ADS9218
- High-speed and low-power:
- ADS9219: 20MSPS/ch, 172mW/ch
- ADS9218: 10MSPS/ch, 140mW/ch
- ADS9217: 5MSPS/ch, 90mW/ch
- 2-channel, simultaneous sampling
- Feature integration:
- Integrated ADC driver
- Integrated precision reference
- Common-mode voltage output buffer
- High performance:
- 18-bit no-missing-codes
- INL: ±1LSB, DNL: ±0.75LSB
- SNR: 95.5dB and 104.5dB SNR with OSR = 16
- Wide input bandwidth:
- ADS9219: 135MHz (–3dB)
- ADS9218: 90MHz (–3dB)
- ADS9217: 45MHz (–3dB)
- Serial LVDS interface:
- SDR and DDR output modes
- Synchronous clock and data output
- Extended operating range: –40°C to +125°C
The ADS921x is a family of 18-bit, high-speed, dual-channel, simultaneous-sampling, analog-to-digital converters (ADCs) with an integrated driver for the ADC inputs. The integrated ADC driver simplifies the signal chain, reduces power consumption for precision applications, and supports high-frequency signals beyond 1MHz. By not requiring an external decoupling capacitor, the integrated ADC reference buffer is optimized for wide bandwidth applications.
The ADS921x uses a serial LVDS (SLVDS) data interface that enables high-speed digital communication while minimizing digital switching noise. Read the dual-channel ADC data using separate SLVDS outputs per ADC channel or one SLVDS output for both ADC channels.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | ADS921x Dual, Simultaneous-Sampling, 18-Bit, 20MSPS SAR ADC With Fully Differential ADC Input Driver datasheet (Rev. A) | PDF | HTML | 2024年 4月 26日 |
Technical article | Higher precision ADCs to monitor automated testers and encoders | PDF | HTML | 2024年 5月 3日 | |
Product overview | Precision ADCs for Motor Encoders and Position Sensing | PDF | HTML | 2023年 3月 27日 | |
Application brief | Low Latency Signal-Chain for Measurement Unit in Digital Control Loop | PDF | HTML | 2023年 2月 22日 | |
Circuit design | ADS9218 Power-Optimized Signal Chain Circuit | PDF | HTML | 2022年 10月 21日 | |
Application note | Simplify Antialiasing Filters With ADS9218 | PDF | HTML | 2022年 10月 21日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
ADS9218EVM-PDK — 適用於二通道同時取樣 18 位元 10-MSPS SAR ADC 的 ADS9218 性能示範套件
ADS9218 評估模組 (EVM) 性能示範套件 (PDK) 是用於評估 ADS9218 的平台,其為具備全差動輸入驅動器的二通道 18 位元、10-MSPS (每一通道) 類比轉數位轉換器 (ADC)。
ADS9218EVM-PDK 包含一個允許連接至標準現場可編程邏輯閘陣列 (FPGA) 開發板的中介板。搭配 TSWDC155EVM (另售) 使用的軟體可讓使用者透過通用序列匯流排 (USB) 與 ADC 通訊,擷取資料與執行資料分析。
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)
支援產品和硬體
產品
精密度運算放大器 (Vos<1mV)
一般用途運算放大器
音訊運算放大器
轉阻放大器
高速運算放大器 (GBW ≥ 50 MHz)
功率運算放大器
視訊放大器
線路驅動器
轉導放大器與雷射驅動器
全差分放大器
精確 ADC
生物感測 AFE
高速 ADC (≥10 MSPS)
接收器
觸控式螢幕控制器
差分放大器
儀器放大器
音訊線路接收器
類比電流感測放大器
數位電源監測器
配備整合式分流電阻器的類比電流感測放大器
具整合式分流電阻器的數位電源監測器
晶粒與晶圓服務
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
TINA-TI — 基於 SPICE 的類比模擬程式
封裝 | 引腳 | 下載 |
---|---|---|
VQFN (RHA) | 40 | 檢視選項 |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
- 晶圓廠位置
- 組裝地點