SBOSA41A May   2023  – September 2023 TMP4718

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Revision History
  6. 5 Device Comparison
  7. 6 Pin Configuration and Functions
  8. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics
    6. 7.6 I2C Interface Timing
    7. 7.7 Timing Diagrams
    8. 7.8 Typical Characteristics
  9. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 1.2-V Logic Compatible Inputs
      2. 8.3.2 Series Resistance Cancellation
      3. 8.3.3 Device Initialization, Resistor Decoding, and Default Temperature Conversion
      4. 8.3.4 Adjustable Default T_CRIT High-Temperature Limit
      5. 8.3.5 ALERT and T_CRIT Output
      6. 8.3.6 Fault Queue
      7. 8.3.7 Filtering
      8. 8.3.8 One-Shot Conversions
    4. 8.4 Device Functional Modes
      1. 8.4.1 Interrupt and Comparator Mode
        1. 8.4.1.1 Interrupt Mode
        2. 8.4.1.2 Comparator Mode
        3. 8.4.1.3 T_CRIT Output
      2. 8.4.2 Shutdown Mode
      3. 8.4.3 Continuous Conversion Mode
    5. 8.5 Programming
      1. 8.5.1 Temperature Data Format
      2. 8.5.2 I2C and SMBus Interface
      3. 8.5.3 Device Address
      4. 8.5.4 Bus Transactions
        1. 8.5.4.1 Writes
        2. 8.5.4.2 Reads
      5. 8.5.5 SMBus Alert Mode
    6. 8.6 Register Map
  10. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
      3. 9.2.3 Application Curves
    3. 9.3 Power Supply Recommendations
    4. 9.4 Layout
      1. 9.4.1 Layout Guidelines
      2. 9.4.2 Layout Example
  11. 10Device and Documentation Support
    1. 10.1 Documentation Support
      1. 10.1.1 Related Documentation
    2. 10.2 Receiving Notification of Documentation Updates
    3. 10.3 Support Resources
    4. 10.4 Trademarks
    5. 10.5 Electrostatic Discharge Caution
    6. 10.6 Glossary
  12. 11Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

8.3.6 Fault Queue

The device includes a fault queue feature. When enable in the register settings, the ALERT and T_CRIT will only be generated if there are three consecutive temperature conversion results beyond the limits. When this feature is disabled, only one temperature conversion result beyond the limits will generate an ALERT or T_CRIT warning.

This feature only applies to the remote channel and will have no effect on the local channel. The fault queue is enabled upon device POR (that is, three successive temperature results beyond the limits triggers an ALERT or T_CRIT warning).