SLASE58E February   2016  – December 2019 MSP430FR2310 , MSP430FR2311

PRODUCTION DATA.  

  1. 1Device Overview
    1. 1.1 Features
    2. 1.2 Applications
    3. 1.3 Description
    4. 1.4 Functional Block Diagram
  2. 2Revision History
  3. 3Device Comparison
    1. 3.1 Related Products
  4. 4Terminal Configuration and Functions
    1. 4.1 Pin Diagrams
    2. 4.2 Pin Attributes
    3. 4.3 Signal Descriptions
    4. 4.4 Pin Multiplexing
    5. 4.5 Buffer Type
    6. 4.6 Connection of Unused Pins
  5. 5Specifications
    1. 5.1  Absolute Maximum Ratings
    2. 5.2  ESD Ratings
    3. 5.3  Recommended Operating Conditions
    4. 5.4  Active Mode Supply Current Into VCC Excluding External Current
    5. 5.5  Active Mode Supply Current Per MHz
    6. 5.6  Low-Power Mode LPM0 Supply Currents Into VCC Excluding External Current
    7. 5.7  Low-Power Mode LPM3 and LPM4 Supply Currents (Into VCC) Excluding External Current
    8. 5.8  Low-Power Mode LPMx.5 Supply Currents (Into VCC) Excluding External Current
    9. 5.9  Production Distribution of LPM Supply Currents
    10. 5.10 Typical Characteristics – Current Consumption Per Module
    11. 5.11 Thermal Resistance Characteristics
    12. 5.12 Timing and Switching Characteristics
      1. 5.12.1  Power Supply Sequencing
        1. Table 5-1 PMM, SVS and BOR
      2. 5.12.2  Reset Timing
        1. Table 5-2 Wake-up Times From Low-Power Modes and Reset
      3. 5.12.3  Clock Specifications
        1. Table 5-3 XT1 Crystal Oscillator (Low Frequency)
        2. Table 5-4 XT1 Crystal Oscillator (High Frequency)
        3. Table 5-5 DCO FLL
        4. Table 5-6 DCO Frequency
        5. Table 5-7 REFO
        6. Table 5-8 Internal Very-Low-Power Low-Frequency Oscillator (VLO)
        7. Table 5-9 Module Oscillator (MODOSC)
      4. 5.12.4  Digital I/Os
        1. Table 5-10 Digital Inputs
        2. Table 5-11 Digital Outputs
        3. 5.12.4.1   Digital I/O Typical Characteristics
      5. 5.12.5  VREF+ Built-in Reference
        1. Table 5-12 VREF+
      6. 5.12.6  Timer_B
        1. Table 5-13 Timer_B
      7. 5.12.7  eUSCI
        1. Table 5-14 eUSCI (UART Mode) Clock Frequency
        2. Table 5-15 eUSCI (UART Mode) Switching Characteristics
        3. Table 5-16 eUSCI (SPI Master Mode) Clock Frequency
        4. Table 5-17 eUSCI (SPI Master Mode) Switching Characteristics
        5. Table 5-18 eUSCI (SPI Slave Mode) Switching Characteristics
        6. Table 5-19 eUSCI (I2C Mode) Switching Characteristics
      8. 5.12.8  ADC
        1. Table 5-20 ADC, Power Supply and Input Range Conditions
        2. Table 5-21 ADC, 10-Bit Timing Parameters
        3. Table 5-22 ADC, 10-Bit Linearity Parameters
      9. 5.12.9  Enhanced Comparator (eCOMP)
        1. Table 5-23 eCOMP0
      10. 5.12.10 Smart Analog Combo (SAC)
        1. Table 5-24 SAC0 (SAC-L1, OA)
      11. 5.12.11 Transimpedance Amplifier (TIA)
        1. Table 5-25 TIA0
      12. 5.12.12 FRAM
        1. Table 5-26 FRAM
      13. 5.12.13 Emulation and Debug
        1. Table 5-27 JTAG, Spy-Bi-Wire Interface
        2. Table 5-28 JTAG, 4-Wire Interface
  6. 6Detailed Description
    1. 6.1  Overview
    2. 6.2  CPU
    3. 6.3  Operating Modes
    4. 6.4  Interrupt Vector Addresses
    5. 6.5  Memory Organization
    6. 6.6  Bootloader (BSL)
    7. 6.7  JTAG Standard Interface
    8. 6.8  Spy-Bi-Wire Interface (SBW)
    9. 6.9  FRAM
    10. 6.10 Memory Protection
    11. 6.11 Peripherals
      1. 6.11.1  Power-Management Module (PMM) and On-chip Reference Voltages
      2. 6.11.2  Clock System (CS) and Clock Distribution
      3. 6.11.3  General-Purpose Input/Output Port (I/O)
      4. 6.11.4  Watchdog Timer (WDT)
      5. 6.11.5  System Module (SYS)
      6. 6.11.6  Cyclic Redundancy Check (CRC)
      7. 6.11.7  Enhanced Universal Serial Communication Interface (eUSCI_A0, eUSCI_B0)
      8. 6.11.8  Timers (Timer0_B3, Timer1_B3)
      9. 6.11.9  Backup Memory (BAKMEM)
      10. 6.11.10 Real-Time Clock (RTC) Counter
      11. 6.11.11 10-Bit Analog-to-Digital Converter (ADC)
      12. 6.11.12 eCOMP0
      13. 6.11.13 SAC0
      14. 6.11.14 TIA0
      15. 6.11.15 eCOMP0, SAC0, TIA0, and ADC in SOC Interconnection
      16. 6.11.16 Embedded Emulation Module (EEM)
      17. 6.11.17 Peripheral File Map
    12. 6.12 Input/Output Diagrams
      1. 6.12.1 Port P1 Input/Output With Schmitt Trigger
      2. 6.12.2 Port P2 Input/Output With Schmitt Trigger
    13. 6.13 Device Descriptors (TLV)
    14. 6.14 Identification
      1. 6.14.1 Revision Identification
      2. 6.14.2 Device Identification
      3. 6.14.3 JTAG Identification
  7. 7Applications, Implementation, and Layout
    1. 7.1 Device Connection and Layout Fundamentals
      1. 7.1.1 Power Supply Decoupling and Bulk Capacitors
      2. 7.1.2 External Oscillator
      3. 7.1.3 JTAG
      4. 7.1.4 Reset
      5. 7.1.5 Unused Pins
      6. 7.1.6 General Layout Recommendations
      7. 7.1.7 Do's and Don'ts
    2. 7.2 Peripheral- and Interface-Specific Design Information
      1. 7.2.1 ADC Peripheral
        1. 7.2.1.1 Partial Schematic
        2. 7.2.1.2 Design Requirements
        3. 7.2.1.3 Layout Guidelines
    3. 7.3 Typical Applications
  8. 8Device and Documentation Support
    1. 8.1 Getting Started
    2. 8.2 Device Nomenclature
    3. 8.3 Tools and Software
    4. 8.4 Documentation Support
    5. 8.5 Related Links
    6. 8.6 Community Resources
    7. 8.7 Trademarks
    8. 8.8 Electrostatic Discharge Caution
    9. 8.9 Glossary
  9. 9Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

