SLAU278AH May   2009  – March 2021

 

  1. 1Read This First
    1. 1.1 How to Use This Manual
    2. 1.1 Information About Cautions and Warnings
    3. 1.1 Related Documentation From Texas Instruments
    4. 1.1 If You Need Assistance
    5. 1.1 Trademarks
  2. 1Get Started Now!
    1. 1.1  Kit Contents, MSP-TS430xx
    2. 1.2  Kit Contents, MSP-FET430xx
    3. 1.3  Kit Contents, MSP-FET
    4. 1.4  Kit Contents, MSP-FET430UIF
    5. 1.5  Kit Contents, MSP-FET430PIF
    6. 1.6  Kit Contents, eZ430-F2013
    7. 1.7  Kit Contents, eZ430-T2012
    8. 1.8  Kit Contents, eZ430-RF2500
    9. 1.9  Kit Contents, eZ430-RF2500T
    10. 1.10 Kit Contents, eZ430-RF2500-SEH
    11. 1.11 Kit Contents, eZ430-Chronos-xxx
    12. 1.12 Kit Contents, FET430F6137RF900
    13. 1.13 Kit Contents, EM430Fx1x7RF900
    14. 1.14 Hardware Installation, MSP-FET and MSP-FET430UIF
    15. 1.15 Hardware Installation, MSP-TS430xxx, MSP-FET430Uxx, FET430F6137RF900, EM430Fx1x7RF900
    16. 1.16 Hardware Installation, eZ430-XXXX, MSP-EXP430G2, MSP-EXP430FR5739, MSPEXP430F5529
    17. 1.17 Important MSP430 Documents on the Web
  3. 2Design Considerations for In-Circuit Programming
    1. 2.1 Signal Connections for In-System Programming and Debugging
    2. 2.2 External Power
    3. 2.3 Bootloader (BSL)
      1.      A Frequently Asked Questions and Known Issues
        1.       A.1 Hardware FAQs
        2.       A.2 Known Issues
          1.        MSP-FET430UIF
          2.        MSP-FET430PIF
            1.         B Hardware
              1.          B.1 MSP-TS430D8
              2.          B.2 MSP-TS430PW14
              3.          B.3 MSP-TS430L092
              4.          B.4 MSP-TS430L092 Active Cable
              5.          B.5 MSP-TS430PW20
              6.          B.6 MSP-TS430RHL20
              7.          B.7 MSP-TS430PW24
              8.          B.8 MSP-TS430RGE24A
              9.          B.9 MSP-TS430DW28
              10.          B.10 MSP-TS430PW28
              11.          B.11 MSP-TS430PW28A
              12.          B.12 MSP-TS430RHB32A
              13.          B.13 MSP-TS430DA38
              14.          B.14 MSP-TS430QFN23x0
              15.          B.15 MSP-TS430RSB40
              16.          B.16 MSP-TS430RHA40A
              17.          B.17 MSP-TS430DL48
              18.          B.18 MSP-TS430PT48
              19.          B.19 MSP-TS430PT48A
              20.          B.20 MSP-TS430RGZ48B
              21.          B.21 MSP-TS430RGZ48C
              22.          B.22 MSP-TS430PM64
              23.          B.23 MSP-TS430PM64A
              24.          B.24 MSP-TS430PM64D
              25.          B.25 MSP-TS430PM64F
              26.          B.26 MSP-TS430RGC64B
              27.          B.27 MSP-TS430RGC64C
              28.          B.28 MSP-TS430RGC64USB
              29.          B.29 MSP-TS430PN80
              30.          B.30 MSP-TS430PN80A
              31.          B.31 MSP-TS430PN80B
              32.          B.32 MSP-TS430PN80C
              33.          B.33 MSP-TS430PN80USB
              34.          B.34 MSP-TS430PZ100
              35.          B.35 MSP-TS430PZ100A
              36.          B.36 MSP-TS430PZ100B
              37.          B.37 MSP-TS430PZ100C
              38.          B.38 MSP-TS430PZ100D
              39.          B.39 MSP-TS430PZ100E
              40.          B.40 MSP-TS430PZ5x100
              41.          B.41 MSP-TS430PZ100USB
              42.          B.42 MSP-TS430PZ100AUSB
              43.          B.43 MSP-TS430PEU128
              44.          B.44 EM430F5137RF900
              45.          B.45 EM430F6137RF900
              46.          B.46 EM430F6147RF900
                1.           C Hardware Installation Guide
                  1.            D Revision History

B.41 MSP-TS430PZ100USB

Due to the use of diodes in the power chain, the voltage on the MSP430F5xx device is approximately 0.3 V lower than is set by the debugging tool. Set the voltage in the IDE to 0.3 V higher than desired; for example, to run the MCU at 3.0 V, set it to 3.3 V.

