Inicio Gestión de la energía Controladores y alimentación para pantallas LCD y OLED
Inicio
Gestión de la energía
Controladores y alimentación para pantallas LCD y OLED

TPS65131-Q1

ACTIVO

Convertidor de carril dividido con salidas dobles, positivas y negativas (750 mA típ.) para automoci

Haga su pedido ahora
Hoja de datos

TPS65131-Q1

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Display type LCD bipolar IC integration LCD bias Vin (min) (V) 2.7 Vin (max) (V) 5.5 Applications 7 inches or less, 7 to 13 inches Source driver voltage (min) (V) -15 Source driver voltage (max) (V) 15 Level shifter/scan driver (Ch) 0 V_POS (min) (V) 3.2 V_POS (max) (V) 15 V_NEG (min) (V) -15 V_NEG (max) (V) -2 Features Adjustable sequencing Topology Split-Rail Rating Automotive Operating temperature range (°C) -40 to 105
Display type LCD bipolar IC integration LCD bias Vin (min) (V) 2.7 Vin (max) (V) 5.5 Applications 7 inches or less, 7 to 13 inches Source driver voltage (min) (V) -15 Source driver voltage (max) (V) 15 Level shifter/scan driver (Ch) 0 V_POS (min) (V) 3.2 V_POS (max) (V) 15 V_NEG (min) (V) -15 V_NEG (max) (V) -2 Features Adjustable sequencing Topology Split-Rail Rating Automotive Operating temperature range (°C) -40 to 105
VQFN (RGE) 24 16 mm² 4 x 4
  • Qualified for Automotive Applications
  • AEC-Q100 Test Guidance With the Following Results:
    • Device Temperature Grade 2: –40°C to 105°C Ambient Operating Temperature Range
    • Electrical Characteristics Tested Over –40°C to 125°C Junction Temperature Range
    • Device HBM ESD Classification Level H1C
    • Device CDM ESD Classification Level C4B
  • Dual Adjustable Output Voltages up to 15 V and down to –15 V
  • 2–A Typical Switch-Current Limit for Boost and Inverter Main Switches
  • High Conversion Efficiency
    • Up to 91% at Positive Output Rail
    • Up to 85% at Negative Output Rail
    • Power-Save Mode at Low Load
  • Independent Enable Inputs for Power-Up and Power-Down Sequencing
  • Control Output for External PFET to Support Complete Supply Disconnect When Shut Down
  • 2.7-V to 5.5-V Input-Voltage Range
  • Minimum 1.25-MHz Fixed-Frequency PWM Operation
  • Thermal Shutdown
  • Overvoltage Protection on Both Outputs
  • 0.2-µA Typical Shutdown Current
  • Small 4-mm × 4-mm QFN-24 Package (RGE)
  • Qualified for Automotive Applications
  • AEC-Q100 Test Guidance With the Following Results:
    • Device Temperature Grade 2: –40°C to 105°C Ambient Operating Temperature Range
    • Electrical Characteristics Tested Over –40°C to 125°C Junction Temperature Range
    • Device HBM ESD Classification Level H1C
    • Device CDM ESD Classification Level C4B
  • Dual Adjustable Output Voltages up to 15 V and down to –15 V
  • 2–A Typical Switch-Current Limit for Boost and Inverter Main Switches
  • High Conversion Efficiency
    • Up to 91% at Positive Output Rail
    • Up to 85% at Negative Output Rail
    • Power-Save Mode at Low Load
  • Independent Enable Inputs for Power-Up and Power-Down Sequencing
  • Control Output for External PFET to Support Complete Supply Disconnect When Shut Down
  • 2.7-V to 5.5-V Input-Voltage Range
  • Minimum 1.25-MHz Fixed-Frequency PWM Operation
  • Thermal Shutdown
  • Overvoltage Protection on Both Outputs
  • 0.2-µA Typical Shutdown Current
  • Small 4-mm × 4-mm QFN-24 Package (RGE)

The TPS65131-Q1 device is dual-output dc-dc converter generating a positive output voltage up to 15 V and a negative output voltage down to –15 V with output currents of typically 200 mA, depending on input-voltage to output-voltage ratio. With a total efficiency up to 85%, the device is ideal for portable battery-powered equipment. The input-voltage range of 2.7 V to 5.5 V allows, for example, 3.3-V and 5-V rails to power the TPS65131-Q1 device. The TPS65131-Q1 device comes in a QFN-24 package with thermal pad. Requiring few and small external components, the overall solution size can be small.

