SLUSCA7A November   2015  – July 2022 TPS51216-EP

PRODUCTION DATA  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
  4. 4 Revision History
  5. 5 Description (continued)
  6. 6 Pin Configuration and Functions
  7. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics
    6. 7.6 Typical Characteristics
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 VDDQ Switch Mode Power Supply Control
      2. 8.3.2 VREF and REFIN, VDDQ Output Voltage
      3. 8.3.3 Soft-Start and Powergood
      4. 8.3.4 Power State Control
      5. 8.3.5 Discharge Control
      6. 8.3.6 VTT Overcurrent Protection
      7. 8.3.7 V5IN Undervoltage Lockout (UVLO) Protection
      8. 8.3.8 Thermal Shutdown
    4. 8.4 Device Functional Modes
      1. 8.4.1 MODE Pin Configuration
  9. 9 Application and Implementation
    1. 9.1 Application Information
      1. 9.1.1 D-CAP Mode
      2. 9.1.2 Light-Load Operation
      3. 9.1.3 VTT and VTTREF
      4. 9.1.4 VDDQ Overvoltage and Undervoltage Protection
      5. 9.1.5 VDDQ Overcurrent Protection
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
        1. 9.2.2.1 List of Materials
        2. 9.2.2.2 External Components Selection
      3. 9.2.3 Application Curve
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12Device and Documentation Support
    1. 12.1 Receiving Notification of Documentation Updates
    2. 12.2 Support Resources
    3. 12.3 Trademarks
    4. 12.4 Electrostatic Discharge Caution
    5. 12.5 Glossary
  13. 13Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

8.4.1 MODE Pin Configuration

The TPS51216-EP reads the MODE pin voltage when the S5 signal is raised high and stores the status in a register. A 15-μA current is sourced from the MODE pin during this time to read the voltage across the resistor connected between the pin and GND. Table 8-2 shows resistor values, corresponding switching frequency, and discharge mode configurations.

Table 8-2 MODE Selection
MODE NO.RESISTANCE BETWEEN
MODE AND GND (kΩ)		SWITCHING
FREQUENCY (kHz)		DISCHARGE MODE
3200400Tracking
2100300
168300Non-tracking
047400