SimpleLink™ CC13x2 and CC26x2 software development kit (SDK) SIMPLELINK-CC13X2-26X2-SDK (ACTIVE)
Texas Instruments has released the production version of the SimpleLink SDK enabling several important enhancements. Please verify hardware and software compatibility here.
Please note that this version of the SimpleLink CC13x2 and CC26x2 SDK is validated with Rev. E devices only. For Rev C or earlier please use v2.30.00.xx of the SimpleLink CC13x2 or SimpleLink CC26x2 SDK.
The SimpleLink SDKs are updated regularly. To get the latest release updates click Alert Me below.
|Part Number||Buy from Texas Instruments or Third Party||Alert Me||Buy from Authorized Distributor||Status||Current Version||Version Date|
Pricing may vary.
|Contact a Distributor|
The SimpleLink CC13x2 and CC26x2 software development kit (SDK) provides a comprehensive software package for the development of Sub-1 GHz and 2.4 GHz applications including support for Bluetooth® Low Energy, Zigbee®, Thread, 802.15.4-based, proprietary, and multi-protocol solutions on the SimpleLink CC13x2 and CC26x2 Wireless MCUs.
TI 15.4 Stack
The TI 15.4-Stack is an IEEE 802.15.4-based star topology networking solution for the Sub-1 GHz band. The SimpleLink Sub-1 GHz 15.4 stack is a complete solution for connecting long-range, low power sensors in the home, building, and city. The SimpleLink Sub-1 GHz 15.4 stack offers a standards-based, star-network that makes Sub-1 GHz connectivity easy by providing all of the necessary components for a robust system and supports development of Sub-1 GHz applications on the ARM® Cortex®-M4F based SimpleLink Sub-1 GHz CC1312R and SimpleLink Multi-Band CC1352R wireless MCUs.
Learn more at www.ti.com/LongRange
The SimpleLink CC13x2 and CC26x2 SDK supports development of proprietary Sub-1 GHz and 2.4 GHz applications on the ARM® Cortex®-M4F based SimpleLink Sub-1 GHz CC1312R, SimpleLink Multi-Band CC1352R, and SimpleLink Multi-Standard CC2652R wireless MCUs using the RF driver and the EasyLink Abstraction Layer. The RF driver offers very low-level API's to run radio operation commands on the RF core and send and receive raw packets. The EasyLink layer is an abstraction layer above the RF driver API’s for the more convenience. It uses the RF driver and executes radio operation commands. The EasyLink library is a starting point for adding an API on top of the RF driver.
Learn more at www.ti.com/LongRange
Bluetooth Low Energy stack
The SimpleLink CC13x2 and CC26x2 SDK includes the Texas Instruments royalty-free Bluetooth low energy (BLE) software protocol stack (BLE5-Stack) component supporting development of single-mode Bluetooth 5 applications on the ARM® Cortex®-M4F based SimpleLink Bluetooth® low energy CC2642R, SimpleLink Multi-Standard CC2652R, and SimpleLink Multi-Band CC1352R, wireless MCUs. The BLE5-Stack includes all necessary software, sample applications and documentation to quickly get started with the development of standalone and network processor BLE applications. Refer to the feature set below and SDK release notes for a detailed description of the features available in this SDK.
Learn more at www.ti.com/BLE
The SimpleLink CC13x2 and CC26x2 SDK includes tools, application examples, documentation and source code of the Thread 1.1 networking protocol based on openthread (github.com/openthread/openthread) supporting development of Thread applications on the ARM® Cortex®-M4F based SimpleLink Multi-Standard CC2652R and SimpleLink Multi-Band CC1352R wireless MCUs. Example applications such as a door lock, window shades, thermostat and temperature sensor (based on Constrained Application Protocol (CoAP) running atop of the Thread networking stack) are released to kick-start the SW design of end equipment sets. Additionally, the SimpleLink CC13x2 and CC26x2 SDK includes a Command-Line Interface (CLI) application and a Network Co-Processor (NCP) implementation, which can be used in combination with a host Thread border-router agent software as a whole Thread border router reference solution.
Learn more at www.ti.com/Thread
The SimpleLink CC13x2 and CC26x2 SDK includes Texas Instruments royalty-free Zigbee software protocol stack (Z-stack) supporting development of Zigbee applications on the ARM® Cortex®-M4F based SimpleLink Multi-Standard CC2652R and SimpleLink Multi-Band CC1352R wireless MCUs. The Zigbee protocol stack supports the latest Zigbee 3.0 specification and contains everything needed for a Zigbee compliant solution, including tools, application examples, documentation, and source code. It also includes a Zigbee Pro compliant Zigbee stack, as well as example applications such as door lock, light, switch, temperature sensor and thermostat. Zigbee Network Processor configuration is supported, which can be used in two chip architectures where the host implements the Cluster Library and the Zigbee applications.
Learn more at www.ti.com/Zigbee
The SimpleLink CC13x2 and CC26x2 SDK supports development of multi-standard solutions on the ARM® Cortex®-M4F based SimpleLink Multi-Standard CC2652R and SimpleLink Multi-Band CC1352R wireless MCUs. The SimpleLink CC13x2 and CC26x2 SDK supports concurrent operation of Bluetooth Low Energy + Sub-1 GHz (TI 15.4-Stack or proprietary Sub-1 GHz) and Bluetooth Low Energy + Zigbee. This Concurrent operation is built using the Dynamic Multi-Protocol Manager (DMM). The DMM handles dynamic switching between stacks based on policy and run-time stack states.
Learn more at www.ti.com/MultiStandard
SimpleLink CC2652RB BAW crystal-less technology
The SIMPLELINK-CC2652RB-BLE-SDK supports evaluation of Bluetooth® Low Energy on the SimpleLink crystal-less BAW multi-protocol 2.4GHz CC2652RB wireless MCU. Support for other 2.4 GHz technologies is currently under development.
The SimpleLink CC2652RB software development kit (SDK) provides a comprehensive software package for the development of Bluetooth® Low Energy applications on the SimpleLink CC2652RB Wireless MCU. The SimpleLink CC2652RB wireless MCU integrates BAW technology allowing for crystal-less RF designs and can be evaluated using the SimpleLink CC2652RB software development kit and the SimpleLink CC2652RB LaunchPad. The SimpleLink CC2652RB device has a high frequency internal oscillator allowing you to design any 2.4 GHz applications without the need for external crystals. This simplifies design, testing and integration as wells as reducing the total required footprint.
Learn more at www.ti.com/product/CC2652RB
The SimpleLink CC13x2 and CC26x2 SDK is part of TI's SimpleLink MCU platform, offering a single development environment that delivers flexible hardware, software and tool options for customers developing wired and wireless applications.
Learn more at www.ti.com/simplelink.
This release is available royalty-free to customers using the following TI devices:
- SimpleLink Sub-1 GHz CC1312R
- SimpleLink multi-band CC1352R
- SimpleLink multi-standard CC2652R
- SimpleLink Bluetooth® Low Energy CC2642R
- SimpleLink multi-band CC1352P with integrated power amplifier
- SimpleLink crystal-less BAW wireless MCU