DLPS024G August 2012 – February 2020 DLPC410
PRODUCTION DATA.
Calibration of the DLPC410 2xLVDS input data buses is performed on each of the data (DDC_DIN) and DVALID signal pairs of all input buses using the training pattern as specified in Input Data Interface (DIN) Training. When this calibration is successful, the System Initialization process will move on to initializing the DLPA200 devices.
NOTE
The training pattern going into the SERDES on the transmit side is different than the pattern on the receive SERDES. On the receive side the value should be “0100”. However, this could translate to “0010” on the transmit side. Please see Input Data Interface (DIN) Training for more information. An improper training pattern could cause the part to not perform the commands correctly.