首頁 馬達驅動器 步進馬達驅動器
首頁
馬達驅動器
步進馬達驅動器

DRV8410

現行

具有電流調節功能的 1.65-V 至 11-V、2.5-A 雙全橋馬達驅動器

立即訂購
產品規格表

DRV8410

現行
產品規格表 立即訂購

產品詳細資料

Number of full bridges 2 Vs (min) (V) 1.65 Vs ABS (max) (V) 12 Full-scale current (A) 1.5 Peak output current (A) 2.5 RDS(ON) (HS + LS) (mΩ) 800 Sleep current (µA) 0.04 Control mode PWM Control interface Hardware (GPIO) Microstepping levels 2 Features Current Regulation Rating Catalog Operating temperature range (°C) -40 to 125
Number of full bridges 2 Vs (min) (V) 1.65 Vs ABS (max) (V) 12 Full-scale current (A) 1.5 Peak output current (A) 2.5 RDS(ON) (HS + LS) (mΩ) 800 Sleep current (µA) 0.04 Control mode PWM Control interface Hardware (GPIO) Microstepping levels 2 Features Current Regulation Rating Catalog Operating temperature range (°C) -40 to 125
HTSSOP (PWP) 16 32 mm² 5 x 6.4 WQFN (RTE) 16 9 mm² 3 x 3
  • Dual H-bridge motor driver, can drive -
    • One bipolar stepper motor
    • One or two brushed DC motors

    • Solenoids and other inductive loads

  • Low ON-resistance: HS + LS = 800 mΩ (Typical, 25°C)
  • Wide Power Supply Voltage Range
    • 1.65 to 11 V

  • Pin-to-pin compatible with -

  • High output current capability: 2.5-A Peak

  • PWM control interface

  • Supports 1.8-V, 3.3-V, and 5-V logic inputs
  • Integrated current regulation
  • Low-power sleep mode
    • ≤ 30 nA at V VM = 5 V, T J = 25°C

  • Small package and footprint

    • 16-pin HTSSOP with PowerPAD™, 5.0×4.4 mm

    • 16-pin Thin-SOT with PowerPAD™, 4.2×2.0 mm

    • 16-Pin WQFN with PowerPAD™, 3.0×3.0 mm

  • Integrated protection features
    • VM undervoltage lockout (UVLO)
    • Auto-retry overcurrent protection (OCP)
    • Thermal shutdown (TSD)

    • Fault Indication Pin (nFAULT)
  • Dual H-bridge motor driver, can drive -
    • One bipolar stepper motor
    • One or two brushed DC motors

    • Solenoids and other inductive loads

  • Low ON-resistance: HS + LS = 800 mΩ (Typical, 25°C)
  • Wide Power Supply Voltage Range
    • 1.65 to 11 V

  • Pin-to-pin compatible with -

  • High output current capability: 2.5-A Peak

  • PWM control interface

  • Supports 1.8-V, 3.3-V, and 5-V logic inputs
  • Integrated current regulation
  • Low-power sleep mode
    • ≤ 30 nA at V VM = 5 V, T J = 25°C

  • Small package and footprint

    • 16-pin HTSSOP with PowerPAD™, 5.0×4.4 mm

    • 16-pin Thin-SOT with PowerPAD™, 4.2×2.0 mm

    • 16-Pin WQFN with PowerPAD™, 3.0×3.0 mm

  • Integrated protection features
    • VM undervoltage lockout (UVLO)
    • Auto-retry overcurrent protection (OCP)
    • Thermal shutdown (TSD)

    • Fault Indication Pin (nFAULT)

The DRV8410 is a dual H-bridge motor driver that can drive one or two DC brush motors, one stepper motor, solenoids, or other inductive loads. The tripler charge pump allows the device to operate down to 1.65 V to accommodate 1.8-V supply rails and low-battery conditions. The charge pump integrates all capacitors and allows for 100% duty cycle operation. The inputs and outputs can be paralleled to drive high current brush DC motors with half the R DS(ON).

The device implements current regulation by comparing an internal refernce voltage to the voltage on the xISEN pins, which is proportional to motor current through an external sense resistor. The ability to limit current can significantly reduce large currents during motor startup and stall conditions.

A low-power sleep mode achieves ultra-low quiescent current draw by shutting down most of the internal circuitry. Internal protection features include undervoltage, overcurrent, and overtemperature.

The DRV8410 is part of a family of devices which come in pin-to-pin, scalable R DS(ON) options to support various loads with minimal design changes. See for information on the devices in this family. View our full portfolio of brushed motor drivers on ti.com.