6.11.17 Peripheral File Map

Table 6-23 lists the base address of the registers for each peripheral. Table 6-24 through Table 6-42 list all of the available registers for each peripheral and their address offsets.

Table 6-23 Peripherals Summary

MODULE NAME BASE ADDRESS SIZE
Special Functions (see Table 6-24) 0100h 0010h
PMM (see Table 6-25) 0120h 0020h
SYS (see Table 6-26) 0140h 0040h
CS (see Table 6-27) 0180h 0020h
FRAM (see Table 6-28) 01A0h 0010h
CRC (see Table 6-29) 01C0h 0008h
WDT (see Table 6-30) 01CCh 0002h
Port P1, P2 (see Table 6-31) 0200h 0020h
Capacitive Touch I/O (see Table 6-32) 02E0h 0010h
RTC (see Table 6-33) 0300h 0010h
Timer0_B3 (see Table 6-34) 0380h 0030h
Timer1_B3 (see Table 6-35) 03C0h 0030h
eUSCI_A0 (see Table 6-36) 0500h 0020h
eUSCI_B0 (see Table 6-37) 0540h 0030h
Backup Memory (see Table 6-38) 0660h 0020h
ADC (see Table 6-39) 0700h 0040h
eCOMP0 (see Table 6-40) 08E0h 0020h
SAC0 (see Table 6-41) 0C80h 0010h
TIA0 (see Table 6-42) 0F00h 0010h

Table 6-24 Special Function Registers (Base Address: 0100h)

REGISTER DESCRIPTION REGISTER OFFSET
SFR interrupt enable SFRIE1 00h
SFR interrupt flag SFRIFG1 02h
SFR reset pin control SFRRPCR 04h

Table 6-25 PMM Registers (Base Address: 0120h)

REGISTER DESCRIPTION REGISTER OFFSET
PMM control 0 PMMCTL0 00h
PMM control 1 PMMCTL1 02h
PMM control 2 PMMCTL2 04h
PMM interrupt flags PMMIFG 0Ah
PM5 control 0 PM5CTL0 10h

Table 6-26 SYS Registers (Base Address: 0140h)

