TPS51225B

Name: TPS51225B
Brand: TI
SKU: TPS51225B
Price: 0.716 USD

활성

Out-of-Audio™ 모드를 지원하는 5.5V~24V, 듀얼 동기 벅 컨트롤러

지금 주문

데이터시트

document-pdfAcrobat Dual Synchronous Step-Down Controller with 5-V and 3.3-V LDOs datasheet (Rev. B) (영어)

이 제품의 최신 버전이 있습니다

open-in-new

대안 비교

비교 대상 장치와 유사한 기능

TPS51397A

활성

4.5V~24V 입력, 10A 동기식 강압 조절기 Faster switching frequency and extended positive operating temperature range.

TPS51225B

활성

데이터시트

지금 주문

제품 상세 정보

Vin (min) (V)

5.5

Vin (max) (V)

24

Iout (max) (A)

10

Operating temperature range (°C)

-40 to 85

Control mode

D-CAP

Rating

Catalog

Vout (min) (V)

4.5

Vout (max) (V)

5.5

Iq (typ) (A)

0.0009

Duty cycle (max) (%)

90

Vin (min) (V)

5.5

Vin (max) (V)

24

Iout (max) (A)

10

Operating temperature range (°C)

-40 to 85

Control mode

D-CAP

Rating

Catalog

Vout (min) (V)

4.5

Vout (max) (V)

5.5

Iq (typ) (A)

0.0009

Duty cycle (max) (%)

90

WQFN (RUK)

20

9 mm² 3 x 3

Input Voltage Range: 5.5 V to 24 V
Output Voltages: 5 V and 3.3 V (Adjustable Range ±10%)
Built-in, 100-mA, 5-V and 3.3-V LDOs
Clock Output for Charge-Pump
±1% Reference Accuracy
Adaptive On-time D-CAP Mode Control Architecture with 300kHz/355kHz Frequency Setting
Auto-skip Light Load Operation (TPS51225/C)
OOA Light Load Operation (TPS51225B)
Internal 0.8-ms Voltage Servo Soft-Start
Low-Side R_DS(on)Current Sensing Scheme with 4500 ppm/°C Temperature Coefficient
Built-in Output Discharge Function
Separate Enable Input for Switchers (TPS51225/B/C)
Dedicated OC Setting Terminals
Power Good Indicator
OVP/UVP/OCP Protection
Non-latch UVLO/OTP Protection
20-Pin, 3 mm × 3 mm, QFN (RUK)

Input Voltage Range: 5.5 V to 24 V
Output Voltages: 5 V and 3.3 V (Adjustable Range ±10%)
Built-in, 100-mA, 5-V and 3.3-V LDOs
Clock Output for Charge-Pump
±1% Reference Accuracy
Adaptive On-time D-CAP Mode Control Architecture with 300kHz/355kHz Frequency Setting
Auto-skip Light Load Operation (TPS51225/C)
OOA Light Load Operation (TPS51225B)
Internal 0.8-ms Voltage Servo Soft-Start
Low-Side R_DS(on)Current Sensing Scheme with 4500 ppm/°C Temperature Coefficient
Built-in Output Discharge Function
Separate Enable Input for Switchers (TPS51225/B/C)
Dedicated OC Setting Terminals
Power Good Indicator
OVP/UVP/OCP Protection
Non-latch UVLO/OTP Protection
20-Pin, 3 mm × 3 mm, QFN (RUK)

The TPS51225/B/C is a cost-effective, dual-synchronous buck controller targeted for notebook system-power supply solutions. It provides 5-V and 3.3-V LDOs and requires few external components. The 260-kHz VCLK output can be used to drive an external charge pump, generating gate drive voltage for the load switches without reducing the main converter efficiency. The TPS51225/B/C supports high efficiency, fast transient response and provides a combined power-good signal. Adaptive on-time, D-CAP™ control provides convenient and efficient operation. The device operates with supply input voltage ranging from 5.5 V to 24 V and supports output voltages of 5.0 V and 3.3 V. The TPS51225/B/C is available in a 20-pin, 3 mm × 3 mm, QFN package and is specified from –40°C to 85°C.

open-in-new

기타 AC/DC & DC/DC controllers (external FET) 찾기

다운로드 스크립트와 함께 비디오 보기 동영상

기술 문서

star

=TI에서 선정한 이 제품의 인기 문서

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.

모두 보기2

	유형	직함		날짜
*	Data sheet	Dual Synchronous Step-Down Controller with 5-V and 3.3-V LDOs datasheet (Rev. B)		2012/09/09
	Application note	Mosfet Driver Circuit Design Guide for TPS512xx (Rev. A)		2019/04/01