GUID-78421635-B46D-4C41-9953-52648BF0BEDC-low.gif Figure 4-82 MSP-TS430PZ100USB Target Socket Module, Schematic
GUID-E81D9780-7FB3-46BB-B1F6-054386D159A4-low.gif Figure 4-83 MSP-TS430PZ100USB Target Socket Module, PCB
Table 4-42 MSP-TS430PZ100USB Bill of Materials
Pos.Ref DesNo. Per BoardDescriptionDigi-Key Part No.Comment
1C1, C2012pF, SMD0805DNP: C1, C2
1.1C3, C4247pF, SMD0805
2C6, C7210uF, 6.3V, Tantal Size B511-1463-2-ND
3C5, C11, C13, C14, C195100nF, SMD0805311-1245-2-ND
3.1C10, C12, C18, C170100nF, SMD0805311-1245-2-NDDNP: C10, C12,C18, C17
4C812.2nF, SMD0805
5C91470nF, SMD0805478-1403-2-ND
6D11green LED, SMD0805P516TR-ND
7J1, J2, J3, J4425-pin header, THSAM1029-25-NDDNP: headers and receptacles enclosed with kit. Keep vias free of solder.
: Header
: Receptacle
7.1425-pin header, THSAM1213-25-NDDNP: headers and receptacles enclosed with kit. Keep vias free of solder.
: Header
: Receptacle
8J513-pin header, male, THSAM1035-03-ND
9JP5, JP6, JP7, JP8, JP9, JP1063-pin header, male, THSAM1035-03-NDplace jumpers on pins 2-3
10JP1, JP2, JP432-pin header, male, THSAM1035-02-NDplace jumper on header
11JP313-pin header, male, THSAM1035-03-NDplace jumper on pins 1-2
1210Jumper15-38-1024-NDPlace on: JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8, JP9, JP10
13JTAG114-pin connector, male, THHRP14H-ND
14Q10CrystalMicro Crystal MS1V-T1K 32.768kHz, C(Load) = 12.5pFDNP: Q1. Keep vias free of solder
15Q21CrystalQ2: 4MHz, Buerklin: 78D134
16R3, R72330 Ω, SMD0805541-330ATR-ND
17R1, R2, R4, R6, R8, R9, R1230 Ω, SMD0805541-000ATR-NDDNP: R6, R8, R9, R12
18R101100 Ω, SMD0805Buerklin: 07E500
18R1111M Ω, SMD0603not existing in Rev 1.0
18R5147k Ω, SMD0805541-47000ATR-ND
19U11Socket:IC201-1004-008Manuf.: Yamaichi
20PCB179 x 77 mm2 layers
21Rubber stand off4Buerklin: 20H1724apply to corners at bottom side
22MSP4302MSP430F6638IPZDNP: enclosed with kit. Is supplied by TI
23Insulating disk to Q21Insulating disk to Q2http://www.ettinger.de/Art_Detail.cfm?ART_ARTNUM=70.08.121
24C1614.7 nF SMD0603
27C331220n SMD0603Buerklin: 53D2074
28C35, C36210p SMD0603Buerklin: 56D102
30C381220n SMD0603Buerklin: 53D2074
31C3914u7 SMD0603Buerklin: 53D2086
32C4010.1u SMD0603Buerklin: 53D2068
33D2, D3, D43LL103ABuerklin: 24S3406
34IC71TPD4E004Manu: TI
35LED0JP3QESAM1032-03-NDDNP
36LED1, LED2, LED30LEDCHIPLED_0603FARNELL: 852-9833DNP
37R13, R15, R160470R SMD0603Buerklin: 07E564DNP
38R3311k4 / 1k5 SMD0603Buerklin: 07E612
39R34127R SMD0603Buerklin: 07E444
40R35127R SMD0603Buerklin: 07E444
41R36133k SMD0603Buerklin: 07E740
42S1, S2, S31PBP12225STB-ND     DNP S1 and S2. (Only S3)
43USB11USB_RECEPTACLEFARNELL: 117-7885
44JP1114-pin header, male, THSAM1035-04-NDplace jumper only on Pin 1