REGISTER DESCRIPTION REGISTER OFFSET
System control SYSCTL 00h
Bootloader configuration area SYSBSLC 02h
JTAG mailbox control SYSJMBC 06h
JTAG mailbox input 0 SYSJMBI0 08h
JTAG mailbox input 1 SYSJMBI1 0Ah
JTAG mailbox output 0 SYSJMBO0 0Ch
JTAG mailbox output 1 SYSJMBO1 0Eh
User NMI vector generator SYSUNIV 1Ah
System NMI vector generator SYSSNIV 1Ch
Reset vector generator SYSRSTIV 1Eh
System configuration 0 SYSCFG0 20h
System configuration 1 SYSCFG1 22h
System configuration 2 SYSCFG2 24h

Table 6-27 CS Registers (Base Address: 0180h)

REGISTER DESCRIPTION REGISTER OFFSET
CS control 0 CSCTL0 00h
CS control 1 CSCTL1 02h
CS control 2 CSCTL2 04h
CS control 3 CSCTL3 06h
CS control 4 CSCTL4 08h
CS control 5 CSCTL5 0Ah
CS control 6 CSCTL6 0Ch
CS control 7 CSCTL7 0Eh
CS control 8 CSCTL8 10h

Table 6-28 FRAM Registers (Base Address: 01A0h)

REGISTER DESCRIPTION REGISTER OFFSET
FRAM control 0 FRCTL0 00h
General control 0 GCCTL0 04h
General control 1 GCCTL1 06h

Table 6-29 CRC Registers (Base Address: 01C0h)

REGISTER DESCRIPTION REGISTER OFFSET
CRC data input CRC16DI 00h
CRC data input reverse byte CRCDIRB 02h
CRC initialization and result CRCINIRES 04h
CRC result reverse byte CRCRESR 06h

Table 6-30 WDT Registers (Base Address: 01CCh)

REGISTER DESCRIPTION REGISTER OFFSET
Watchdog timer control WDTCTL 00h

Table 6-31 Port P1, P2 Registers (Base Address: 0200h)

REGISTER DESCRIPTION REGISTER OFFSET
Port P1 input P1IN 00h
Port P1 output P1OUT 02h
Port P1 direction P1DIR 04h
Port P1 pulling enable P1REN 06h
Port P1 selection 0 P1SEL0 0Ah
Port P1 selection 1 P1SEL1 0Ch
Port P1 interrupt vector word P1IV 0Eh
Port P1 complement selection P1SELC 16h
Port P1 interrupt edge select P1IES 18h
Port P1 interrupt enable P1IE 1Ah
Port P1 interrupt flag P1IFG 1Ch
Port P2 input P2IN 01h
Port P2 output P2OUT 03h
Port P2 direction P2DIR 05h
Port P2 pulling enable P2REN 07h
Port P2 selection 0 P2SEL0 0Bh
Port P2 selection 1 P2SEL1 0Dh
Port P2 complement selection P2SELC 17h
Port P2 interrupt vector word P2IV 1Eh
Port P2 interrupt edge select P2IES 19h
Port P2 interrupt enable P2IE 1Bh
Port P2 interrupt flag P2IFG 1Dh

Table 6-32 Capacitive Touch I/O Registers (Base Address: 02E0h)

REGISTER DESCRIPTION REGISTER OFFSET
Capacitive touch I/O 0 control CAPIO0CTL 0Eh

Table 6-33 RTC Registers (Base Address: 0300h)

REGISTER DESCRIPTION REGISTER OFFSET
RTC control RTCCTL 00h
RTC interrupt vector RTCIV 04h
RTC modulo RTCMOD 08h
RTC counter RTCCNT 0Ch

Table 6-34 Timer0_B3 Registers (Base Address: 0380h)

REGISTER DESCRIPTION REGISTER OFFSET
TB0 control TB0CTL 00h
Capture/compare control 0 TB0CCTL0 02h
Capture/compare control 1 TB0CCTL1 04h
Capture/compare control 2 TB0CCTL2 06h
TB0 counter TB0R 10h
Capture/compare 0 TB0CCR0 12h
Capture/compare 1 TB0CCR1 14h
Capture/compare 2 TB0CCR2 16h
TB0 expansion 0 TB0EX0 20h
TB0 interrupt vector TB0IV 2Eh

Table 6-35 Timer1_B3 Registers (Base Address: 03C0h)

REGISTER DESCRIPTION REGISTER OFFSET
TB1 control TB1CTL 00h
Capture/compare control 0 TB1CCTL0 02h
Capture/compare control 1 TB1CCTL1 04h
Capture/compare control 2 TB1CCTL2 06h
TB1 counter TB1R 10h
Capture/compare 0 TB1CCR0 12h
Capture/compare 1 TB1CCR1 14h
Capture/compare 2 TB1CCR2 16h
TB1 expansion 0 TB1EX0 20h
TB1 interrupt vector TB1IV 2Eh

