MAX660

활성

10kHz/80kHz 스위치드 커패시터 전압 컨버터

지금 주문

데이터시트

document-pdfAcrobat MAX660 Switched Capacitor Voltage Converter datasheet (Rev. B) (영어) PDF | HTML

MAX660

활성

데이터시트

지금 주문

제품 상세 정보

Iout (max) (A)

0.1

Vin (min) (V)

1.5

Vin (max) (V)

5.5

Type

Charge pump

Switching frequency (min) (kHz)

10

Switching frequency (max) (kHz)

80

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Iq (typ) (A)

0.001

Iout (max) (A)

0.1

Vin (min) (V)

1.5

Vin (max) (V)

5.5

Type

Charge pump

Switching frequency (min) (kHz)

10

Switching frequency (max) (kHz)

80

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Iq (typ) (A)

0.001

SOIC (D)

8

29.4 mm² 4.9 x 6

Inverts or Doubles Input Supply Voltage
Narrow SO-8 Package
6.5-Ω Typical Output Resistance
88% Typical Conversion Efficiency at 100 mA
Selectable Oscillator Frequency: 10 kHz/80 kHz

Inverts or Doubles Input Supply Voltage
Narrow SO-8 Package
6.5-Ω Typical Output Resistance
88% Typical Conversion Efficiency at 100 mA
Selectable Oscillator Frequency: 10 kHz/80 kHz

The MAX660 CMOS charge-pump voltage converter is a versatile unregulated switched-capacitor inverter or doubler. Operating from a wide 1.5-V to 5.5-V supply voltage, the MAX660 uses two low-cost capacitors to provide 100 mA of output current without the cost, size and EMI related to inductor-based converters. With an operating current of only 120 µA and operating efficiency greater than 90% at most loads, the MAX660 provides ideal performance for battery-powered systems. MAX660 devices can be operated directly in parallel to lower output impedance, thus providing more current at a given voltage.

The FC (frequency control) pin selects between a nominal 10-kHz or 80-kHz oscillator frequency. The oscillator frequency can be lowered by adding an external capacitor to the OSC pin. Also, the OSC pin may be used to drive the MAX660 with an external clock up to 150 kHz. Through these methods, output ripple frequency and harmonics may be controlled.

Additionally, the MAX660 may be configured to divide a positive input voltage precisely in half. In this mode, input voltages as high as 11 V may be used.

The MAX660 CMOS charge-pump voltage converter is a versatile unregulated switched-capacitor inverter or doubler. Operating from a wide 1.5-V to 5.5-V supply voltage, the MAX660 uses two low-cost capacitors to provide 100 mA of output current without the cost, size and EMI related to inductor-based converters. With an operating current of only 120 µA and operating efficiency greater than 90% at most loads, the MAX660 provides ideal performance for battery-powered systems. MAX660 devices can be operated directly in parallel to lower output impedance, thus providing more current at a given voltage.

The FC (frequency control) pin selects between a nominal 10-kHz or 80-kHz oscillator frequency. The oscillator frequency can be lowered by adding an external capacitor to the OSC pin. Also, the OSC pin may be used to drive the MAX660 with an external clock up to 150 kHz. Through these methods, output ripple frequency and harmonics may be controlled.

Additionally, the MAX660 may be configured to divide a positive input voltage precisely in half. In this mode, input voltages as high as 11 V may be used.

open-in-new

기타 AC/DC & DC/DC converters (integrated FET) 찾기

다운로드 스크립트와 함께 비디오 보기 동영상