SCAS844H August   2007  – July 2025 CDCE949 , CDCEL949

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics
    6. 5.6 EEPROM Specification
    7. 5.7 Timing Requirements: CLK_IN
    8. 5.8 Timing Requirements: SDA/SCL
    9. 5.9 Typical Characteristics
  7. 6 Parameter Measurement Information
  8. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Control Terminal Setting
      2. 7.3.2 Default Device Setting
      3. 7.3.3 SDA/SCL Serial Interface
      4. 7.3.4 Data Protocol
    4. 7.4 Device Functional Modes
      1. 7.4.1 SDA/SCL Hardware Interface
    5. 7.5 Programming
  9. 8 Register Maps
    1. 8.1 SDA/SCL Configuration Registers
  10. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
        1. 9.2.2.1 Spread Spectrum Clock (SSC)
        2. 9.2.2.2 PLL Frequency Planning
        3. 9.2.2.3 Crystal Oscillator Start-Up
        4. 9.2.2.4 Frequency Adjustment With Crystal Oscillator Pulling
        5. 9.2.2.5 Unused Inputs and Outputs
        6. 9.2.2.6 Switching Between XO and VCXO Mode
      3. 9.2.3 Application Curves
    3. 9.3 Power Supply Recommendations
    4. 9.4 Layout
      1. 9.4.1 Layout Guidelines
      2. 9.4.2 Layout Example
  11. 10Device and Documentation Support
    1. 10.1 Device Support
      1. 10.1.1 Development Support
    2. 10.2 Related Documentation
    3. 10.3 Related Links
    4. 10.4 Receiving Notification of Documentation Updates
    5. 10.5 Support Resources
    6. 10.6 Trademarks
    7. 10.7 Electrostatic Discharge Caution
    8. 10.8 Glossary
  12. 11Revision History
  13. 12Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

9.2.2.2 PLL Frequency Planning

At a given input frequency (ƒIN), use Equation 1 to calculate the output frequency (ƒOUT) of the CDCEx949.

Equation 1. ƒOUT=ƒINPdiv×NM

where

  • M (1 to 511) and N (1 to 4095) are the multiplier/divide values of the PLL
  • Pdiv (1 to 127) is the output divider

Use Equation 2 to calculate the target VCO frequency (ƒVCO) of each PLL.

Equation 2. ƒVCO=ƒIN×NM

The PLL internally operates as fractional divider and requires the following multiplier/divider settings:

  • N
  • P = 4 – int(log2N/M; if P < 0 then P = 0
  • Q = int(N'/M)
  • R = N′ – M × Q

where

N′ = N × 2P

N ≥ M;

80MHz ≤ ƒVCO ≤ 230MHz

16 ≤ Q ≤ 63

0 ≤ P ≤ 4

0 ≤ R ≤ 51

Example:
for ƒIN = 27MHz; M = 1; N = 4; Pdiv = 2for ƒIN = 27MHz; M = 2; N = 11; Pdiv = 2
→fOUT = 54MHz→fOUT = 74.25MHz
→fVCO = 108MHz→fVCO = 148.50MHz
→P = 4 – int(log24) = 4 – 2 = 2→P = 4 – int(log25.5) = 4 – 2 = 2
→N' = 4 × 22 = 16→N' = 11 × 22 = 44
→Q = int(16) = 16→Q = int(22) = 22
→R = 16 – 16 = 0→R = 44 – 44 = 0

The values for P, Q, R, and N’ are automatically calculated when using TI Pro-Clock software.