SM320DM642-HIREL

Name: SM320DM642-HIREL
Brand: TI
SKU: SM320DM642-HIREL
Price: 69.663 USD

最後一次購買

高可靠性產品數位媒體 DM642 DSP

立即訂購

產品規格表

document-pdfAcrobat Video/Imaging Point Digital Signal Processor datasheet (Rev. A) (英文)

SM320DM642-HIREL

最後一次購買

產品規格表

立即訂購

產品詳細資料

DSP type

1 C64x

DSP (max) (MHz)

720

CPU

32-/64-bit

Ethernet MAC

10/100

Rating

Military

Operating temperature range (°C)

-40 to 105

DSP type

1 C64x

DSP (max) (MHz)

720

CPU

32-/64-bit

Ethernet MAC

10/100

Rating

Military

Operating temperature range (°C)

-40 to 105

OMFCBGA (ZDK)

548

529 mm² 23 x 23

Controlled Baseline
- One Assembly/Test/Fabrication Site
Enhanced Diminishing Manufacturing Sources (DMS) Support
Enhanced Product-Change Notification
Qualification Pedigree⁽¹⁾
High-Performance Digital Media Processor
- 2 ns, 1.67 ns, 1.39 ns Instruction Cycle Time
- 720 MHz Clock Rate (500/600 MHz devices are product preview only)
- Eight 32-Bit Instructions/Cycle
- 5760 MIPS
- Fully Software-Compatible With C64x™
VelociTI.2™ Extensions to VelociTI™
Advanced Very Long Instruction Word (VLIW) TMS320C64x™ DSP Core
- Eight Highly Independent Functional Units With VelociTI.2™ Extensions:
  - Six ALUs (32/40 Bit), Each Supports Single 32 Bit, Dual 16 Bit,
    or Quad 8 Bit Arithmetic per Clock Cycle
  - Two Multipliers Support Four 16 × 16-Bit Multiplies (32 Bit Results) per
    Clock Cycle or Eight 8 × 8 Bit Multiplies (16 Bit Results) per Clock Cycle
- Load-Store Architecture With Non-Aligned Support
- 64 32-Bit General-Purpose Registers
- Instruction Packing Reduces Code Size
- All Instructions Conditional
Instruction Set Features
- Byte Addressable (8/16/32/64 Bit Data)
- 8-Bit Overflow Protection
- Bit Field Extract, Set, Clear
- Normalization, Saturation, Bit-Counting
- VelociTI.2™ Increased Orthogonality
L1/L2 Memory Architecture
- 128K Bit (16K Byte) L1P Program Cache (Direct Mapped)
- 128K Bit (16K Byte) L1D Data Cache (2-Way Set-Associative)
- 2M Bit (256K Byte) L2 Unified Mapped RAM/Cache (Flexible RAM/Cache
  Allocation)
Endianess: Little Endian, Big Endian
- 64 Bit External Memory Interface (EMIF)
- Glueless Interface to Asynchronous
  Memories (SRAM and EPROM) and
  Synchronous Memories (SDRAM, SBSRAM, ZBT SRAM, and FIFO)
1024M-Byte Total Addressable External Memory Space
Enhanced Direct-Memory-Access (EDMA)
Controller (64 Independent Channels)
10/100 Mbps Ethernet MAC (EMAC)
- IEEE 802.3 Compliant
- Media Independent Interface (MII)
- Eight Independent Transmit (TX) Channels and
  One Receive (RX) Channel
Management Data Input/Output (MDIO)
Three Configurable Video Ports
- Provide a Glueless I/F to Common Video Decoder and Encoder Devices
- Supports Multiple Resolutions/Video Stds
VCXO Interpolated Control Port (VIC)
- Supports Audio/Video Synchronization
Host Port Interface (HPI) [32/16 Bit]
32 Bit/66 MHz, 3.3-V Peripheral Component
Interconnect (PCI) Master/Slave Interface
Conforms to PCI Specification 2.2
Multichannel Audio Serial Port (McASP)
- Eight Serial Data Pins
- Wide Variety of I²S and Similar Bit Stream Format
- Integrated Digital Audio I/F Transmitter Supports S/PDIF,
  IEC60958-1, AES-3, CP-430 Formats
Inter-Integrated Circuit (I²C Bus™)
Two Multichannel Buffered Serial Ports (McBSPs)
Three 32 Bit General Purpose Timers
Sixteen General Purpose I/O (GPIO) Pins
Flexible PLL Clock Generator
IEEE-1149.1 (JTAG) Boundary-Scan-Compatible
548 Pin Ball Grid Array (BGA) Package, 0.8 mm Ball Pitch
0.13 µm/6 Level Cu Metal Process (CMOS)
3.3 V I/O, 1.4 V Internal (A-500, A-600, -600, -720)

⁽¹⁾ Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.
C64x, VelociTI.2, VelociTI, TMS320C64x, C6000, TMS320C6000, DM64x, C62x, TMS320C62x, TMS320C67x, Code Composer Studio, DSP/BIOS, XDS, TMS320 are trademarks of Texas Instruments.
All other trademarks are the property of their respective owners.

Controlled Baseline
- One Assembly/Test/Fabrication Site
Enhanced Diminishing Manufacturing Sources (DMS) Support
Enhanced Product-Change Notification
Qualification Pedigree⁽¹⁾
High-Performance Digital Media Processor
- 2 ns, 1.67 ns, 1.39 ns Instruction Cycle Time
- 720 MHz Clock Rate (500/600 MHz devices are product preview only)
- Eight 32-Bit Instructions/Cycle
- 5760 MIPS
- Fully Software-Compatible With C64x™
VelociTI.2™ Extensions to VelociTI™
Advanced Very Long Instruction Word (VLIW) TMS320C64x™ DSP Core
- Eight Highly Independent Functional Units With VelociTI.2™ Extensions:
  - Six ALUs (32/40 Bit), Each Supports Single 32 Bit, Dual 16 Bit,
    or Quad 8 Bit Arithmetic per Clock Cycle
  - Two Multipliers Support Four 16 × 16-Bit Multiplies (32 Bit Results) per
    Clock Cycle or Eight 8 × 8 Bit Multiplies (16 Bit Results) per Clock Cycle
- Load-Store Architecture With Non-Aligned Support
- 64 32-Bit General-Purpose Registers
- Instruction Packing Reduces Code Size
- All Instructions Conditional
Instruction Set Features
- Byte Addressable (8/16/32/64 Bit Data)
- 8-Bit Overflow Protection
- Bit Field Extract, Set, Clear
- Normalization, Saturation, Bit-Counting
- VelociTI.2™ Increased Orthogonality
L1/L2 Memory Architecture
- 128K Bit (16K Byte) L1P Program Cache (Direct Mapped)
- 128K Bit (16K Byte) L1D Data Cache (2-Way Set-Associative)
- 2M Bit (256K Byte) L2 Unified Mapped RAM/Cache (Flexible RAM/Cache
  Allocation)
Endianess: Little Endian, Big Endian
- 64 Bit External Memory Interface (EMIF)
- Glueless Interface to Asynchronous
  Memories (SRAM and EPROM) and
  Synchronous Memories (SDRAM, SBSRAM, ZBT SRAM, and FIFO)
1024M-Byte Total Addressable External Memory Space
Enhanced Direct-Memory-Access (EDMA)
Controller (64 Independent Channels)
10/100 Mbps Ethernet MAC (EMAC)
- IEEE 802.3 Compliant
- Media Independent Interface (MII)
- Eight Independent Transmit (TX) Channels and
  One Receive (RX) Channel
Management Data Input/Output (MDIO)
Three Configurable Video Ports
- Provide a Glueless I/F to Common Video Decoder and Encoder Devices
- Supports Multiple Resolutions/Video Stds
VCXO Interpolated Control Port (VIC)
- Supports Audio/Video Synchronization
Host Port Interface (HPI) [32/16 Bit]
32 Bit/66 MHz, 3.3-V Peripheral Component
Interconnect (PCI) Master/Slave Interface
Conforms to PCI Specification 2.2
Multichannel Audio Serial Port (McASP)
- Eight Serial Data Pins
- Wide Variety of I²S and Similar Bit Stream Format
- Integrated Digital Audio I/F Transmitter Supports S/PDIF,
  IEC60958-1, AES-3, CP-430 Formats
Inter-Integrated Circuit (I²C Bus™)
Two Multichannel Buffered Serial Ports (McBSPs)
Three 32 Bit General Purpose Timers
Sixteen General Purpose I/O (GPIO) Pins
Flexible PLL Clock Generator
IEEE-1149.1 (JTAG) Boundary-Scan-Compatible
548 Pin Ball Grid Array (BGA) Package, 0.8 mm Ball Pitch
0.13 µm/6 Level Cu Metal Process (CMOS)
3.3 V I/O, 1.4 V Internal (A-500, A-600, -600, -720)

⁽¹⁾ Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.
C64x, VelociTI.2, VelociTI, TMS320C64x, C6000, TMS320C6000, DM64x, C62x, TMS320C62x, TMS320C67x, Code Composer Studio, DSP/BIOS, XDS, TMS320 are trademarks of Texas Instruments.
All other trademarks are the property of their respective owners.

The C64x™ DSPs (including the SM320DM642-EP device) are the highest-performance fixed-point DSP generation in the C6000 DSP platform. The DM642 device is based on the second-generation high-performance, advanced VelociTI™ very-long-instruction-word (VLIW) architecture (VelociTI.2™) developed by Texas Instruments (TI), making these DSPs an excellent choice for digital media applications. The C64x is a code-compatible member of the C6000 DSP platform.

