首頁 電池管理 IC 電池充電器 IC
首頁
電池管理 IC
電池充電器 IC

BQ24203

現行

採用 MSOP-8 封裝、顯示充電狀態、適用於電流限制應用的 500-mA、4.1-V 鋰離子充電器

立即訂購
產品規格表

BQ24203

現行
產品規格表 立即訂購

產品詳細資料

Number of series cells 1 Charge current (max) (A) 0.5 Vin (max) (V) 13.5 Cell chemistry Li-Ion/Li-Polymer Battery charge voltage (min) (V) 4.1 Battery charge voltage (max) (V) 4.1 Absolute max Vin (max) (V) 16.5 Control topology Linear Control interface Standalone (RC-Settable) Features BAT temp thermistor monitoring (hot/cold profile) Vin (min) (V) 2.8 Rating Catalog Operating temperature range (°C) -40 to 85
Number of series cells 1 Charge current (max) (A) 0.5 Vin (max) (V) 13.5 Cell chemistry Li-Ion/Li-Polymer Battery charge voltage (min) (V) 4.1 Battery charge voltage (max) (V) 4.1 Absolute max Vin (max) (V) 16.5 Control topology Linear Control interface Standalone (RC-Settable) Features BAT temp thermistor monitoring (hot/cold profile) Vin (min) (V) 2.8 Rating Catalog Operating temperature range (°C) -40 to 85
HVSSOP (DGN) 8 14.7 mm² 3 x 4.9
  • Designed Specifically to Work With Current-Limited Wall Supplies
  • Ideal for Low Dropout Charger Design for Single-Cell Li-Ion Packs With Coke or Graphite Anodes
  • Integrated PowerFET for 500 mA
  • Integrated Voltage Regulation With 0.5% Accuracy
  • Battery Insertion and Removal Detection
  • Charge Termination by Minimum Current and Time
  • Pre-Charge Conditioning With Safety Timer
  • Sleep Mode for Low-Power Consumption
  • Charge Status Output for LED or Host Processor Interface Indicates
  • Charge-in-Progress, Charge Completion, and Fault Conditions
  • Optional Temperature Monitoring Before and During Charge
  • Small, 8-Pin Power-Pad MSOP Package
  • Designed Specifically to Work With Current-Limited Wall Supplies
  • Ideal for Low Dropout Charger Design for Single-Cell Li-Ion Packs With Coke or Graphite Anodes
  • Integrated PowerFET for 500 mA
  • Integrated Voltage Regulation With 0.5% Accuracy
  • Battery Insertion and Removal Detection
  • Charge Termination by Minimum Current and Time
  • Pre-Charge Conditioning With Safety Timer
  • Sleep Mode for Low-Power Consumption
  • Charge Status Output for LED or Host Processor Interface Indicates
  • Charge-in-Progress, Charge Completion, and Fault Conditions
  • Optional Temperature Monitoring Before and During Charge
  • Small, 8-Pin Power-Pad MSOP Package

The bq2420x series are simple Li-Ion linear charge management devices targeted at low-cost and space limited charger applications. The bq2420x series offer integrated powerFET, high-accuracy voltage regulation, temperature monitoring, charge status, and charge termination, in a single monolithic device.

The bq2420x is designed to work with a current-limited wall-mount transformer and therefore does not provide any current regulation. However, these devices offer a fixed internal current limit to prevent damage to the internal powerFET. A time-limited pre-conditioning phase is provided to condition deeply discharged cells. Once the battery reaches the charge voltage, the high accuracy voltage regulation loop takes over and completes the charge cycle. Charge is terminated based on minimum current. An internal charge timer provides a backup safety for charge termination.

Other standard features include an automatic sleep mode activated when VCC falls below the battery voltage falls below the VRCH threshold.

In addition to the standard features, the core product provides two additional enhancements: temperature monitoring and status display. The temperaturesense circuit continuously measures battery temperature using an external thermistor and inhibits charge until the battery temperature is within the user-defined thresholds. The STAT pin indicates three conditions of operation of the charger. These conditions are charge-in-progress, charge complete, and fault. This output can be used to drive an LED or an interface to a microcontroller.

The bq2420x series are simple Li-Ion linear charge management devices targeted at low-cost and space limited charger applications. The bq2420x series offer integrated powerFET, high-accuracy voltage regulation, temperature monitoring, charge status, and charge termination, in a single monolithic device.

