SLVS850A June   2008  – September 2023 TPS2551-Q1

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Revision History
  6. 5 Pin Configurations and Functions
  7. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Typical Characteristics
  8. 7 Parameter Measurement Information
  9. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Overcurrent
      2. 8.3.2 Reverse-Voltage Protection
      3. 8.3.3 FAULT Response
      4. 8.3.4 Undervoltage Lockout (UVLO)
      5. 8.3.5 Enable (EN)
      6. 8.3.6 Thermal Sense
      7. 8.3.7 Device Functional Modes
    4. 8.4 Programming
      1. 8.4.1 Programming the Current-Limit Threshold
  10. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Two-Level Current-Limit Circuit
      2. 9.2.2 Design Requirements
      3. 9.2.3 Detail Design Procedure
        1. 9.2.3.1 Designing Above a Minimum Current Limit
        2. 9.2.3.2 Designing Below a Maximum Current Limit
        3. 9.2.3.3 Input and Output Capacitance
      4. 9.2.4 Auto-Retry Functionality
      5. 9.2.5 Latch-Off Functionality
      6. 9.2.6 Typical Application as USB Power Switch
        1. 9.2.6.1 Design Requirements
          1. 9.2.6.1.1 USB Power-Distribution Requirements
        2. 9.2.6.2 Detail Design Procedure
          1. 9.2.6.2.1 Universal Serial Bus (USB) Power-Distribution Requirements
    3. 9.3 Power Supply Recommendations
      1. 9.3.1 Self-Powered and Bus-Powered Hubs
      2. 9.3.2 Low-Power Bus-Powered and High-Power Bus-Powered Functions
      3. 9.3.3 Power Dissipation and Junction Temperature
    4. 9.4 Layout
      1. 9.4.1 Layout Guidelines
      2. 9.4.2 Layout Example
  11. 10Device and Documentation Support
    1. 10.1 Receiving Notification of Documentation Updates
    2. 10.2 Support Resources
    3. 10.3 Trademarks
    4. 10.4 Electrostatic Discharge Caution
    5. 10.5 Glossary
  12. 11Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information
9.2.6.1.1 USB Power-Distribution Requirements

USB can be implemented in several ways regardless of the type of USB device being developed. Several power-distribution features must be implemented.

  • SPHs must:
    • Current-limit downstream ports
    • Report overcurrent conditions
  • BPHs must:
    • Enable/disable power to downstream ports
    • Power up at <100 mA
    • Limit inrush current (<44 Ω and 10 μF)
  • Functions must:
    • Limit inrush currents
    • Power up at <100 mA

The feature set of the TPS2551 meets each of these requirements. The integrated current-limiting and overcurrent reporting is required by self-powered hubs. The logic-level enable and controlled rise times meet the need of both input and output ports on bus-powered hubs and the input ports for bus-powered functions.