전원 관리 LED 드라이버 RGB LED 드라이버

LM2751

활성

조정된 2배, 1.5X 스위치드 커패시터 백색 LED 드라이버

제품 상세 정보

Number of channels 1 LED current per channel (mA) 150 LED configuration Parallel, Series, Single Program memory No Topology Boost Programmable ramp control No Vin (min) (V) 2.8 Vin (max) (V) 5.5 Iout (max) (A) 0.15 Features Enable/Shutdown, GPIO interface Iq (typ) (mA) 1 Shutdown current (ISD) (typ) (µA) 0.77 Operating temperature range (°C) -40 to 85 Rating Catalog
Number of channels 1 LED current per channel (mA) 150 LED configuration Parallel, Series, Single Program memory No Topology Boost Programmable ramp control No Vin (min) (V) 2.8 Vin (max) (V) 5.5 Iout (max) (A) 0.15 Features Enable/Shutdown, GPIO interface Iq (typ) (mA) 1 Shutdown current (ISD) (typ) (µA) 0.77 Operating temperature range (°C) -40 to 85 Rating Catalog
WSON (DSC) 10 9 mm² 3 x 3
  • Regulated Output Options: 4.5V, 5.0V
  • Output Voltage Regulated Within 3%
  • Peak Efficiency Over 90%
  • 150mA (4.5V) or 80mA (5.0V) Output Current Capability
  • Input Voltage Range: 2.8V to 5.5V
  • Low Input and Output Voltage Ripple
  • <1µA Typical Shutdown Current
  • Small Solution Size - NO INDUCTOR
  • Programmable 725kHz, 300kHz, 37kHz, or 9.5kHz Switching Frequencies
  • 10-pin SON No-Pullback Package: 3mm × 3mm × 0.8mm

All trademarks are the property of their respective owners.

  • Regulated Output Options: 4.5V, 5.0V
  • Output Voltage Regulated Within 3%
  • Peak Efficiency Over 90%
  • 150mA (4.5V) or 80mA (5.0V) Output Current Capability
  • Input Voltage Range: 2.8V to 5.5V
  • Low Input and Output Voltage Ripple
  • <1µA Typical Shutdown Current
  • Small Solution Size - NO INDUCTOR
  • Programmable 725kHz, 300kHz, 37kHz, or 9.5kHz Switching Frequencies
  • 10-pin SON No-Pullback Package: 3mm × 3mm × 0.8mm

All trademarks are the property of their respective owners.

The LM2751 is a constant frequency switched capacitor charge pump with regulated output voltage options of 4.5V, and 5.0V. Over the input voltage range of 2.8V to 5.5V the LM2751 provides up to 150mA of output current and requires only four low-cost ceramic capacitors.

The LM2751 provides excellent efficiency without the use of an inductor by operating the charge pump in a gain of 3/2 or 2. The proper gain for maintaining regulation is chosen so that efficiency is maximized over the input voltage range.

LM2751 uses constant frequency pre-regulation to minimize conducted noise on the input and provide a predictable switching frequency. The switching frequency is programmable to 725kHz, 300kHz, 37kHz, or 9.5kHz.

LM2751 is available in a 10-pin SON No-Pullback Package.

The LM2751 is a constant frequency switched capacitor charge pump with regulated output voltage options of 4.5V, and 5.0V. Over the input voltage range of 2.8V to 5.5V the LM2751 provides up to 150mA of output current and requires only four low-cost ceramic capacitors.

The LM2751 provides excellent efficiency without the use of an inductor by operating the charge pump in a gain of 3/2 or 2. The proper gain for maintaining regulation is chosen so that efficiency is maximized over the input voltage range.

LM2751 uses constant frequency pre-regulation to minimize conducted noise on the input and provide a predictable switching frequency. The switching frequency is programmable to 725kHz, 300kHz, 37kHz, or 9.5kHz.

LM2751 is available in a 10-pin SON No-Pullback Package.

다운로드 스크립트와 함께 비디오 보기 동영상

기술 문서

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기3
유형 직함 날짜
* Data sheet LM2751 Regulated 2X, 1.5X Switched Capacitor White LED Driver datasheet (Rev. B) 2013/05/01
White paper Common LED Functions and LED Driver Design Considerations 2020/09/21
Application note How to Select a RGB LED Driver 2019/08/08

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

시뮬레이션 툴

PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®

TI용 PSpice®는 아날로그 회로의 기능을 평가하는 데 사용되는 설계 및 시뮬레이션 환경입니다. 완전한 기능을 갖춘 이 설계 및 시뮬레이션 제품군은 Cadence®의 아날로그 분석 엔진을 사용합니다. 무료로 제공되는 TI용 PSpice에는 아날로그 및 전력 포트폴리오뿐 아니라 아날로그 행동 모델에 이르기까지 업계에서 가장 방대한 모델 라이브러리 중 하나가 포함되어 있습니다.

TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
패키지 다운로드
WSON (DSC) 10 옵션 보기

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상