제품 상세 정보

Sample rate (max) (Msps) 1500, 3000 Resolution (Bits) 8 Number of input channels 1, 2 Interface type Parallel LVDS Analog input BW (MHz) 2000 Features Ultra High Speed Rating Catalog Peak-to-peak input voltage range (V) 0.87 Power consumption (typ) (mW) 2000 Architecture Folding Interpolating SNR (dB) 47 ENOB (bit) 7.4 SFDR (dB) 58 Operating temperature range (°C) -40 to 85 Input buffer Yes
Sample rate (max) (Msps) 1500, 3000 Resolution (Bits) 8 Number of input channels 1, 2 Interface type Parallel LVDS Analog input BW (MHz) 2000 Features Ultra High Speed Rating Catalog Peak-to-peak input voltage range (V) 0.87 Power consumption (typ) (mW) 2000 Architecture Folding Interpolating SNR (dB) 47 ENOB (bit) 7.4 SFDR (dB) 58 Operating temperature range (°C) -40 to 85 Input buffer Yes
HLQFP (NNB) 128 484 mm² 22 x 22
  • Single +1.9V ±0.1V Operation
  • Interleave Mode for 2x Sample Rate
  • Multiple ADC Synchronization Capability
  • Adjustment of Input Full-Scale Range, Clock Phase, and Offset
  • Choice of SDR or DDR Output Clocking
  • 1:1 or 1:2 Selectable Output Demux
  • Second DCLK Output
  • Duty Cycle Corrected Sample Clock
  • Test Pattern

Key Specification

  • Resolution: 8 Bits
  • Max Conversion Rate: 1.5 GSPS (max)
  • Code Error Rate: 10-18 (typ)
  • ENOB @ 748 MHz Input: 7.4 Bits (typ)
  • DNL: ±0.15 LSB (typ)
  • Power Consumption (Non-DES Mode)
    • Operating in Non-Demux Mode:1.6 W (typ)
    • Operating in 1:2 Demux Mode: 2.0 W (typ)
    • Power Down Mode: 3.5 mW (typ)

All trademarks are the property of their respective owners.

  • Single +1.9V ±0.1V Operation
  • Interleave Mode for 2x Sample Rate
  • Multiple ADC Synchronization Capability
  • Adjustment of Input Full-Scale Range, Clock Phase, and Offset
  • Choice of SDR or DDR Output Clocking
  • 1:1 or 1:2 Selectable Output Demux
  • Second DCLK Output
  • Duty Cycle Corrected Sample Clock
  • Test Pattern

Key Specification

  • Resolution: 8 Bits
  • Max Conversion Rate: 1.5 GSPS (max)
  • Code Error Rate: 10-18 (typ)
  • ENOB @ 748 MHz Input: 7.4 Bits (typ)
  • DNL: ±0.15 LSB (typ)
  • Power Consumption (Non-DES Mode)
    • Operating in Non-Demux Mode:1.6 W (typ)
    • Operating in 1:2 Demux Mode: 2.0 W (typ)
    • Power Down Mode: 3.5 mW (typ)

All trademarks are the property of their respective owners.

The ADC08D1520 is a dual, low power, high performance CMOS analog-to-digital converter that builds upon the ADC08D1500 platform. The ADC08D1520 digitizes signals to 8 bits of resolution at sample rates up to 1.7 GSPS. It has expanded features compared to the ADC08D1500, which include a test pattern output for system debug, a clock phase adjust, and selectable output demultiplexer modes. Consuming a typical 1.6 Watts in Non-Demultiplex Mode at 1.0 GSPS from a single 1.9 Volt supply, this device is guaranteed to have no missing codes over the full operating temperature range. The unique folding and interpolating architecture, the fully differential comparator design, the innovative design of the internal sample-and-hold amplifier and the self-calibration scheme enable a very flat response of all dynamic parameters beyond Nyquist, producing a high 7.4 Effective Number of Bits (ENOB) with a 748 MHz input signal and a 1.5 GHz sample rate while providing a 10-18 Code Error Rate (C.E.R.) Output formatting is offset binary and the Low Voltage Differential Signaling (LVDS) digital outputs are compatible with IEEE 1596.3-1996, with the exception of an adjustable common mode voltage between 0.8V and 1.2V.

Each converter has a selectable output demultiplexer which feeds two LVDS buses. If the 1:2 Demultiplexed Mode is selected, the output data rate is reduced to half the input sample rate on each bus. When Non-Demultiplexed Mode is selected, the output data rate on channels DI and DQ is at the same rate as the input sample clock. The two converters can be interleaved and used as a single 3 GSPS ADC.

The converter typically consumes less than 3.5 mW in the Power Down Mode and is available in a leaded or lead-free, 128-pin, thermally enhanced, HLQFP and operates over the Industrial (-40°C ≤ TA ≤ +85°C) temperature range.

The ADC08D1520 is a dual, low power, high performance CMOS analog-to-digital converter that builds upon the ADC08D1500 platform. The ADC08D1520 digitizes signals to 8 bits of resolution at sample rates up to 1.7 GSPS. It has expanded features compared to the ADC08D1500, which include a test pattern output for system debug, a clock phase adjust, and selectable output demultiplexer modes. Consuming a typical 1.6 Watts in Non-Demultiplex Mode at 1.0 GSPS from a single 1.9 Volt supply, this device is guaranteed to have no missing codes over the full operating temperature range. The unique folding and interpolating architecture, the fully differential comparator design, the innovative design of the internal sample-and-hold amplifier and the self-calibration scheme enable a very flat response of all dynamic parameters beyond Nyquist, producing a high 7.4 Effective Number of Bits (ENOB) with a 748 MHz input signal and a 1.5 GHz sample rate while providing a 10-18 Code Error Rate (C.E.R.) Output formatting is offset binary and the Low Voltage Differential Signaling (LVDS) digital outputs are compatible with IEEE 1596.3-1996, with the exception of an adjustable common mode voltage between 0.8V and 1.2V.

Each converter has a selectable output demultiplexer which feeds two LVDS buses. If the 1:2 Demultiplexed Mode is selected, the output data rate is reduced to half the input sample rate on each bus. When Non-Demultiplexed Mode is selected, the output data rate on channels DI and DQ is at the same rate as the input sample clock. The two converters can be interleaved and used as a single 3 GSPS ADC.

The converter typically consumes less than 3.5 mW in the Power Down Mode and is available in a leaded or lead-free, 128-pin, thermally enhanced, HLQFP and operates over the Industrial (-40°C ≤ TA ≤ +85°C) temperature range.

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀
ADC08D1020 활성 8비트, 듀얼 1.0GSPS 또는 싱글 2.0GSPS 아날로그-디지털 컨버터(ADC) Pin-for-pin 1-GSPS product
비교 대상 장치와 유사한 기능
ADC081500 활성 8비트, 1.5 GSPS 아날로그-디지털 컨버터(ADC) Single channel, same speed and resolution

기술 문서

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기4
유형 직함 날짜
* Data sheet ADC08D1520 Low Power, 8-Bit, Dual 1.5 GSPS or Single 3.0 GSPS A/D Converter datasheet (Rev. D) 2013/03/14
Application note AN-1558 Clocking High-Speed A/D Converters (Rev. B) 2013/05/01
User guide ADC0XD1520RB Reference Board Users’ Guide 2012/08/22
User guide ADC08D1520RB Reference Board Users’ Guide 2012/07/01

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

ADC08D1520RB — ADC08D1520RB: 저전력, 8비트, 듀얼 1.5GSPS 또는 싱글 3.0GSPS A/D 컨버터 레퍼런스 보드

The ADC08D1520 is the latest advance in Texas Instrument’s Ultra-High-Speed ADC family. This low-power, high-performance CMOS analog-to-digital converter digitizes signals at 8-bit resolution for dual channels at sampling rates of up to 1.5 GSPS (Non-Interleave Mode) or for a single channel up to (...)

사용 설명서: PDF
TI.com에서 구매할 수 없습니다
지원 소프트웨어

WAVEVISION5 WaveVision 5 Software

WaveVision 5 software is part of the WaveVision evaluation system that also includes WaveVision 5 Data Capture Board. The WaveVision 5 system is an easy-to-use data acquisition and analysis tool, designed to help users evaluate Texas Instruments' Signal Path solutions.