With performance of up to 5760 million instructions per second (MIPS) at a clock rate of 720 MHz, the DM642 device offers cost-effective solutions to high-performance DSP programming challenges. The DM642 DSP possesses the operational flexibility of high-speed controllers and the numerical capability of array processors. The C64x™ DSP core processor has 64 general-purpose registers of 32-bit word length and eight highly independent functional units—two multipliers for a 32-bit result and six arithmetic logic units (ALUs)—with VelociTI.2™ extensions. The VelociTI.2 extensions in the eight functional units include new instructions to accelerate the performance in video and imaging applications and extend the parallelism of the VelociTI™ architecture. The DM642 can produce four 16-bit multiply-accumulates (MACs) per cycle for a total of 2880 million MACs per second (MMACS), or eight 8-bit MACs per cycle for a total of 5760 MMACS. The DM642 DSP also has application-specific hardware logic, on-chip memory, and additional on-chip peripherals similar to the other C6000 DSP platform devices.

The DM642 uses a two-level cache-based architecture and has a powerful and diverse set of peripherals. The Level 1 program cache (L1P) is a 128-Kbit direct mapped cache and the Level 1 data cache (L1D) is a 128-Kbit 2-way set-associative cache. The Level 2 memory/cache (L2) consists of an 2-Mbit memory space that is shared between program and data space. L2 memory can be configured as mapped memory, cache, or combinations of the two. The peripheral set includes: three configurable video ports; a 10/100 Mbps Ethernet MAC (EMAC); a management data input/output (MDIO) module; a VCXO interpolated control port (VIC); one multichannel buffered audio serial port (McASP0); an inter-integrated circuit (I2C) Bus module; two multichannel buffered serial ports (McBSPs); three 32-bit general-purpose timers; a user-configurable 16-bit or 32-bit host-port interface (HPI16/HPI32); a peripheral component interconnect (PCI); a 16-pin general-purpose input/output port (GP0) with programmable interrupt/event generation modes; and a 64-bit glueless external memory interface (EMIFA), which is capable of interfacing to synchronous and asynchronous memories and peripherals.

The DM642 device has three configurable video port peripherals (VP0, VP1, and VP2). These video port peripherals provide a glueless interface to common video decoder and encoder devices. The DM642 video port peripherals support multiple resolutions and video standards (e.g., CCIR601, ITU-BT.656, BT.1120, SMPTE 125M, 260M, 274M, and 296M).

These three video port peripherals are configurable and can support either video capture and/or video display modes. Each video port consists of two channels — A and B with a 5120-byte capture/display buffer that is splittable between the two channels.

For more details on the Video Port peripherals, see the TMS320C64x™ DSP Video Port/VCXO Interpolated Control (VIC) Port Reference Guide (literature number SPRU629).

The McASP0 port supports one transmit and one receive clock zone, with eight serial data pins that can be individually allocated to any of the two zones. The serial port supports time-division multiplexing on each pin from 2 to 32 time slots. The DM642 has sufficient bandwidth to support all eight serial data pins transmitting a 192-kHz stereo signal. Serial data in each zone may be transmitted and received on multiple serial data pins simultaneously and formatted in a multitude of variations on the Philips Inter-IC Sound (I²S) format.

In addition, the McASP0 transmitter may be programmed to output multiple S/PDIF, IEC60958, AES-3, CP-430 encoded data channels simultaneously, with a single RAM containing the full implementation of user data and channel status fields.

McASP0 also provides extensive error-checking and recovery features, such as the bad clock detection circuit for each high-frequency master clock which verifies that the master clock is within a programmed frequency range.

The VCXO interpolated control (VIC) port provides digital-to-analog conversion with resolution from 9-bits to up to 16-bits. The output of the VIC is a single bit interpolated D/A output.For more details on the VIC port, see the TMS320C64x™ DSP Video Port/VCXO Interpolated Control (VIC) Port Reference Guide (literature number SPRU629).

The ethernet media access controller (EMAC) provides an efficient interface between the DM642 DSP core processor and the network. The DM642 EMAC support both 10Base-T and 100Base-TX, or 10 Mbits/second (Mbps) and 100 Mbps in either half- or full-duplex, with hardware flow control and quality of service (QOS) support. The DM642 EMAC makes use of a custom interface to the DSP core that allows efficient data transmission and reception.For more details on the EMAC, see the TMS320C6000 DSP Ethernet Media Access Controller (EMAC) / Management Data Input/Output (MDIO) Module Reference Guide (literature number SPRU628).

The management data input/output (MDIO) module continuously polls all 32 MDIO addresses in order to enumerate all PHY devices in the system. Once a PHY candidate has been selected by the DSP, the MDIO module transparently monitors its link state by reading the PHY status register. Link change events are stored in the MDIO module and can optionally interrupt the DSP, allowing the DSP to poll the link status of the device without continuously performing costly MDIO accesses. For more details on the MDIO, see the TMS320C6000™ DSP Ethernet Media Access Controller (EMAC) / Management Data Input/Output (MDIO) Module Reference Guide (literature number SPRU628).

The I2C0 port on the DM642 allows the DSP to easily control peripheral devices and communicate with a host processor. In addition, the standard multichannel buffered serial port (McBSP) may be used to communicate with serial peripheral interface (SPI) mode peripheral devices.

The DM642 has a complete set of development tools which includes: a new C compiler, an assembly optimizer to simplify programming and scheduling, and a Windows® debugger interface for visibility into source code execution.