LM123QML
- 3 Amp Output Current
- Internal Current and Thermal Limiting
- 0.01Ω Typical Output Impedance
- 7.5V Minimum Input Voltage
- 30W Power Dissipation
All trademarks are the property of their respective owners.
The LM123 is a three-terminal positive regulator with a preset 5V output and a load driving capability of 3 amps. New circuit design and processing techniques are used to provide the high output current without sacrificing the regulation characteristics of lower current devices.
The 3 amp regulator is virtually blowout proof. Current limiting, power limiting, and thermal shutdown provide the same high level of reliability obtained with these techniques in the LM109 1 amp regulator.
No external components are required for operation of the LM123. If the device is more than 4 inches from the filter capacitor, however, a 1 μF solid tantalum capacitor should be used on the input. A 0.1 μF or larger capacitor may be used on the output to reduce load transient spikes created by fast switching digital logic, or to swamp out stray load capacitance.
An overall worst case specification for the combined effects of input voltage, load currents, ambient temperature, and power dissipation ensure that the LM123 will perform satisfactorily as a system element.
For applications requiring other voltages, see LM150 series adjustable regulator data sheet.
기술 문서
유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | LM123QML 3-Amp, 5-Volt Positive Regulator datasheet (Rev. A) | 2013/04/22 | |
Application note | A Topical Index of TI LDO Application Notes (Rev. F) | 2019/06/27 | ||
Application note | AN-103 LM340 Series Three Terminal Positive Regulators (Rev. A) | 2013/05/06 | ||
Application note | AN-1148 Linear Regulators: Theory of Operation and Compensation (Rev. B) | 2013/05/06 | ||
Application note | Method For Cal Output Voltage Tolerances in Adj Regs (Rev. A) | 2013/05/05 | ||
Application note | Packaging Limits Range of Linear Regulators | 2010/05/08 | ||
Application note | Digital Designer's Guide to Linear Voltage Regulators & Thermal Mgmt (LDO) (Rev. A) | 2008/06/04 | ||
Application note | Understanding the Terms and Definitions of LDO Voltage Regulators | 1999/10/21 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
패키지 | 핀 | 다운로드 |
---|---|---|
TO-CAN (K) | 2 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치