Inicio Gestión de la energía Controladores y alimentación para pantallas LCD y OLED
Inicio
Gestión de la energía
Controladores y alimentación para pantallas LCD y OLED

TPS65150-Q1

ACTIVO

Fuente de alimentación de polarización LCD compacta con búfer VCOM integrado para automoción

Haga su pedido ahora
Hoja de datos

TPS65150-Q1

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Display type Automotive, LCD unipolar IC integration LCD bias, VCOM Vin (min) (V) 1.8 Vin (max) (V) 6 Applications 7 inches or less, 7 to 13 inches Source driver voltage (min) (V) 5 Source driver voltage (max) (V) 15 Level shifter/scan driver (Ch) 0 V_POS (max) (V) 30 V_NEG (max) (V) -2 Features Adjustable sequencing, GPM or GVS, VCOM or op amp Topology Boost Rating Automotive Operating temperature range (°C) -40 to 125
Display type Automotive, LCD unipolar IC integration LCD bias, VCOM Vin (min) (V) 1.8 Vin (max) (V) 6 Applications 7 inches or less, 7 to 13 inches Source driver voltage (min) (V) 5 Source driver voltage (max) (V) 15 Level shifter/scan driver (Ch) 0 V_POS (max) (V) 30 V_NEG (max) (V) -2 Features Adjustable sequencing, GPM or GVS, VCOM or op amp Topology Boost Rating Automotive Operating temperature range (°C) -40 to 125
HTSSOP (PWP) 24 49.92 mm² 7.8 x 6.4
  • AEC-Q100 Qualified:
    • Device Temperature Grade 1: –40°C to 125°C Junction Temperature
    • Device HBM ESD Classification According to AEC - Q100-002
    • Device CDM ESD Classification According to AEC - Q100-011
  • Input Voltage Range: 1.8 V to 6 V
  • V(VS) Boost Converter
    • Up to 15 V Output Voltage
    • < 1% Output Voltage Accuracy
    • 2-A Switch Current Limit
  • V(VGH) Positive Regulated Charge Pump Driver
    • Up to 30 V Output Voltage
    • Gate Voltage Shaping
  • V(VGL) Negative Regulated Charge Pump Driver
    • Down to –15 V Output Voltage
  • Integrated VCOM Buffer
  • Adjustable Power On Sequencing
    • Gate Drive Signal for External Isolation MOSFET for V(VS)
  • Protection Features
    • Out-of-Regulation Protection
    • Over-voltage Protection
    • Adjustable Fault Detection Timing
    • Thermal Shutdown
  • 24-Pin TSSOP Package with Exposed Thermal Pad
  • AEC-Q100 Qualified:
    • Device Temperature Grade 1: –40°C to 125°C Junction Temperature
    • Device HBM ESD Classification According to AEC - Q100-002
    • Device CDM ESD Classification According to AEC - Q100-011
  • Input Voltage Range: 1.8 V to 6 V
  • V(VS) Boost Converter
    • Up to 15 V Output Voltage
    • < 1% Output Voltage Accuracy
    • 2-A Switch Current Limit
  • V(VGH) Positive Regulated Charge Pump Driver
    • Up to 30 V Output Voltage
    • Gate Voltage Shaping
  • V(VGL) Negative Regulated Charge Pump Driver
    • Down to –15 V Output Voltage
  • Integrated VCOM Buffer
  • Adjustable Power On Sequencing
    • Gate Drive Signal for External Isolation MOSFET for V(VS)
  • Protection Features
    • Out-of-Regulation Protection
    • Over-voltage Protection
    • Adjustable Fault Detection Timing
    • Thermal Shutdown
  • 24-Pin TSSOP Package with Exposed Thermal Pad

The TPS65150-Q1 is an integrated power-supply for automotive LCD applications. The device integrates a boost converter for the source voltage and two regulated adjustable charge pump drivers for the gate voltages. For reduced external cost, improved picture quality and reduced image sticking, the device includes a VCOM buffer and a gate-voltage shaping function.

The device is designed to operate from a supply voltage of 1.8 V to 6 V making it ideal for automotive LCD applications using a fixed 3.3 V or 5 V input-voltage rail.

Adjustable power-on sequencing for VGL and VGH allow the device to be optimized for a variety of displays.

For protection from system malfunction, the TPS65150-Q1 integrates an adjustable shutdown latch feature. The device monitors the outputs (V(VS), V(VGL), V(VGH)); and, as soon as one of the outputs falls below its power-good threshold for longer than the adjustable fault delay time, the device enters shutdown.

The TPS65150-Q1 is an integrated power-supply for automotive LCD applications. The device integrates a boost converter for the source voltage and two regulated adjustable charge pump drivers for the gate voltages. For reduced external cost, improved picture quality and reduced image sticking, the device includes a VCOM buffer and a gate-voltage shaping function.

The device is designed to operate from a supply voltage of 1.8 V to 6 V making it ideal for automotive LCD applications using a fixed 3.3 V or 5 V input-voltage rail.

Adjustable power-on sequencing for VGL and VGH allow the device to be optimized for a variety of displays.

For protection from system malfunction, the TPS65150-Q1 integrates an adjustable shutdown latch feature. The device monitors the outputs (V(VS), V(VGL), V(VGH)); and, as soon as one of the outputs falls below its power-good threshold for longer than the adjustable fault delay time, the device enters shutdown.

open-in-new Buscar otro/a Controladores y alimentación para pantallas LCD y OLED
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
TPS65100-Q1 ACTIVO Fuente de alimentación LCD de 2.7 V a 5.8 V para automoción con convertidor elevador, bomba de carga This product is an LCD supply with the same features as the TPS65150-Q1 with an LDO.
TPS65131-Q1 ACTIVO Convertidor de carril dividido con salidas dobles, positivas y negativas (750 mA típ.) para automoci This product offers two rails up to +/-15V.

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 7
Tipo Título Fecha
* Data sheet TPS65150-Q1 Automotive LCD Power Supply for Source and Gate Drivers with Gate Voltage Shaping and VCOM Buffer datasheet (Rev. C) PDF | HTML 26 may 2017
Application note Basic Calculation of a Boost Converter's Power Stage (Rev. D) PDF | HTML 28 oct 2022
Application note Understanding Undervoltage Lockout in Power Devices (Rev. A) 19 sep 2018
White paper Powering automotive displays to create interactive driving experiences 21 dic 2017
Application note How to Calculate the Output Voltage Ranges of the Charge Pumps in the TPS65150 06 feb 2017
Technical article Split-rail converters reduce BOM size and cost in new automotive displays PDF | HTML 01 jul 2015
Application note Minimizing Ringing at the Switch Node of a Boost Converter 15 sep 2006

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS65150EVM-697 — Módulo de evaluación TPS65150 de fuente de alimentación (polarización) LCD de baja tensión de entrad

The TPS65150 offers a very compact and small power supply solution that provides all three voltages required by thin film transistor (TFT) LCD displays. With an input voltage range of 1.8 V to 6 V, the device is ideal for notebooks powered by a 2.5 V or 3.3 V input rail or monitor applications with (...)

Guía del usuario: PDF
No disponible en TI.com
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Solicitar
Paquete Pasadores Descargar
HTSSOP (PWP) 24 Ver opciones
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos