開發模組 (EVM) 的 GUI
TPSM8287A-EVM-GUI — TPSM8287A EVM GUI
The TPSM8287A EVM GUI interfaces with the TPSM8287Axx EVMs via the USB2ANY adaptor to read and write to the device's I2C registers.
產品規格表
TPSM8287A12
- ±0.8% output voltage accuracy
- Differential remote sensing
- Parallelable for multi-phase operation
- Start-up output voltage selectable in 50mV steps from 0.40V to 3.35V through VSETx pins and I2C adjustable in 1.25mV steps
- 5 selectable I2C addresses through VSETx pins
- Adjustable external compensation for wide output capacitor range and optimized transient response
- Optimized for low EMI requirements
- No bond wire package
- Internal input capacitors
- Simplified layout through parallel input path
- Optional synchronization to external clock or spread-spectrum operation
- Power-save mode or forced-PWM operation
- Precise enable input threshold
- Power-good output with window comparator
- Active output discharge
- Excellent thermal performance
- –40°C to 125°C operating temperature range
- 4.5mm × 6.8mm QFN package with 0.5mm pitch
- 77mm2 solution size
The TPSM8287Axx is a family of pin-to-pin step-down DC/DC power modules with differential remote sensing and I2C interface. The power modules integrate a synchronous step-down converter, an inductor and input capacitors to simplify design, reduce external components and save PCB area. The low-profile and compact design is designed for assembly by standard surface mount equipment. The TPSM8287Axx family implements an enhanced control scheme that supports fast transients. The TPSM8287Axx can operate in fixed-frequency or power-save mode. The remote sensing feature optimizes voltage regulation at the point-of-load and the device achieves ±0.8% DC voltage accuracy over the entire temperature range. The devices can operate in stacked, paralleled mode to deliver higher output currents or to spread the power dissipation across multiple devices. The I2C-compatible interface offers several control, monitoring and warning features. The start-up voltage is selectable through the VSETx pins to allow a power-up without an active I2C communication.
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 21 設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
TPSM8287A12BBSEVM — 適用於具有遠端感測 12A 降壓模組的平行式 I²C 介面的 TPSM8287A12 評估模組
TPSM8287A12BBSEVM 評估模組 (EVM) 會加速對 TPSM8287A12 的評估，這是一款 12A 針腳對針腳相容的降壓電源模組，具備 I²C 介面、遠端感測和頻率同步功能，採用 4.5mm x 6.8mm x 1.8mm 包覆成型 QFN 封裝。EVM 可從 2.7V 至 6V 的輸入電壓提供 0.4V 至 3.35V 範圍內精度為 1% 的可調整輸出電壓。TPSM8287A12 是一款高效率、高精度、小型且超薄的負載點 (POL) 電源解決方案，適用於 FPGA、ASIC、DDR 記憶體、光學模組、儲存裝置、測試和測量，以及其他空間有限應用的核心供電。
計算工具
TPSM8287A-COMPONENT-CALCULATOR — TPSM8287A component calculator
TPSM8287A Component Calculator
支援產品和硬體
產品
電源模組 (整合式電感器)
| 封裝 | 引腳 | 下載 |
|---|---|---|
| B0QFN (RDV) | 39 | 檢視選項 |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點