首頁 感測器 溫度感測器 數位溫度感測器
首頁
感測器
溫度感測器
數位溫度感測器

LM93

現行

具硬體監控器和 16 個電源電壓監控器的 2 個遠端、1 個本機溫度感測器

立即訂購
產品規格表

LM93

現行
產品規格表 立即訂購

產品詳細資料

Local sensor accuracy (max) 3 Type Fan Controller Operating temperature range (°C) 0 to 85 Supply voltage (min) (V) 3 Interface type I2C, SMBus Supply voltage (max) (V) 3.6 Features PWM output, Tachometer Supply current (max) (µA) 900 Temp resolution (max) (Bits) 8 Remote channels (#) 2 Addresses 3 Rating Catalog
Local sensor accuracy (max) 3 Type Fan Controller Operating temperature range (°C) 0 to 85 Supply voltage (min) (V) 3 Interface type I2C, SMBus Supply voltage (max) (V) 3.6 Features PWM output, Tachometer Supply current (max) (µA) 900 Temp resolution (max) (Bits) 8 Remote channels (#) 2 Addresses 3 Rating Catalog
TSSOP (DGG) 56 113.4 mm² 14 x 8.1
  • 8-bit ΣΔ ADC
  • Monitors 16 Power Supplies
  • Monitors 2 Remote Thermal Diodes
  • Internal Ambient Temperature Sensing
  • Programmable Autonomous Fan Control Based on Temperature Readings with Fan Boost Support
  • Fan Control Based on 13-step Lookup Table
  • Temperature Reading Digital Filter
  • 1.0°C Digital Temperature Sensor Resolution
  • 0.5°C Temperature Resolution for Fan Control
  • 2 PWM Fan Speed Control Outputs
  • 4 Fan Tachometer Inputs
  • Dual Processor Thermal Throttling (PROCHOT) Monitoring
  • Dual Dynamic VID Monitoring (6 VIDs per Processor)
  • 8 General Purpose I/Os:
    • 4 Can be Configured as Fan Tachometer Inputs
    • 2 Can be Configured to Connect to THERMTRIP from a Processor
    • 2 are Standard GPIOs that Could be Used to Monitor IERR Signal
  • 2 General Purpose Inputs that Can be Used to Monitor SCSI Termination Signals
  • Limit Register Comparisons of All Monitored Values
  • 2-wire, SMBus 2.0 Compliant, Serial Digital Interface
    • Supports Byte/block Read and Write
    • Configurable Slave Address (Tri-level Pin Selects 1 of 3 Possible Addresses)
  • 2.5V Reference Voltage Output
  • 56-pin TSSOP Package
  • XOR-tree Test Mode
  • Key Specifications
    • Voltage Measurement Accuracy ±2% FS (max)
    • Resolution 8-bits, 1°C
    • Temperature Sensor Accuracy ±3°C (max)
    • Temperature Range:LM93 Operational 0°C to +85°CRemote Temp Accuracy 0°C to +125°C
    • Power Supply Voltage +3.0V to +3.6V
    • Power Supply Current 0.9 mA

All trademarks are the property of their respective owners.

  • 8-bit ΣΔ ADC
  • Monitors 16 Power Supplies
  • Monitors 2 Remote Thermal Diodes
  • Internal Ambient Temperature Sensing
  • Programmable Autonomous Fan Control Based on Temperature Readings with Fan Boost Support
  • Fan Control Based on 13-step Lookup Table
  • Temperature Reading Digital Filter
  • 1.0°C Digital Temperature Sensor Resolution
  • 0.5°C Temperature Resolution for Fan Control
  • 2 PWM Fan Speed Control Outputs
  • 4 Fan Tachometer Inputs
  • Dual Processor Thermal Throttling (PROCHOT) Monitoring
  • Dual Dynamic VID Monitoring (6 VIDs per Processor)
  • 8 General Purpose I/Os:
    • 4 Can be Configured as Fan Tachometer Inputs
    • 2 Can be Configured to Connect to THERMTRIP from a Processor
    • 2 are Standard GPIOs that Could be Used to Monitor IERR Signal
  • 2 General Purpose Inputs that Can be Used to Monitor SCSI Termination Signals
  • Limit Register Comparisons of All Monitored Values
  • 2-wire, SMBus 2.0 Compliant, Serial Digital Interface
    • Supports Byte/block Read and Write
    • Configurable Slave Address (Tri-level Pin Selects 1 of 3 Possible Addresses)
  • 2.5V Reference Voltage Output
  • 56-pin TSSOP Package
  • XOR-tree Test Mode
  • Key Specifications
    • Voltage Measurement Accuracy ±2% FS (max)
    • Resolution 8-bits, 1°C
    • Temperature Sensor Accuracy ±3°C (max)
    • Temperature Range:LM93 Operational 0°C to +85°CRemote Temp Accuracy 0°C to +125°C
    • Power Supply Voltage +3.0V to +3.6V
    • Power Supply Current 0.9 mA

All trademarks are the property of their respective owners.

The LM93, hardware monitor, has a two wire digital interface compatible with SMBus 2.0. Using an 8-bit ΣΔ ADC, the LM93 measures the temperature of two remote diode connected transistors as well as its own die and 16 power supply voltages.

To set fan speed, the LM93 has two PWM outputs that are each controlled by up to four temperature zones. The fan-control algorithm is lookup table based. The LM93 includes a digital filter that can be invoked to smooth temperature readings for better control of fan speed. The LM93 has four tachometer inputs to measure fan speed. Limit and status registers for all measured values are included.

The LM93 builds upon the functionality of previous motherboard management ASICs and uses some of the LM85's features (i.e. smart tachometer mode). It also adds measurement and control support for dynamic Vccp monitoring and PROCHOT. It is designed to monitor a dual processor Xeon class motherboard with a minimum of external components.

The LM93, hardware monitor, has a two wire digital interface compatible with SMBus 2.0. Using an 8-bit ΣΔ ADC, the LM93 measures the temperature of two remote diode connected transistors as well as its own die and 16 power supply voltages.

To set fan speed, the LM93 has two PWM outputs that are each controlled by up to four temperature zones. The fan-control algorithm is lookup table based. The LM93 includes a digital filter that can be invoked to smooth temperature readings for better control of fan speed. The LM93 has four tachometer inputs to measure fan speed. Limit and status registers for all measured values are included.

The LM93 builds upon the functionality of previous motherboard management ASICs and uses some of the LM85's features (i.e. smart tachometer mode). It also adds measurement and control support for dynamic Vccp monitoring and PROCHOT. It is designed to monitor a dual processor Xeon class motherboard with a minimum of external components.

open-in-new 尋找其它 數位溫度感測器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet LM93 Hardware Monitor with Integrated Fan Control for Server Management datasheet (Rev. E) 2013年 3月 27日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

驅動程式或資料庫

LM93SW-LINUX — 適用於 LM93 的 Linux 驅動程式

The Linux driver supports the LM93 series of Hardware Monitors. The Linux driver supports communication through the I2C bus and interfaces with the Hardware Monitoring sub-system.
Linux Mainline Status

Available in Linux Main line: Yes
Available through git.ti.com: N/A

Supported Devices:
  • lm93
  • lm94
Linux (...)
檢視選項
支援軟體

DIGITALTEMPSENSORSEVM-SW — Eval Board Software for Hardware Monitors and Digital Temp Sensors

Evaluation Board Software for Hardware Monitors and Digital Temperature Sensors
支援產品和硬體

支援產品和硬體

產品
數位溫度感測器
LM63 — 具風扇控制的 1 個遠端與本機溫度感測器 LM64 — 具風扇控制與 5 個 GPIO 的 1 個遠端與本機溫度感測器 LM71 — 具 SPI 介面的 ±1.5°C 溫度感測器 LM71-Q1 — 具 SPI 介面的汽車級、±1.5°C 溫度感測器 LM73 — 具 I2C/SMBus 介面的 ±1°C 溫度感測器 LM86 — 具 SMBu 介面的 ±0.75°C 遠端和本機溫度感測器 LM89 — 具 SMBus 介面和 2 個匯流排分載位址的 ± 0.75 ° C 遠端和本機溫度感測器 LM90 — 具 SMBus 介面的遠端和本機溫度感測器 LM93 — 具硬體監控器和 16 個電源電壓監控器的 2 個遠端、1 個本機溫度感測器 LM95010 — 具 SensorPath 介面的 ±2°C 溫度感測器 LM95071 — 具 SPI 介面的 ±1°C 溫度感測器 LM95221 — 具 beta 補償和 SMBus、I2C 介面的 ±3°C 雙遠端和本機溫度感測器 LM95231 — 具 TruTherm™ 技術和 SMBus 介面的雙遠端和本機溫度感測器 LM95235 — 具 SMBus、beta 補償且適用 65/90nm 二極體的 ±0.75°C 遠端和本機溫度感測器 LM95235-Q1 — 具 TruTherm™ 技術和 SMBus 的汽車級 ±2°C 遠端和本機溫度感測器 LM96000 — 具風扇控制和 6 個電源電壓監控器的硬體監控器 LM96080 — 具風扇速度和電源電壓監控器的 1 個本機溫度感測器 LM96163 — 具 beta 補償和風扇控制的 1 個遠端與本機溫度感測器 LM99 — 具 TruTherm™ 技術和 SMBus 介面的遠端和本機溫度感測器
下載
支援軟體

SENSOREVAL — Eval Board Software For Hardware Monitors And Digital Temperature Sensors

SensorEval
SensorEval software supports the latest TI temperature sensor and hardware monitor evaluation boards via USB interface. It also allows access to sensors mounted directly on motherboards that support Intel chip sets.

  • Download SensorEval Software and Manual
  • Windows XP support is offered for (...)
支援產品和硬體

支援產品和硬體

產品
數位溫度感測器
LM63 — 具風扇控制的 1 個遠端與本機溫度感測器 LM64 — 具風扇控制與 5 個 GPIO 的 1 個遠端與本機溫度感測器 LM71 — 具 SPI 介面的 ±1.5°C 溫度感測器 LM71-Q1 — 具 SPI 介面的汽車級、±1.5°C 溫度感測器 LM73 — 具 I2C/SMBus 介面的 ±1°C 溫度感測器 LM75A — 2C 業界標準溫度感測器、I2C/SMBus 介面 LM86 — 具 SMBu 介面的 ±0.75°C 遠端和本機溫度感測器 LM89 — 具 SMBus 介面和 2 個匯流排分載位址的 ± 0.75 ° C 遠端和本機溫度感測器 LM90 — 具 SMBus 介面的遠端和本機溫度感測器 LM93 — 具硬體監控器和 16 個電源電壓監控器的 2 個遠端、1 個本機溫度感測器 LM95010 — 具 SensorPath 介面的 ±2°C 溫度感測器 LM95071 — 具 SPI 介面的 ±1°C 溫度感測器 LM95172-Q1 — 具 200°C 功能和 SPI 介面的汽車級 ±1°C 溫度感測器 LM95214 — 具 SMBus 介面的 ±2°C 四遠端和本機溫度感測器 LM95221 — 具 beta 補償和 SMBus、I2C 介面的 ±3°C 雙遠端和本機溫度感測器 LM95231 — 具 TruTherm™ 技術和 SMBus 介面的雙遠端和本機溫度感測器 LM95233 — 具 TruTherm™ 技術和 SMBus 介面的 ±2°C 雙遠端和本機溫度感測器 LM95234 — 具 TruTherm™ 技術和 SMBus 介面的 ±2°C 雙遠端和本機溫度感測器 LM95235 — 具 SMBus、beta 補償且適用 65/90nm 二極體的 ±0.75°C 遠端和本機溫度感測器 LM95235-Q1 — 具 TruTherm™ 技術和 SMBus 的汽車級 ±2°C 遠端和本機溫度感測器 LM95241 — 具 beta 補償和 SMBus、I2C 介面的 ±1.25°C 雙遠端和本機溫度感測器 LM95245 — 具 SMBus、beta 補償且適用 45nm 二極體的 ±0.75°C 遠端和本機溫度感測器 LM96000 — 具風扇控制和 6 個電源電壓監控器的硬體監控器 LM96080 — 具風扇速度和電源電壓監控器的 1 個本機溫度感測器 LM96163 — 具 beta 補償和風扇控制的 1 個遠端與本機溫度感測器 LM99 — 具 TruTherm™ 技術和 SMBus 介面的遠端和本機溫度感測器
精確 ADC
ADC128D818 — 具溫度感測器、內部/外部電壓參考和 I2C 介面的 12 位元 82SPS 8 通道 ΔΣ ADC
下載
模擬型號

LM93 IBIS Model

SNAM023.ZIP (5 KB) - IBIS Model
下載
封裝 引腳 下載
TSSOP (DGG) 56 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片