전원 관리 AC/DC & DC/DC controllers (external FET)

LM5035

활성

하프 브리지 및 SyncFET 드라이버 통합 PWM 컨트롤러

제품 상세 정보

Vin (max) (V) 15 Operating temperature range (°C) -40 to 125 Control mode Feedforward Topology Half bridge Rating Catalog Duty cycle (max) (%) 50
Vin (max) (V) 15 Operating temperature range (°C) -40 to 125 Control mode Feedforward Topology Half bridge Rating Catalog Duty cycle (max) (%) 50
HTSSOP (PWP) 20 41.6 mm² 6.5 x 6.4 WQFN (NHZ) 24 20 mm² 5 x 4
  • 105-V, 2-A Half-Bridge Gate Drivers
  • Synchronous Rectifier-Control Outputs With
    Programmable Delays
  • High-Voltage (105-V) Start-up Regulator
  • Voltage Mode Control With Line Feedforward and
    Volt-Second Limiting
  • Resistor Programmed, 2-MHz Capable Oscillator
  • Patent Pending Oscillator Synchronization
  • Programmable Line Undervoltage Lockout
  • Line Overvoltage Protection
  • Internal Thermal Shutdown Protection
  • Adjustable Soft-Start
  • Versatile Dual Mode Overcurrent Protection With
    Hiccup Delay Timer
  • Cycle-by-Cycle Overcurrent Protection
  • Direct Optocoupler Interface
  • 5-V Reference Output
  • 105-V, 2-A Half-Bridge Gate Drivers
  • Synchronous Rectifier-Control Outputs With
    Programmable Delays
  • High-Voltage (105-V) Start-up Regulator
  • Voltage Mode Control With Line Feedforward and
    Volt-Second Limiting
  • Resistor Programmed, 2-MHz Capable Oscillator
  • Patent Pending Oscillator Synchronization
  • Programmable Line Undervoltage Lockout
  • Line Overvoltage Protection
  • Internal Thermal Shutdown Protection
  • Adjustable Soft-Start
  • Versatile Dual Mode Overcurrent Protection With
    Hiccup Delay Timer
  • Cycle-by-Cycle Overcurrent Protection
  • Direct Optocoupler Interface
  • 5-V Reference Output

The LM5035 half-bridge controller-gate driver contains all of the features necessary to implement half-bridge topology power converters using voltage mode control with line voltage feedforward. The floating high-side gate driver is capable of operating with supply voltages up to 105 V. Both the high-side and low-side gate drivers are capable of 2-A peak. An internal high voltage start-up regulator is included, along with programmable line undervoltage lockout (UVLO) and overvoltage protection (OVP). The oscillator is programmed with a single resistor to frequencies up to 2 MHz. The oscillator can also be synchronized to an external clock. A current sense input and a programmable timer provide cycle-by-cycle current limit and adjustable hiccup mode overload protection.

The LM5035 half-bridge controller-gate driver contains all of the features necessary to implement half-bridge topology power converters using voltage mode control with line voltage feedforward. The floating high-side gate driver is capable of operating with supply voltages up to 105 V. Both the high-side and low-side gate drivers are capable of 2-A peak. An internal high voltage start-up regulator is included, along with programmable line undervoltage lockout (UVLO) and overvoltage protection (OVP). The oscillator is programmed with a single resistor to frequencies up to 2 MHz. The oscillator can also be synchronized to an external clock. A current sense input and a programmable timer provide cycle-by-cycle current limit and adjustable hiccup mode overload protection.

다운로드 스크립트와 함께 비디오 보기 동영상

기술 문서

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기5
유형 직함 날짜
* Data sheet LM5035 PWM Controller With Integrated Half-Bridge and SyncFET Drivers datasheet (Rev. H) PDF | HTML 2015/10/15
Selection guide Power Management Guide 2018 (Rev. R) 2018/06/25
EVM User's guide AN-1435 LM5035 Evaluation Board (Rev. A) 2013/05/06
EVM User's guide AN-1755 LM5035A Evaluation Board (Rev. A) 2013/05/06
User guide AN-2043 LM5035C Evaluation Board (Rev. A) 2013/05/06

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

LM5035CEVAL — LM5035C용 평가 보드

The LM5035C evaluation board is designed to provide the design engineer with a fully functional power converter based on the Half Bridge topology to evaluate the LM5035C controller. The LM5035C is a functional variant of the LM5035B Half-Bridge PWM Controller. The amplitude of the SR control (...)

사용 설명서: PDF
TI.com에서 구매할 수 없습니다
시뮬레이션 모델

LM5035 PSPICE Model

SNVM018.ZIP (313 KB) - PSpice Model
패키지 다운로드
HTSSOP (PWP) 20 옵션 보기
WQFN (NHZ) 24 옵션 보기

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상