SLVSGL3 April   2022 TPSM63603E

PRODUCTION DATA  

  1. Features
  2. Applications
  3. Description
  4. Revision History
  5. Device Comparison Table
  6. Pin Configuration and Functions
  7. Specifications
    1. 7.1  Absolute Maximum Ratings
    2. 7.2  ESD Ratings
    3. 7.3  Recommended Operating Conditions
    4. 7.4  Thermal Information
    5. 7.5  Electrical Characteristics
    6. 7.6  System Characteristics
    7. 7.7  Typical Characteristics
    8. 7.8  Typical Characteristics — VIN = 12 V
    9. 7.9  Typical Characteristics — VIN = 24 V
    10. 7.10 Typical Characteristics — VIN = 36 V
  8. Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1  Input Voltage Range
      2. 8.3.2  Adjustable Output Voltage (FB)
      3. 8.3.3  Input Capacitors
      4. 8.3.4  Output Capacitors
      5. 8.3.5  Switching Frequency (RT)
      6. 8.3.6  Output ON and OFF Enable (EN/SYNC) and VIN UVLO
      7. 8.3.7  Frequency Synchronization (EN/SYNC)
      8. 8.3.8  Spread Spectrum
      9. 8.3.9  Power-Good Monitor (PG)
      10. 8.3.10 Adjustable Switch-Node Slew Rate (RBOOT and CBOOT)
      11. 8.3.11 Internal LDO, VCC Output, and VLDOIN Input
      12. 8.3.12 Overcurrent Protection (OCP)
      13. 8.3.13 Thermal Shutdown
    4. 8.4 Device Functional Modes
      1. 8.4.1 Shutdown Mode
      2. 8.4.2 Standby Mode
      3. 8.4.3 Active Mode
  9. Applications and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Applications
      1. 9.2.1 Design 1 — 3-A Synchronous Buck Regulator for Industrial Applications
        1. 9.2.1.1 Design Requirements
        2. 9.2.1.2 Detailed Design Procedure
          1. 9.2.1.2.1 Custom Design With WEBENCH® Tools
          2. 9.2.1.2.2 Output Voltage Setpoint
          3. 9.2.1.2.3 Switching Frequency Selection
          4. 9.2.1.2.4 Input Capacitor Selection
          5. 9.2.1.2.5 Output Capacitor Selection
          6. 9.2.1.2.6 Other Connections
        3. 9.2.1.3 Application Curves
        4. 9.2.1.4 Design 2 — Inverting Buck-Boost Regulator with a –5-V Output
          1. 9.2.1.4.1 Design Requirements
          2. 9.2.1.4.2 Detailed Design Procedure
            1. 9.2.1.4.2.1 Output Voltage Setpoint
            2. 9.2.1.4.2.2 IBB Maximum Output Current
            3. 9.2.1.4.2.3 Switching Frequency Selection
            4. 9.2.1.4.2.4 Input Capacitor Selection
            5. 9.2.1.4.2.5 Output Capacitor Selection
            6. 9.2.1.4.2.6 Other Connections
            7. 9.2.1.4.2.7 EMI
              1. 9.2.1.4.2.7.1 EMI Plots
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
      1. 11.2.1 Package Specifications
  12. 12Device and Documentation Support
    1. 12.1 Device Support
      1. 12.1.1 Third-Party Products Disclaimer
      2. 12.1.2 Development Support
        1. 12.1.2.1 Custom Design With WEBENCH® Tools
    2. 12.2 Documentation Support
      1. 12.2.1 Related Documentation
    3. 12.3 Receiving Notification of Documentation Updates
    4. 12.4 Support Resources
    5. 12.5 Trademarks
    6. 12.6 Electrostatic Discharge Caution
    7. 12.7 Glossary
  13. 13Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

Design Requirements

For this design example, use the parameters listed in Table 9-1 as the input parameters and follow the design procedures in Section 9.2.1.2.

Table 9-1 Design Example Parameters
Design Parameter Value
Input voltage 24 V
Output voltage 5 V
Output current 0 A to 3 A
Switching frequency 1 MHz

Table 9-2 gives the selected buck module power-stage components with availability from multiple vendors. This design uses an all-ceramic output capacitor implementation.

Table 9-2 List of Materials for Application Circuit 1
Reference Designator Qty Specification Manufacturer(1) Part Number
CIN1, CIN2 2 4.7 µF, 50 V, X7R, 1210, ceramic Taiyo Yuden UMK325B7475KN-TR
TDK CGA6P3X7R1H475K250AB
4.7 µF, 100 V, X7S, 1206, ceramic Murata GRM31CC72A475KE11L
COUT1, COUT2 2 47 µF, 10 V, X7R, 1210, ceramic Murata GRM32ER71A476ME15L
AVX 1210ZC476MAT2A
CVCC 1 1 µF, 16 V, X7R, 0603, ceramic Murata GCM188R71C105KA64J
1 µF, 16 V, X5R, 0402, ceramic Taiyo Yuden EMK105BJ105KVHF
U1 1 TPSM63603E 36-V, 3-A synchronous buck module Texas Instruments TPSM63603ERDLR

More generally, the TPSM63603E module is designed to operate with a wide range of external components and system parameters. However, the integrated loop compensation is optimized for a certain range of output capacitance.