While WaveVision 5 software (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
고속 ADC(≥10 MSPS)
ADC08D1020 8비트, 듀얼 1.0GSPS 또는 싱글 2.0GSPS 아날로그-디지털 컨버터(ADC) ADC08D1520 8비트, 듀얼 1.5GSPS 또는 싱글 3.0GSPS 아날로그-디지털 컨버터(ADC) ADC10D1000 10비트, 듀얼 1.0GSPS 또는 싱글 2.0GSPS 아날로그-디지털 컨버터(ADC) ADC10D1500 10비트, 듀얼 1.5GSPS 또는 싱글 3.0GSPS 아날로그-디지털 컨버터(ADC) ADC10DV200 듀얼 채널, 10비트, 200MSPS 아날로그-디지털 컨버터(ADC) ADC12D1000 12비트, 듀얼 1.0GSPS 또는 싱글 2.0GSPS 아날로그-디지털 컨버터(ADC) ADC12D1000RF 12비트, 듀얼 1.0GSPS 또는 싱글 2.0GSPS, RF 샘플링 아날로그-디지털 컨버터(ADC) ADC12D1600 12비트, 듀얼 1.6GSPS 또는 싱글 3.2GSPS 아날로그-디지털 컨버터(ADC) ADC12D1600RF 12비트, 듀얼 1.6GSPS 또는 싱글 3.2GSPS, RF 샘플링 아날로그-디지털 컨버터(ADC) ADC12D1800 12비트, 듀얼 1.8GSPS 또는 싱글 3.6GSPS 아날로그-디지털 컨버터(ADC) ADC12D1800RF 12비트, 듀얼 1.8GSPS 또는 싱글 3.6GSPS, RF 샘플링 아날로그-디지털 컨버터(ADC) ADC12D500RF 12비트, 듀얼 500MSPS 또는 싱글 1.0GSPS, RF 샘플링 아날로그-디지털 컨버터(ADC) ADC12D800RF 12비트, 듀얼 800MSPS 또는 싱글 1.6GSPS, RF 샘플링 아날로그-디지털 컨버터(ADC) ADC14DC080 듀얼 채널, 14비트, 80MSPS, 1.0GHz 입력 대역폭 아날로그-디지털 컨버터(ADC) ADC16DV160 듀얼 채널, 16비트, 160MSPS 아날로그-디지털 컨버터(ADC) ADC16V130 16비트, 130MSPS, 아날로그-디지털 컨버터(ADC)
하드웨어 개발
평가 보드
ADC08D1520RB ADC08D1520RB: 저전력, 8비트, 듀얼 1.5GSPS 또는 싱글 3.0GSPS A/D 컨버터 레퍼런스 보드 ADC12D1600RB 12비트, 듀얼 1.6/1.8GSPS 또는 싱글 3.2/3.6GSPS ADC 레퍼런스 보드 ADC16DV160HFEB ADC16DV160HFEB 평가 보드 LM98640CVAL 듀얼 채널, 14비트, 40MSPS 아날로그 프론트 엔드, LVDS 출력 포함 WAVEVSN-BRD-5.1 WaveVision 5 데이터 캡처 보드 버전 5.1
소프트웨어
애플리케이션 소프트웨어 및 프레임워크
WAVEVISION5 데이터 수집 및 분석 소프트웨어
시뮬레이션 모델

ADC08D1520 IBIS MODEL

SNAM178.ZIP (19 KB) - IBIS Model
회로도

ADC0xD1520RB Design Package

SNAR019.ZIP (15156 KB)
시뮬레이션 툴

PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®

TI용 PSpice®는 아날로그 회로의 기능을 평가하는 데 사용되는 설계 및 시뮬레이션 환경입니다. 완전한 기능을 갖춘 이 설계 및 시뮬레이션 제품군은 Cadence®의 아날로그 분석 엔진을 사용합니다. 무료로 제공되는 TI용 PSpice에는 아날로그 및 전력 포트폴리오뿐 아니라 아날로그 행동 모델에 이르기까지 업계에서 가장 방대한 모델 라이브러리 중 하나가 포함되어 있습니다.

TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
패키지 다운로드
HLQFP (NNB) 128 옵션 보기

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상