The converter operates with a fixed-frequency PWM control topology and, with power-save mode enabled, uses a pulse-skipping mode at light load currents. In operation, the typical overall device quiescent current is only 500 µA. In shutdown, the device draws typically 0.2 µA. Independent enable pins allow power-up and power-down sequencing for both outputs. The device has an internal current limit, overvoltage protection, and a thermal shutdown for highest reliability under fault conditions.

The TPS65131-Q1 device is qualified for automotive applications, according to AEC-Q100 temperature grade 2. The electrical characteristics are tested over –40°C to 125°C device junction temperature. This, combined with lowest shutdown currents, small solution size, package with thermal pad, plus good efficiency and protection features, targets automotive and industrial applications.

The TPS65131-Q1 device is dual-output dc-dc converter generating a positive output voltage up to 15 V and a negative output voltage down to –15 V with output currents of typically 200 mA, depending on input-voltage to output-voltage ratio. With a total efficiency up to 85%, the device is ideal for portable battery-powered equipment. The input-voltage range of 2.7 V to 5.5 V allows, for example, 3.3-V and 5-V rails to power the TPS65131-Q1 device. The TPS65131-Q1 device comes in a QFN-24 package with thermal pad. Requiring few and small external components, the overall solution size can be small.

The converter operates with a fixed-frequency PWM control topology and, with power-save mode enabled, uses a pulse-skipping mode at light load currents. In operation, the typical overall device quiescent current is only 500 µA. In shutdown, the device draws typically 0.2 µA. Independent enable pins allow power-up and power-down sequencing for both outputs. The device has an internal current limit, overvoltage protection, and a thermal shutdown for highest reliability under fault conditions.

The TPS65131-Q1 device is qualified for automotive applications, according to AEC-Q100 temperature grade 2. The electrical characteristics are tested over –40°C to 125°C device junction temperature. This, combined with lowest shutdown currents, small solution size, package with thermal pad, plus good efficiency and protection features, targets automotive and industrial applications.
filter Buscar otro/a Controladores y alimentación para pantallas LCD y OLED
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
TPS65100-Q1 ACTIVO Fuente de alimentación LCD de 2.7 V a 5.8 V para automoción con convertidor elevador, bomba de carga This product is an LCD supply with integrated VGH, VGL, Vcom, LDO and works with displays requiring +AVDD (instead of +/-AVDD).
TPS65150-Q1 ACTIVO Fuente de alimentación de polarización LCD compacta con búfer VCOM integrado para automoción This product uses +AVDD (instead of +/-AVDD), and integrates VGH, VGL, and Vcom.

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 8
Tipo Título Fecha
* Data sheet TPS65131-Q1 Positive- and Negative-Output DC-DC Converter datasheet (Rev. E) PDF | HTML 08 feb 2017
Application note Basic Calculation of a Boost Converter's Power Stage (Rev. D) PDF | HTML 28 oct 2022
Application note Understanding Undervoltage Lockout in Power Devices (Rev. A) 19 sep 2018
White paper Powering automotive displays to create interactive driving experiences 21 dic 2017
Application note Basic calculation of an inverting buck-boost power stage (Rev. A) 28 ago 2017
Technical article Split-rail converters reduce BOM size and cost in new automotive displays PDF | HTML 01 jul 2015
EVM User's guide TPS65131EVM User's Guide (Rev. C) 23 nov 2010
Application note Minimizing Ringing at the Switch Node of a Boost Converter 15 sep 2006

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Solicitar
Diseños de referencia

PMP9780 — Diseño de referencia: Alimentación LCD TFT bipolar con TPS65131-Q1 y bombas de carga

This reference design details a display power circuit which generates a bipolar voltage rail for source drivers and additional supplies for gate drivers. Charge pumps are used to generate the voltage supply for gate drivers, which makes this design easy to implement. By using only one dc-dc (...)
Test report: PDF
Esquema: PDF
Paquete Pasadores Descargar
VQFN (RGE) 24 Ver opciones
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos