首頁 數據轉換器 數位轉類比轉換器 (DAC) 精密 DAC (≤10 MSPS)
首頁
數據轉換器
數位轉類比轉換器 (DAC)
精密 DAC (≤10 MSPS)

DAC81404

現行

具精確內部參考的四通道、16 位元高電壓輸出 DAC

立即訂購
產品規格表

DAC81404

現行
產品規格表 立即訂購

產品詳細資料

Resolution (Bits) 16 Number of DAC channels 4 Interface type SPI, Serial SPI Output type Buffered Voltage Settling time (µs) 6 Reference type Ext, Int Architecture R-2R Rating Catalog Output range (max) (mA/V) 40 Output range (min) (mA/V) -20 Operating temperature range (°C) -40 to 125
Resolution (Bits) 16 Number of DAC channels 4 Interface type SPI, Serial SPI Output type Buffered Voltage Settling time (µs) 6 Reference type Ext, Int Architecture R-2R Rating Catalog Output range (max) (mA/V) 40 Output range (min) (mA/V) -20 Operating temperature range (°C) -40 to 125
VQFN (RHB) 32 25 mm² 5 x 5
  • Performance:
    • Specified monotonic at 16-bit resolution
    • INL: ±1 LSB maximum at 16-bit resolution
    • TUE: ±0.05% FSR, maximum
  • Integrated output buffer
    • Full-scale output voltage: ±5 V, ±10 V, ±20 V, 5 V, 10 V, 20 V, 40 V
    • High drive capability: ±15 mA
    • Per channel sense pins
  • Integrated 2.5-V precision reference
    • Initial accuracy: ±2.5 mV, maximum
    • Low drift: 10 ppm/°C, maximum
  • Reliability features:
    • CRC error check
    • Short circuit limit
    • Fault pin
  • 50-MHz, SPI-compatible serial interface
    • 4-wire mode, 1.7-V to 5.5-V operation
    • Readback and daisy-chain operations
  • Temperature range: –40°C to +125°C
  • Package: 5-mm × 5-mm, 32-pin QFN
  • Performance:
    • Specified monotonic at 16-bit resolution
    • INL: ±1 LSB maximum at 16-bit resolution
    • TUE: ±0.05% FSR, maximum
  • Integrated output buffer
    • Full-scale output voltage: ±5 V, ±10 V, ±20 V, 5 V, 10 V, 20 V, 40 V
    • High drive capability: ±15 mA
    • Per channel sense pins
  • Integrated 2.5-V precision reference
    • Initial accuracy: ±2.5 mV, maximum
    • Low drift: 10 ppm/°C, maximum
  • Reliability features:
    • CRC error check
    • Short circuit limit
    • Fault pin
  • 50-MHz, SPI-compatible serial interface
    • 4-wire mode, 1.7-V to 5.5-V operation
    • Readback and daisy-chain operations
  • Temperature range: –40°C to +125°C
  • Package: 5-mm × 5-mm, 32-pin QFN

The 16-bit DAC81404 and 12-bit DAC61404 (DACx1404) are pin-compatible, quad-channel, buffered, high-voltage-output, digital-to-analog converters (DACs). These devices include a low-drift, 2.5-V internal reference that eliminates the need for an external precision reference in most applications. The devices are specified monotonic and provide high linearity of ±1 LSB INL. Additionally, the devices implement per channel sense pins to eliminate IR drops and sense up to ±12 V of ground bounce.

A user-selectable output configuration enables full-scale bipolar output voltages of ±20 V, ±10 V, and ±5 V; and full-scale unipolar output voltages of 40 V, 20 V, 10 V and 5 V. The full-scale output range for each DAC channel is independently programmable. The integrated DAC output buffers can sink or source up to 15 mA, thus limiting the need for additional operational amplifiers.

The DACx1404 incorporate a power-on-reset circuit that connects the DAC outputs to ground at power up. The outputs remain in this mode until the device is properly configured for operation. These devices include additional reliability features, such as a CRC error check, short-circuit protection, and a thermal alarm.

Communication to the devices is performed through a 4-wire serial interface that supports operation from 1.7 V to 5.5 V.

The 16-bit DAC81404 and 12-bit DAC61404 (DACx1404) are pin-compatible, quad-channel, buffered, high-voltage-output, digital-to-analog converters (DACs). These devices include a low-drift, 2.5-V internal reference that eliminates the need for an external precision reference in most applications. The devices are specified monotonic and provide high linearity of ±1 LSB INL. Additionally, the devices implement per channel sense pins to eliminate IR drops and sense up to ±12 V of ground bounce.

