LM3678
- VOUT = 0.8 V or 1.2 V
- VIN = 2.5 V to 5.5 V
- 1.5-A Maximum Load Capability
- 3.3-MHz (Typical) PWM Fixed Switching Frequency Allows Use of 1-µH Inductor
- ±3% DC Output Voltage Precision
- 0.01-µA (Typical) Shutdown Current
- Internal Synchronous Rectification for High Efficiency
- Internal Soft Start
- Current Overload and Thermal Shutdown Protection
All trademarks are the property of their respective owners.
The LM3678 step-down DC-DC converter is optimized for powering low-voltage circuits from a single Li-Ion cell battery and input voltage rails from 2.5 V to 5.5 V. It provides up to 1.5-A load current, over the entire input voltage range. LM3678 offers a 0.8V or 1.2V option. One of the pair of voltages is set through the VSELECT pin.
LM3678 operates in PWM mode with a fixed frequency of 3.3 MHz. Internal synchronous rectification provides high efficiency during PWM mode operation. In shutdown mode, the device turns off and reduces battery consumption to 0.01 µA (typical).
The LM3678 is available in a 3mm x 3mm DSC-10 package. A high switching frequency of 3.3 MHz (typical) allows use of tiny surface-mount components. Only three external surface-mount components, an inductor and two ceramic capacitors, are required (solution size less than 33 mm2). For voltages other than the voltage shown, contact TI or your distributor.
기술 문서
유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | H-Perform, Mini 1.5-A Step-Dwn DC-DC Cnvrtr for Handheld Apps datasheet (Rev. C) | 2013/05/02 | |
Selection guide | Power Management Guide 2018 (Rev. R) | 2018/06/25 | ||
EVM User's guide | AN-1722 LM3678 Evaluation Board (Rev. B) | 2013/04/30 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
패키지 | 핀 | 다운로드 |
---|---|---|
WSON (DSC) | 10 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치