The output current can be configured with an external resistor on ILIM_ADJ pin. The maximum settable current limit is 300 mA. This maximum setting specifies a minimum of 300 mA over temperature and voltage.
Output disable due to current fault and current fault auto recovery features can be disabled by floating ILIM_ADJ pin. However, the current fault indication is still active in this configuration. This feature is useful when driving large capacitances.
|ILIM_ADJ Pin Condition||CQ Current Limit||NFAULT Indication During Fault||Output Disable and Auto Recovery|
|RSET resistor to L-||Variable||Yes||Yes|
|Connected to L-||300 mA||Yes||Yes|