SCDS410D March   2019  – February 2024 TMUX1101 , TMUX1102

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Device Comparison Table
  6. 5 Pin Configuration and Functions
  7. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics (VDD = 5V ±10 %)
    6. 6.6 Electrical Characteristics (VDD = 3.3V ±10 %)
    7. 6.7 Electrical Characteristics (VDD = 1.8V ±10 %)
    8. 6.8 Electrical Characteristics (VDD = 1.2V ±10 %)
    9. 6.9 Typical Characteristics
  8. 7 Parameter Measurement Information
    1. 7.1 On-Resistance
    2. 7.2 Off-Leakage Current
    3. 7.3 On-Leakage Current
    4. 7.4 Transition Time
    5. 7.5 Charge Injection
    6. 7.6 Off Isolation
    7. 7.7 Bandwidth
  9. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Bidirectional Operation
      2. 8.3.2 Rail-to-Rail Operation
      3. 8.3.3 1.8V Logic Compatible Inputs
      4. 8.3.4 Fail-Safe Logic
      5. 8.3.5 Ultra-Low Leakage Current
      6. 8.3.6 Ultra-Low Charge Injection
    4. 8.4 Device Functional Modes
      1. 8.4.1 Truth Tables
  10. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application - Sample-and-Hold Circuit
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
      3. 9.2.3 Application Curve
    3. 9.3 Typical Application - Switched Gain Amplifier
      1. 9.3.1 Design Requirements
      2. 9.3.2 Detailed Design Procedure
      3. 9.3.3 Application Curve
    4. 9.4 Power Supply Recommendations
    5. 9.5 Layout
      1. 9.5.1 Layout Guidelines
      2. 9.5.2 Layout Example
  11. 10Device and Documentation Support
    1. 10.1 Documentation Support
      1. 10.1.1 Related Documentation
    2. 10.2 Receiving Notification of Documentation Updates
    3. 10.3 Support Resources
    4. 10.4 Trademarks
    5. 10.5 Electrostatic Discharge Caution
    6. 10.6 Glossary
  12. 11Revision History
  13. 12Mechanical, Packaging, and Orderable Information

Package Options

Refer to the PDF data sheet for device specific package drawings

Mechanical Data (Package|Pins)
  • DBV|5
  • DCK|5
Thermal pad, mechanical data (Package|Pins)
Orderable Information

6.5 Electrical Characteristics (VDD = 5V ±10 %)

at TA = 25°C, VDD = 5V (unless otherwise noted)
PARAMETER TEST CONDITIONS TA MIN TYP MAX UNIT
ANALOG SWITCH
RON On-resistance VS = 0V to VDD
ISD = 10mA
Refer to  On-resistance		 25°C   1.8 4 Ω
–40°C to +85°C     4.5 Ω
–40°C to +125°C     4.9 Ω
RON FLAT On-resistance flatness VS = 0V to VDD
ISD = 10mA
Refer to  On-resistance		 25°C   0.85 Ω
–40°C to +85°C   1.6 Ω
–40°C to +125°C   1.6 Ω
IS(OFF) Source off leakage current(1) VDD = 5V
Switch Off
VD = 4.5V / 1.5V
VS = 1.5V / 4.5V
Refer to  Off-leakage current		 25°C –0.08 ±0.005 0.08 nA
–40°C to +85°C –0.3 0.3 nA
–40°C to +125°C –0.9 0.9 nA
ID(OFF) Drain off leakage current(1) VDD = 5V
Switch Off
VD = 4.5V / 1.5V
VS = 1.5V / 4.5V
Refer to  Off-leakage current		 25°C –0.08 ±0.005 0.08 nA
–40°C to +85°C –0.3 0.3 nA
–40°C to +125°C –0.9 0.9 nA
ID(ON)
IS(ON)		 Channel on leakage current VDD = 5V
Switch On
VD = VS = 2.5V
Refer to  On-leakage current		 25°C –0.025 ±0.003 0.025 nA
–40°C to +85°C –0.2 0.2 nA
–40°C to +125°C –0.95 0.95 nA
ID(ON)
IS(ON)		 Channel on leakage current VDD = 5V
Switch On
VD = VS = 4.5V / 1.5V
Refer to  On-leakage current		 25°C –0.1 ±0.01 0.1 nA
–40°C to +85°C –0.35 0.35 nA
–40°C to +125°C –2 2 nA
LOGIC INPUTS (SEL)
VIH Input logic high  –40°C to +125°C 1.49   5.5 V
VIL Input logic low  –40°C to +125°C 0   0.87 V
IIH
IIL		 Input leakage current 25°C   ±0.005   µA
IIH
IIL		 Input leakage current –40°C to +125°C     ±0.06 µA
CIN Logic input capacitance 25°C   1 pF
CIN Logic input capacitance –40°C to +125°C   2 pF
POWER SUPPLY
IDD VDD supply current Logic inputs = 0V or 5.5V 25°C   0.003   µA
–40°C to +125°C     1 µA
DYNAMIC CHARACTERISTICS
tTRAN Transition time from control input VS = 3V
RL = 200Ω, CL = 15pF
Refer to  Transition time		 25°C   12   ns
–40°C to +85°C     17 ns
–40°C to +125°C     18 ns
QC Charge Injection VS = 1V
RS = 0Ω, CL = 1nF
Refer to  Charge injection		 25°C –1.5 pC
OISO Off Isolation RL = 50Ω, CL = 5pF
f = 1MHz
Refer to  Off isolation		 25°C   –62   dB
RL = 50Ω, CL = 5pF
f = 10MHz
Refer to Off isolation		 25°C   –40   dB
BW Bandwidth RL = 50Ω, CL = 5pF
Refer to  Bandwidth		 25°C   300   MHz
CSOFF Source off capacitance f = 1MHz 25°C   6   pF
CDOFF Drain off capacitance f = 1MHz 25°C   10   pF
CSON
CDON		 On capacitance f = 1MHz 25°C   17   pF
(1) When VS is 4.5V, VD is 1.5V or when VS is 1.5V, VD is 4.5V.