A user-selectable output configuration enables full-scale bipolar output voltages of ±20 V, ±10 V, and ±5 V; and full-scale unipolar output voltages of 40 V, 20 V, 10 V and 5 V. The full-scale output range for each DAC channel is independently programmable. The integrated DAC output buffers can sink or source up to 15 mA, thus limiting the need for additional operational amplifiers.

The DACx1404 incorporate a power-on-reset circuit that connects the DAC outputs to ground at power up. The outputs remain in this mode until the device is properly configured for operation. These devices include additional reliability features, such as a CRC error check, short-circuit protection, and a thermal alarm.

Communication to the devices is performed through a 4-wire serial interface that supports operation from 1.7 V to 5.5 V.
open-in-new 尋找其它 精密 DAC (≤10 MSPS)
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同，但引腳輸出與所比較的產品不同
DAC81402 現行 具精確內部參考的雙通道、16 位元高電壓輸出 DAC High-voltage, two-channel device

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4
類型 標題 日期
* Data sheet DACx1404 Quad, 16-Bit and 12-Bit, High-Voltage-Output DACs With Internal Reference datasheet (Rev. A) PDF | HTML 2021年 5月 18日
Application note Optimized Power-Supply Circuit Solution for DAC81416 High-Voltage Output PDF | HTML 2021年 9月 19日
Technical article 3 key specifications when using a DAC as a programmable voltage reference PDF | HTML 2021年 2月 19日
EVM User's guide BP-DAC81404EVM, BP-DAC61402EVM User's Guide 2020年 6月 30日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DAC81404EVM — DAC81404 evaluation module

The DAC81404 evaluation module (EVM) is an all-in-one development platform for the DACx1404 family. The 16-bit, 4-channel DAC81404 and 12-bit, 4-channel DAC61404 are a pin-compatible family of
quad-channel, buffered, high-voltage-output digital-to-analog converters (DACs) with an integrated 2.5V (...)

使用指南: PDF | HTML
TI.com 無法提供
驅動程式或資料庫

DACX14XX-PYTHON-FTDI-DRIVER — Example python driver for the DACx14xx family

This example python driver interfaces with the on board FTDI controller of the DACx14xx EVM ecosystem.
lock = 需要匯出核准 (1 分鐘)
支援產品和硬體

支援產品和硬體

產品
精密 DAC (≤10 MSPS)
DAC81401 — 具有精確內部參考的單通道、16 位元高電壓輸出 DAC DAC81402 — 具精確內部參考的雙通道、16 位元高電壓輸出 DAC DAC81404 — 具精確內部參考的四通道、16 位元高電壓輸出 DAC DAC61401 — 具有精確內部參考的單通道、12 位元高電壓輸出 DAC DAC61402 — 具精密內部參考的雙通道、12 位元、±20-V 範圍、緩衝輸出 DAC DAC61404 — 具有精密度內部參考的四通道、12 位元高電壓輸出 DAC
硬體開發
開發板
DAC81401EVM — DAC81401 評估模組 DAC81404EVM — DAC81404 evaluation module
下載選項
模擬型號

DAC61402 and DAC81404 IBIS Model

SLAM351.ZIP (89 KB) - IBIS Model
下載
計算工具

ANALOG-ENGINEER-CALC — 類比工程師計算機

The Analog Engineer’s Calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting op-amp gain with feedback (...)
檢視選項
設計工具

DAC814XXEVM-GUI — DAC814XXEVM GUI

This GUI interfaces with the on board controller of the DAC81401EVM to control the register settings on the DAC81401 and related devices in the device family.
lock = 需要匯出核准 (1 分鐘)
支援產品和硬體

支援產品和硬體

產品
精密 DAC (≤10 MSPS)
DAC81401 — 具有精確內部參考的單通道、16 位元高電壓輸出 DAC DAC61401 — 具有精確內部參考的單通道、12 位元高電壓輸出 DAC DAC81402 — 具精確內部參考的雙通道、16 位元高電壓輸出 DAC DAC61402 — 具精密內部參考的雙通道、12 位元、±20-V 範圍、緩衝輸出 DAC DAC81404 — 具精確內部參考的四通道、16 位元高電壓輸出 DAC DAC61404 — 具有精密度內部參考的四通道、12 位元高電壓輸出 DAC
硬體開發
開發板
DAC81401EVM — DAC81401 評估模組 DAC81404EVM — DAC81404 evaluation module
lock 下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
檢視選項
封裝 引腳 下載
VQFN (RHB) 32 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片