TAS2564
- Key Features
- 256 Level, 13-V Class-H Boost
- Speaker Current and Voltage Sense
- Inter Chip Alignment (ICLA) of gain across devices.
- Output Power
- 7-W 0.1% THD+N (8 Ω at 3.8 V)
- Power Consumption (1% THD+N, 4.2 V into 8 Ω)
- 83.5% efficiency at 1 W
- <1uA HW shutdown VBAT Current
- Power Supplies
- VBAT: 2.7 V to 5.5 V
- VDD: 1.65 V to 1.95 V
- Digital (1.5 V) is internally generated from VDD.
- IO and Analog supplies are internally shorted to VDD.
- Protections
- Battery: Advanced Brown Out
- Clipping: VBAT Tracking Peak Voltage Limiter
- Transducer: DC Detection and Prevention
- Device: Thermal and Over Current Protection
- Interfaces and Control
- I2S/TDM: 8 Channels of 32 bit each up to 96 KSPS
- I2C: 4 selectable addresses
- 16 KSPS to 192 KSPS Sample Rates
- MCLK Free operation
- Performance
- Speaker/Receiver Mode with Dynamic Noise Control of Idle Channel Noise (ICN)
- Receiver Mode: 10 µVrms ICN
- Speaker Mode: 15 µVrms ICN
- Spread Spectrum Low EMI Mode
- 110 dB SNR at 1% THD+N(8Ω)
The TAS2564 is a digital input, Class-D audio amplifier with a 256 level, 13 V Class-H boost. The robust 13 V Class-H boost provides the power needed for peak output while the algorithmically-controlled 256 level boost reduces the average power consumption. The boost is easily configured with PurePath Console GUI.
The Class-D amplifier is capable of delivering 7 W of peak power into an 8 Ω. TAS2564 is 83.5% efficient at 1 W output level. Integrated speaker voltage and current sense provides real time monitoring to keep speakers in the safe operation area.
Battery tracking peak voltage limiter with brown-out prevention optimizes amplifier headroom over the entire battery discharge. Up to four devices can share a common bus via I2S/TDM + I 2C interfaces.
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
PP-SALB2-EVM — PP-SALB2-EVM 智慧放大器喇叭特性化基板評估模組 (學習板 2)
This board supports: TAS2555YZEVM, TAS2557EVM and TAS2559EVM.
The Smart Amplifier Speaker Characterization Board, when used in conjunction with a supported TI Smart Amplifier and PurePath Console software, provides users the ability to measure speaker excursion, temperature and other parameters for (...)
PPC3-EVM-MB — 適用智慧型放大器子卡評估模組的 PPC3-EVM-MB 主機板
TAS2564YBGEVM-DC — 具 I/V 感測子卡評估模組的 TAS2564 7-W 智慧型放大器 (需要主機板)
PUREPATHCONSOLE — 適用於音訊系統設計和開發的 PurePath™ Console 圖形開發套件
PurePath Console’s (...)
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
封裝 | 引腳 | 下載 |
---|---|---|
DSBGA (YBG) | 36 | 檢視選項 |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。