Table 6-36 eUSCI_A0 Registers (Base Address: 0500h)

REGISTER DESCRIPTION REGISTER OFFSET
eUSCI_A control word 0 UCA0CTLW0 00h
eUSCI_A control word 1 UCA0CTLW1 02h
eUSCI_A control rate 0 UCA0BR0 06h
eUSCI_A control rate 1 UCA0BR1 07h
eUSCI_A modulation control UCA0MCTLW 08h
eUSCI_A status UCA0STAT 0Ah
eUSCI_A receive buffer UCA0RXBUF 0Ch
eUSCI_A transmit buffer UCA0TXBUF 0Eh
eUSCI_A LIN control UCA0ABCTL 10h
eUSCI_A IrDA transmit control lUCA0IRTCTL 12h
eUSCI_A IrDA receive control IUCA0IRRCTL 13h
eUSCI_A interrupt enable UCA0IE 1Ah
eUSCI_A interrupt flags UCA0IFG 1Ch
eUSCI_A interrupt vector word UCA0IV 1Eh

Table 6-37 eUSCI_B0 Registers (Base Address: 0540h)

REGISTER DESCRIPTION REGISTER OFFSET
eUSCI_B control word 0 UCB0CTLW0 00h
eUSCI_B control word 1 UCB0CTLW1 02h
eUSCI_B bit rate 0 UCB0BR0 06h
eUSCI_B bit rate 1 UCB0BR1 07h
eUSCI_B status word UCB0STATW 08h
eUSCI_B byte counter threshold UCB0TBCNT 0Ah
eUSCI_B receive buffer UCB0RXBUF 0Ch
eUSCI_B transmit buffer UCB0TXBUF 0Eh
eUSCI_B I2C own address 0 UCB0I2COA0 14h
eUSCI_B I2C own address 1 UCB0I2COA1 16h
eUSCI_B I2C own address 2 UCB0I2COA2 18h
eUSCI_B I2C own address 3 UCB0I2COA3 1Ah
eUSCI_B receive address UCB0ADDRX 1Ch
eUSCI_B address mask UCB0ADDMASK 1Eh
eUSCI_B I2C slave address UCB0I2CSA 20h
eUSCI_B interrupt enable UCB0IE 2Ah
eUSCI_B interrupt flags UCB0IFG 2Ch
eUSCI_B interrupt vector word UCB0IV 2Eh

Table 6-38 Backup Memory Registers (Base Address: 0660h)

REGISTER DESCRIPTION REGISTER OFFSET
Backup memory 0 BAKMEM0 00h
Backup memory 1 BAKMEM1 02h
Backup memory 2 BAKMEM2 04h
Backup memory 3 BAKMEM3 06h
Backup memory 4 BAKMEM4 08h
Backup memory 5 BAKMEM5 0Ah
Backup memory 6 BAKMEM6 0Ch
Backup memory 7 BAKMEM7 0Eh
Backup memory 8 BAKMEM8 10h
Backup memory 9 BAKMEM9 12h
Backup memory 10 BAKMEM10 14h
Backup memory 11 BAKMEM11 16h
Backup memory 12 BAKMEM12 18h
Backup memory 13 BAKMEM13 1Ah
Backup memory 14 BAKMEM14 1Ch
Backup memory 15 BAKMEM15 1Eh

Table 6-39 ADC Registers (Base Address: 0700h)

REGISTER DESCRIPTION REGISTER OFFSET
ADC control 0 ADCCTL0 00h
ADC control 1 ADCCTL1 02h
ADC control 2 ADCCTL2 04h
ADC window comparator low threshold ADCLO 06h
ADC window comparator high threshold ADCHI 08h
ADC memory control 0 ADCMCTL0 0Ah
ADC conversion memory ADCMEM0 12h
ADC interrupt enable ADCIE 1Ah
ADC interrupt flags ADCIFG 1Ch
ADC interrupt vector word ADCIV 1Eh

Table 6-40 eCOMP0 Registers (Base Address: 08E0h)

REGISTER DESCRIPTION REGISTER OFFSET
Comparator control 0 CPCTL0 00h
Comparator control 1 CPCTL1 02h
Comparator interrupt CPINT 06h
Comparator interrupt vector CPIV 08h
Comparator built-in DAC control CPDACCTL 10h
Comparator built-in DAC data CPDACDATA 12h

Table 6-41 SAC0 Registers (Base Address: 0C80h)

REGISTER DESCRIPTION REGISTER OFFSET
SAC0 OA control SAC0OA 00h

Table 6-42 TIA0 Registers (Base Address: 0F00h)

REGISTER DESCRIPTION REGISTER OFFSET
TIA control TRICTL 00h