The bq2420x is designed to work with a current-limited wall-mount transformer and therefore does not provide any current regulation. However, these devices offer a fixed internal current limit to prevent damage to the internal powerFET. A time-limited pre-conditioning phase is provided to condition deeply discharged cells. Once the battery reaches the charge voltage, the high accuracy voltage regulation loop takes over and completes the charge cycle. Charge is terminated based on minimum current. An internal charge timer provides a backup safety for charge termination.

Other standard features include an automatic sleep mode activated when VCC falls below the battery voltage falls below the VRCH threshold.

In addition to the standard features, the core product provides two additional enhancements: temperature monitoring and status display. The temperaturesense circuit continuously measures battery temperature using an external thermistor and inhibits charge until the battery temperature is within the user-defined thresholds. The STAT pin indicates three conditions of operation of the charger. These conditions are charge-in-progress, charge complete, and fault. This output can be used to drive an LED or an interface to a microcontroller.
open-in-new 尋找其它 電池充電器 IC
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet Single-Chip Li-Ion & Li_Pol Charge Mgmt IC for Current-Limited Application datasheet (Rev. C) 2008年 3月 19日
User guide bq2420x Single-Chip Li-Ion/Li-Pol Charge Management IC for Current-Limited Appli 2001年 12月 10日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發模組 (EVM) 的 GUI

SLVC024 — bq24715 EVM GUI Package

支援產品和硬體

支援產品和硬體

產品
電池充電器 IC
BQ2000 — 具有峰值電壓偵測終端器的切換式多化合物電池充電器 BQ2000T — 具有 dT/dt 終端的切換模式多化合物電池充電器 BQ2002 — 具有負 dV、PVT 和加滿時間設置 1 的鎳鎘/鎳氫電池充電控制器 BQ2002C — 具有負 dV、PVT 的鎳鎘/鎳氫電池充電控制器 BQ2002D — 具有 dT/dt 終端的切換模式鎳鎘/鎳氫電池控制器 BQ2002E — 具有負 dV、PVT 和 tMTO setup1 的鎳鎘/鎳氫電池充電控制器 BQ2002F — 具有負 dV、PVT 和加滿時間設置 2 的鎳鎘/鎳氫電池充電控制器 BQ2002G — 具有負 dV、PVT 和 tMTO 設定 2 的鎳鎘/鎳氫電池充電控制器 BQ2002T — 具有 dT/dt 終端和低溫故障的鎳鎘/鎳氫電池充電控制器 BQ2031 — 具有用戶可選充電演算法的切換模式鉛酸電池充電器 BQ2057C — 具有 AutoCompTM 4.2V 的低壓差線性 1 芯鋰離子電池充電控制器 BQ24010 — 採用 QFN-11 封裝，具有交流電和溫度感測的 1 芯、1A 線性鋰離子電池充電器 BQ24012 — 採用 QFN-12，具有 FET、交流電出現和充電賦能的 1 芯 1-A 線性鋰離子電池充電器 BQ24013 — 採用 QFN-11 封裝，具有充電賦能、充電終止賦能的 1 芯 1-A 線性鋰離子電池充電器 BQ24200 — 採用 MSOP-8 封裝且具溫度感測功能的 500-mA、4.2-V 鋰離子充電器，適用於電流限制應用 BQ24201 — 採用 MSOP-8 封裝且具溫度感測功能的 500-mA、4.1-V 鋰離子充電器，適用於電流限制應用 BQ24202 — 採用 MSOP-8 封裝、顯示充電狀態、適用於電流限制應用的 500-mA、4.2-V 鋰離子充電器 BQ24203 — 採用 MSOP-8 封裝、顯示充電狀態、適用於電流限制應用的 500-mA、4.1-V 鋰離子充電器 BQ24205 — 採用 MSOP-8 封裝、適用於電流限制應用的 500-mA、4.1-V 鋰離子充電器 BQ24715 — 具 N 通道功率 MOSFET 選擇器的 SMBus 2-3 芯 NVDC 降壓電池充電器控制器
軟體
支援軟體
TEMPSENSE-SW — 溫度感測設計工具軟體
下載
支援軟體

TEMPSENSE-SW — 溫度感測設計工具軟體

The TempSense Designer software allows the user to easily design temperature sensing circuits for many of the Texas Instruments battery charger devices. A full listing of the supported devices is included under the "Support" menu in the program. The user can use the thermisters included in the (...)
檢視選項
封裝 引腳 下載
HVSSOP (DGN) 8 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片