limits MOSFET power dissipation if a short circuit or over loading fault persists.

A power good supervisor circuit monitors the regulator output. The PGOOD pin is an open-drain output and goes high impedance when the output voltage is in regulation. An internal deglitch time prevents the PGOOD pin from pulling low unless a fault has occurred.

A dedicated EN pin can be used to control the regulator on/off and adjust the input undervoltage lockout. The output voltage start-up ramp is controlled by the SS/TRK pin, which allows operation as either a standalone power supply or in tracking situations.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Reemplazo con funcionalidad mejorada del dispositivo comparado
TPS54824 ACTIVO Convertidor reductor SWIFT™ síncrono de 4.5 V a 17 V y 8 A en QFN HotRod™ Pin-to-pin version with 8-A output current.
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
TPS543320 ACTIVO Convertidor reductor síncrono SWIFT™ de 3 A con entrada de 4 V a 18 V Higher efficiency in a smaller solution size

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 18
Tipo Título Fecha
* Data sheet TPS54424 4.5-V to 17-V (19-V Maximum) Input, 4-A Synchronous SWIFT™ Step-Down Converter datasheet PDF | HTML 23 ene 2018
User guide TPS54424 SWIFT™ Step-Down Converter Evaluation Module User's Guide (Rev. A) PDF | HTML 02 sep 2021
Application note Step-Dwn (Buck) Convrtr Pwer Solutions for Programmable Logic Controller Systems (Rev. A) PDF | HTML 26 jul 2021
Application note DC/DC Converter Solutions for Hardware Accelerators in Data Center Applications (Rev. A) PDF | HTML 04 may 2021
Application note Non-Isolated Point-of-Load Solutions for Tiger Lake in PC Applications (Rev. B) PDF | HTML 29 abr 2021
Selection guide Buck Converter Quick Reference Guide (Rev. B) 08 abr 2021
Application note Point-of-Load Solutions for Data Center App Implementing VR13.HC Vccin Spec (Rev. A) PDF | HTML 08 ene 2020
Application note Understanding Flip Chip QFN (HotRod) and Standard QFN Performance Differences 02 jul 2019
Application note Minimizing Output Ripple During Startup (Rev. A) 20 may 2019
Application note DC/DC Point-of-load Power Solutions for Wired Networking Switch Systems 11 dic 2018
Application note Optimizing Layout of the TPS54824 HotRod™ Package for Thermal Performance 16 nov 2018
Application note Solve Point-of-Load Power Design Challenges: Single Board Computer Applications 24 ago 2018
Application note Create an Inverting Power Supply Using a Synchronous Step-Down Regulator (Rev. B) 25 jun 2018
White paper Measuring various types of low-frequency noise in DC/DC switching converters 01 feb 2018
Analog Design Journal Reducing noise on the output of a switching regulator 04 ene 2018
Application note Minimizing Output Ripple During Startup 22 jun 2017
Application note HotRod QFN Application Note 09 abr 2014
Application note Ultra Small 5A, Adjustable Output Reference design using TPS54620 21 may 2010

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

AFE7700EVM — Módulo de evaluación de transceptor RF AFE7700 de uso general de cuatro canales de 600 MHz a 6 GHz

The AFE7700 evaluation module (EVM) is a board used to evaluate the AFE7700 integrated RF transceiver. AFE7700 supports up to four-transmit, four-receive, and two feedback channels (4T4R2F) and integrates phase-locked loops (PLLs) and voltage-controlled oscillators (VCOs) for generation of (...)

Placa de evaluación

AFE7900EVM — Módulo de evaluación de AFE7900 para AFE de muestreo de RF de cuatro transmisiones, seis receptores,

El módulo de evaluación (EVM) AFE7900 es una plataforma transceptora de muestreo de RF que se puede configurar para ser compatible con hasta cuatro canales de transmisión, cuatro de recepción y dos de retroalimentación (4T4R + 2FB).

El módulo evalúa AFE7900, que es un circuito frontal analógico (...)

Placa de evaluación

AFE7950EVM — Módulo de evaluación de AFE7950 para AFE de muestreo de RF de cuatro transmisiones, seis receptores,

El módulo de evaluación (EVM) AFE7950 es una plataforma de transceptores de muestreo de RF que puede configurarse para admitir hasta cuatro canales de transmisión y seis de recepción (4T6R) simultáneamente. El módulo evalúa el AFE7950, que es un circuito frontal analógico (AFE) de muestreo de (...)

Guía del usuario: PDF | HTML
Placa de evaluación

TPS54424EVM-779 — Módulo de evaluación de convertidor SWIFT™ reductor síncrono de 4 A TPS54424

The TPS54424EVM-779 is an 4-A synchronous converter evaluation module (EVM).  The TPS54424 is a synchronous buck converter, integrating both power MOSFETs to minimize solution size and provide high efficiency at full load. Fixed-frequency peak current-mode control is used to minimize period (...)

Guía del usuario: PDF | HTML
Modelo de simulación

TPS54424 PSpice Transient Model

SLVMC62.ZIP (93 KB) - PSpice Model
Modelo de simulación

TPS54424 TINA-TI Average Reference Design

SLVMCN3.TSC (153 KB) - TINA-TI Reference Design
Modelo de simulación

TPS54424 TINA-TI Average Spice Model

SLVMCN4.ZIP (9 KB) - TINA-TI Spice Model
Diseños de referencia

TIDA-01510 — Diseño de referencia de diseño bifaz para aumentar la densidad energética con convertidores CC/CC

This reference design demonstrates the correct way to design a two-sided DC/DC layout in an effort to achieve higher power-supply density. The design guide highlights common mistakes and how to avoid them, along with test results showing that proper implemenation of the TPS54824 device in a (...)
Design guide: PDF
Esquema: PDF
Paquete Pasadores Descargar
VQFN-HR (RNV) 18 Ver opciones

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos