OPA2365
- Gain bandwidth: 50 MHz
- Zerø-crossover distortion topology:
- Excellent THD+N: 0.0004%
- CMRR: 100 dB (minimum)
- Rail-to-rail input and output
- Input 100 mV beyond supply rail
- Low noise: 4.5 nV/√ Hz at 100 kHz
- Slew rate: 25 V/µs
- Fast settling: 0.3 µs to 0.01%
- Precision:
- Low offset: 100 µV
- Low input bias current: 0.2 pA
- 2.2-V to 5.5-V operation
The OPA365 and OPA2365 (OPAx365) zerø-crossover series, rail-to-rail, high-performance, CMOS operational amplifiers are optimized for very low voltage, single-supply applications. Rail-to-rail input or output, low-noise (4.5 nV/√ Hz), and high-speed operation (50-MHz gain bandwidth) make these devices an excellent choice for driving sampling analog-to-digital converters (ADCs). Applications include audio, signal conditioning, and sensor amplification.
Special features include an excellent common-mode rejection ratio (CMRR), no input stage crossover distortion, high input impedance, and rail-to-rail input and output swing. The input common-mode range includes both the negative and positive supplies. The output voltage swing is within 10 mV of the rails.
The OPA365 (single version) is available in the micro-size SOT23-5 (SOT-5) and SOIC-8 packages. The OPA2365 (dual version) is offered in the SOIC-8 package. All versions are specified for operation from −40°C to +125°C. Single and dual versions have identical specifications for maximum design flexibility.
查明 TI.com 庫存中的相似產品
規格相似的產品依可用的 TI.com 庫存排序。即刻查看
您可能會感興趣的類似產品
引腳對引腳的功能與所比較的產品相同
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | OPAx365 50-MHz, Zerø-Crossover, Low-Distortion, High-CMRR, RRI/O, Single-Supply Operational Amplifiers datasheet (Rev. G) | PDF | HTML | 2023年 5月 17日 |
Application brief | Increase Measurement Accuracy With HS Amps for Low-Side Shunt Current Monitoring (Rev. A) | 2019年 8月 26日 | ||
Circuit design | PWM generator circuit (Rev. A) | PDF | HTML | 2019年 2月 1日 | |
E-book | The Signal e-book: A compendium of blog posts on op amp design topics | 2017年 3月 28日 | ||
Technical article | Designing an EMC-compliant interface to motor position encoders – Part 5 | PDF | HTML | 2015年 11月 10日 |
設計與開發
請透過電腦查看設計與開發部分。訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
- 晶圓廠位置
- 組裝地點