TPS54061-Q1

現行

汽車類,4.7V -60 V 200mA 同步降壓 DC-DC 轉換器

現在提供此產品的更新版本

open-in-new 比較替代產品
功能相同,但引腳輸出與所比較的產品不同
LMR36503-Q1 現行 針對尺寸和輕負載效率最佳化的汽車 3-V 至 65-V、0.3-A 降壓轉換器 Smaller footprint, lower IQ and lower EMI.

產品詳細資料

Iout (max) (A) 0.2 Vin (min) (V) 4.7 Vin (max) (V) 60 Topology Buck Type Converter Switching frequency (min) (kHz) 50 Switching frequency (max) (kHz) 1100 Features Enable, Frequency synchronization, Light Load Efficiency, Over Current Protection, Synchronous Rectification, UVLO adjustable Control mode current mode Vout (min) (V) 0.8 Vout (max) (V) 58 Rating Automotive Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.00009
Iout (max) (A) 0.2 Vin (min) (V) 4.7 Vin (max) (V) 60 Topology Buck Type Converter Switching frequency (min) (kHz) 50 Switching frequency (max) (kHz) 1100 Features Enable, Frequency synchronization, Light Load Efficiency, Over Current Protection, Synchronous Rectification, UVLO adjustable Control mode current mode Vout (min) (V) 0.8 Vout (max) (V) 58 Rating Automotive Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.00009
VSON (DRB) 8 9 mm² 3 x 3
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: –40°C to 125°C
      Ambient Operating Temperature Range
    • Device HBM ESD Classification Level H2
    • Device CDM ESD Classification Level C3B
  • Integrated High-Side and Low-Side MOSFETs
  • Diode Emulation for Light-Load Efficiency
  • Peak-Current Mode Control
  • 90-µA Operating Quiescent Current
  • 1.4-µA Shutdown Supply Current
  • 50-kHz to 1.1-MHz Adjustable Switching
    Frequency
  • Synchronizes to External Clock
  • 0.8 V ±1% Voltage Reference
  • Stable With Ceramic Output Capacitors or Low-
    Cost Aluminum Electrolytic
  • Cycle-by-Cycle Current Limit, Thermal, OVP, and
    Frequency Foldback Protection
  • 3-mm × 3-mm, 8-Pin SON Package With Thermal
    Pad
  • –40°C to 150°C Operating Junction Temperature
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: –40°C to 125°C
      Ambient Operating Temperature Range
    • Device HBM ESD Classification Level H2
    • Device CDM ESD Classification Level C3B
  • Integrated High-Side and Low-Side MOSFETs
  • Diode Emulation for Light-Load Efficiency
  • Peak-Current Mode Control
  • 90-µA Operating Quiescent Current
  • 1.4-µA Shutdown Supply Current
  • 50-kHz to 1.1-MHz Adjustable Switching
    Frequency
  • Synchronizes to External Clock
  • 0.8 V ±1% Voltage Reference
  • Stable With Ceramic Output Capacitors or Low-
    Cost Aluminum Electrolytic
  • Cycle-by-Cycle Current Limit, Thermal, OVP, and
    Frequency Foldback Protection
  • 3-mm × 3-mm, 8-Pin SON Package With Thermal
    Pad
  • –40°C to 150°C Operating Junction Temperature

The TPS54061-Q1 device is a 60-V, 200-mA, synchronous step-down DC-DC converter with integrated high-side and low-side MOSFETs. Current-mode control provides simple external compensation and flexible component selection. The non-switching supply current is 90 µA. Using the enable pin reduces the shutdown supply current to 1.4 µA.

To increase light-load efficiency, the low-side MOSFET emulates a diode when the inductor current reaches zero.

The internal undervoltage lockout setting is 4.5 V, but using two resistors on the enable pin can increase the setting. The internal slow-start time controls the output-voltage start-up ramp.

The adjustable switching-frequency range allows optimization of efficiency and external component size. Frequency foldback and thermal shutdown protect the part during an overload condition.

The TPS54061-Q1 enables small designs by integrating the MOSFETs and boot recharge diode, and by minimizing the IC footprint with a small 3-mm × 3-mm thermally-enhanced SON package.

The TPS54061-Q1 is supported in the WEBENCH™ Designer at www.ti.com.

The TPS54061-Q1 device is a 60-V, 200-mA, synchronous step-down DC-DC converter with integrated high-side and low-side MOSFETs. Current-mode control provides simple external compensation and flexible component selection. The non-switching supply current is 90 µA. Using the enable pin reduces the shutdown supply current to 1.4 µA.

To increase light-load efficiency, the low-side MOSFET emulates a diode when the inductor current reaches zero.

The internal undervoltage lockout setting is 4.5 V, but using two resistors on the enable pin can increase the setting. The internal slow-start time controls the output-voltage start-up ramp.

The adjustable switching-frequency range allows optimization of efficiency and external component size. Frequency foldback and thermal shutdown protect the part during an overload condition.

The TPS54061-Q1 enables small designs by integrating the MOSFETs and boot recharge diode, and by minimizing the IC footprint with a small 3-mm × 3-mm thermally-enhanced SON package.

The TPS54061-Q1 is supported in the WEBENCH™ Designer at www.ti.com.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet TPS54061-Q1 Wide-Input, 60-V, 200-mA Synchronous Step-Down DC–DC Converter With Low IQ datasheet (Rev. A) PDF | HTML 2016年 1月 7日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬型號

TPS54061 PSpice Transient Model

SLVM599.ZIP (49 KB) - PSpice Model
計算工具

SLVC431 TPS54061 Design Excel Spreadsheet Tool

支援產品和硬體

支援產品和硬體

產品
AC/DC & DC/DC converters (integrated FET)
TPS54061 具低 IQ 的 4.7V 至 60V 輸入,200mA 同步降壓轉換器 TPS54061-Q1 汽車類,4.7V -60 V 200mA 同步降壓 DC-DC 轉換器
硬體開發
開發板
TPS54061EVM-142 TPS54061 評估模組
封裝 引腳 下載
VSON (DRB) 8 檢視選項

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片