The DRV8410 is a dual H-bridge motor driver that can drive one or two DC brush motors, one stepper motor, solenoids, or other inductive loads. The tripler charge pump allows the device to operate down to 1.65 V to accommodate 1.8-V supply rails and low-battery conditions. The charge pump integrates all capacitors and allows for 100% duty cycle operation. The inputs and outputs can be paralleled to drive high current brush DC motors with half the R DS(ON).

The device implements current regulation by comparing an internal refernce voltage to the voltage on the xISEN pins, which is proportional to motor current through an external sense resistor. The ability to limit current can significantly reduce large currents during motor startup and stall conditions.

A low-power sleep mode achieves ultra-low quiescent current draw by shutting down most of the internal circuitry. Internal protection features include undervoltage, overcurrent, and overtemperature.

The DRV8410 is part of a family of devices which come in pin-to-pin, scalable R DS(ON) options to support various loads with minimal design changes. See for information on the devices in this family. View our full portfolio of brushed motor drivers on ti.com.
open-in-new 尋找其它 步進馬達驅動器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
具備升級功能，可直接投入使用替代所比較的產品
DRV8411A 現行 具有 IPROPI 電流調節功能的 1.65-V 至 11-V、4-A 雙全橋馬達驅動器 Lower Rdson with higher output current and IPROPI current regulation
引腳對引腳的功能與所比較的產品相同
DRV8411 現行 具有電流調節功能的 1.65-V 至 11-V、4-A 雙全橋馬達驅動器 Lower Rdson and higher output current

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4
類型 標題 日期
* Data sheet DRV8410 Dual H-Bridge Motor Driver with Current Regulation datasheet (Rev. B) PDF | HTML 2023年 6月 7日
Product overview Brushed and Stepper Motor Drivers in Video Surveillance PDF | HTML 2024年 2月 22日
Certificate DRV8410EVM EU RoHS Declaration of Conformity (DoC) 2022年 8月 19日
User guide DRV8410 EVM User's Guide PDF | HTML 2022年 2月 2日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DRV8410EVM — 具有電流調節功能的 DRV8410 雙全橋馬達驅動器評估模組

DRV8410 評估模組 (EVM) 讓設計人員可評估 DRV8410 雙全橋驅動器。 EVM包括 MCU 及圖形使用者介面 (GUI)，可輕鬆控制馬達驅動器。EVM 隨附所有必要的工具和軟體，可立即開始轉動馬達，並加快馬達驅動器評估速度。

使用指南: PDF | HTML
TI.com 無法提供
韌體

DRV841XEVM-FIRMWARE — Firmware source code for the DRV8410EVM, DRV8411EVM, and DRV8411AEVM

Zipped folder containing manifest and firmware source code for the evaluation modules of the DRV841x family of devices.
支援產品和硬體

支援產品和硬體

產品
步進馬達驅動器
DRV8411A — 具有 IPROPI 電流調節功能的 1.65-V 至 11-V、4-A 雙全橋馬達驅動器 DRV8410 — 具有電流調節功能的 1.65-V 至 11-V、2.5-A 雙全橋馬達驅動器 DRV8411 — 具有電流調節功能的 1.65-V 至 11-V、4-A 雙全橋馬達驅動器
硬體開發
開發板
DRV8410EVM — 具有電流調節功能的 DRV8410 雙全橋馬達驅動器評估模組 DRV8411EVM — 具有電流調節功能的 DRV8411 雙全橋馬達驅動器評估模組 DRV8411AEVM — 具有電流調節功能的雙全橋馬達驅動器 DRV8411A 評估模組
下載選項
開發模組 (EVM) 的 GUI

DRV841XEVM-GUI — GUI installer for the DRV8410EVM, DRV8411EVM, and DRV8411AEVM

Zipped folder containing manifests and GUI installer for DRV841x family of devices.
支援產品和硬體

支援產品和硬體

產品
步進馬達驅動器
DRV8410 — 具有電流調節功能的 1.65-V 至 11-V、2.5-A 雙全橋馬達驅動器 DRV8411 — 具有電流調節功能的 1.65-V 至 11-V、4-A 雙全橋馬達驅動器 DRV8411A — 具有 IPROPI 電流調節功能的 1.65-V 至 11-V、4-A 雙全橋馬達驅動器
硬體開發
開發板
DRV8410EVM — 具有電流調節功能的 DRV8410 雙全橋馬達驅動器評估模組 DRV8411EVM — 具有電流調節功能的 DRV8411 雙全橋馬達驅動器評估模組 DRV8411AEVM — 具有電流調節功能的雙全橋馬達驅動器 DRV8411A 評估模組
啟動 下載選項
封裝 引腳 下載
HTSSOP (PWP) 16 檢視選項
WQFN (RTE) 16 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片