SLVUCT4 November   2023

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  6. 2Hardware
    1. 2.1 Test Setup
    2. 2.2 Modification
    3. 2.3 Input Capacitor C8
    4. 2.4 Precautions
  7. 3Hardware Design Files
    1. 3.1 Schematic
    2. 3.2 PCB Layout
    3. 3.3 Bill of Materials
  8. 4Additional Information
    1.     Trademarks

3.2 PCB Layout

The TPS61377 EVM board is a 4-layer, 2 oz copper thick PCB. All the components are placed on the top layer. Figure 4-2 and Figure 4-3 show the top view and bottom view, respectively. Figure 4-4 and Figure 4-5 show the inner layer 1 and inner layer 2, respectively.

GUID-20231106-SS0I-CXCV-4LL7-TNDN5BBT8D5M-low.svg Figure 3-2 Top-Side Layout
GUID-20231106-SS0I-TFGL-59RX-VZTRPSQTVNFG-low.svg Figure 3-3 Bottom-Side Layout
GUID-20231106-SS0I-DZXZ-TNWJ-SMCX823FMB5R-low.svg Figure 3-4 Inner Layer 1 Layout
GUID-20231106-SS0I-2KJV-FDKR-JB2NGCBXDJ9X-low.svg Figure 3-5 Inner Layer 2 Layout