SLVSEO0B Data sheet

SLVSEO0B August 2021 – February 2023 ADC12DJ4000RF

PRODUCTION DATA

Package Options

Mechanical Data (Package|Pins)

ZEG|144
AAV|144
- MPBGAM2C

Thermal pad, mechanical data (Package|Pins)

Orderable Information

7.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)⁽¹⁾

			MIN	MAX	UNIT
V_DD	Supply voltage range	VA19⁽²⁾	–0.3	2.35	V
		VA11⁽²⁾	–0.3	1.32
		VD11⁽³⁾	–0.3	1.32
		Voltage between VD11 and VA11	–1.32	1.32
V_GND	Voltage between AGND and DGND		–0.1	0.1	V
V_PIN	Pin voltage range	DA[7:0]+, DA[7:0]–, DB[7:0]+, DB[7:0]–, TMSTP+, TMSTP–⁽³⁾	–0.5	VD11 + 0.5⁽⁵⁾	V
		CLK+, CLK–, SYSREF+, SYSREF–⁽²⁾	–0.5	VA11 + 0.5⁽⁴⁾
		BG, TDIODE+, TDIODE–⁽²⁾	–0.5	VA19 + 0.5⁽⁶⁾
		INA+, INA–, INB+, INB–⁽²⁾	–1	1
		CALSTAT, CALTRIG, NCOA0, NCOA1, NCOB0, NCOB1, ORA0, ORA1, ORB0, ORB1, PD, SCLK, SCS, SDI, SDO, SYNCSE⁽²⁾	–0.5	VA19 + 0.5⁽⁶⁾
I_MAX(ANY)	Peak input current (any input except INA+, INA–, INB+, INB–)		–25	25	mA
I_MAX(INx)	Peak input current (INA+, INA–, INB+, INB–)		–50	50	mA
P_MAX(INx)	Peak RF input power (INA+, INA–, INB+, INB–)	differential with Z_S-DIFF = 100 Ω, up to 21 days⁽⁷⁾		26.5	dBm
P_MAX(INx)	Peak RF input power (INA+, INA–, INB+, INB–)	Single-ended with Z_S-SE = 50 Ω		16.4	dBm
I_MAX(ALL)	Peak total input current (sum of absolute value of all currents forced in or out, not including power-supply current)			100	mA
T_j	Junction temperature			150	°C
T_stg	Storage temperature		–65	150	°C

(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2) Measured to AGND.

(3) Measured to DGND.

(4) Maximum voltage not to exceed VA11 absolute maximum rating.

(5) Maximum voltage not to exceed VD11 absolute maximum rating.

(6) Maximum voltage not to exceed VA19 absolute maximum rating.

(7) Tested continuously for 21 days with F_IN = 1.2GHz on a typical device. At the end of testing, the device was not damaged. During the overdrive, the ADC is still properly converting the input signal, although it will be saturated for voltages beyond the input fullscale.